| Most common failures | No# failures |
|---|
| Headlamp aim out of alignment | 16 |
| Horn not working |1.7.3a| | 6 |
| Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 5 |
| Rear Brake excessively binding (1.2.1 (f)) | 5 |
| Exhaust is leaking and excessively noisey |7.1.1b| | 4 |
| Registration plate issues | 4 |
| Front Roller brake test indicates a binding brake |3.3.A1a| | 4 |
| Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 4 |
| Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 3 |
| Stop lamp remains on when the brakes are released | 3 |
| Nearside Handlebar mounting clamp loose |2.1.1a| | 3 |
| Nearside Front Direction indicator not working |1.5.1c| | 3 |
| Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 3 |
| Rear Floor brake test indicates a binding brake |3.3.C2c| | 3 |
| Rear Stop lamp remains on when the brake is released |1.3.1e| | 3 |
| Front Front wheel bearings have excessive free play |2.3.5b| | 3 |
| Rear Roller brake test indicates a binding brake |3.3.A1a| | 3 |
| Front position lamp does not illuminate immediately when switched on |1.1.3a| | 2 |
| Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
| Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 2 |
| Front Roller brake test indicates a sticking brake |3.3.A1a| | 2 |
| Front wheel bearings have excessive free play |2.3.5b| | 2 |
| Front Brake lever has inadequate reserve travel |3.1.3b| | 2 |
| Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 2 |
| Hazard warning switch missing |1.4.B.1d| | 2 |
| Front Position lamp not working (4.2.1 (a)) | 2 |
| Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
| Front Brake excessively binding |1.2.1 |f|| | 1 |
| Nearside Rear Direction indicator flashing less than 60 times a minute |1.5.1c| | 1 |
| Exhaust excessively deteriorated collector |7.1.1a| | 1 |
| Brake pedal has inadequate reserve travel |3.1.3b| | 1 |
| Nearside Rear Footrest insecure |6.2.1a| | 1 |
| Headlamp aim beam image kick-up is to the offside |1.6.1| | 1 |
| Brake pedal cannot be released smoothly |3.1.3d| | 1 |
| Nearside Rear Direction indicator not working |1.5.1c| | 1 |
| Offside Rear Direction indicator not working |1.5.1c| | 1 |
| Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 1 |
| Rear Roller brake test indicates a sticking brake |3.3.A1a| | 1 |
| Rear Brake pedal cannot be released smoothly |3.1.3d| | 1 |
| Centre Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
| Nearside Handlebar mounting clamp bolt loose |2.1.1a| | 1 |
| Rear Brake caliper|s| securing bolt|s| missing |3.2.A1j| | 1 |
| Nearside Rear Direction indicators not working |1.5.1c| | 1 |
| Exhaust excessively deteriorated |7.1.1a| | 1 |
| Stop lamp remains on when the brake is released |1.3.1e| | 1 |
| Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
| Throttle operating incorrectly sticks wont return |6.2.1f| | 1 |
| Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 1 |
| Offside Handlebar mounting clamp loose |2.1.1a| | 1 |
| Steering control fouling between components which interferes with the free movement of the steering |2.1.2a| | 1 |
| Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
| Nearside Rear Footrest missing |6.2.1a| | 1 |
| Offside Rear Footrest missing |6.2.1a| | 1 |
| Front wheel spindle securing nut locking device insecure |2.3.5a| | 1 |
| Headlamp insecure |1.2.3b| | 1 |
| Rear Brake pedal insecure |3.1.2a| | 1 |
| Front Floor brake test indicates a sticking brake |3.3.C2c| | 1 |
| Stop lamp affected by the operation of another lamp |1.3.2| | 1 |
| Direction indicator not working intermitant |1.5.1c| | 1 |
| Rear suspension component excessively corroded. rear swingarm |2.4.A.1a| | 1 |
| Front Floor brake test indicates a binding brake |3.3.C2c| | 1 |
| Front Steering system excessively rough |2.2.D.1| | 1 |
| Rear Parking brake lever has no reserve travel |3.1.6b| | 1 |
| Rear parking brake recording little or no effort | 1 |
| Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
| Rear suspension has corrosion which reduces the strength of a load bearing member or its supporting structure. |2.4.A.2d| | 1 |
| Hazard warning lamps not fitted |1.4.B.1a| | 1 |
| Parking brake lever is located so that it cannot be satisfactorily operated from the driver`s seat |3.1.3c| | 1 |
| Front Headlamp aim beam image obviously incorrect |1.8.A.1b| | 1 |
| Parking brake: efficiency below requirements |3.7.B.7| | 1 |
| Rear suspension movement is excessively stiff |2.4.A.3b| | 1 |
| Rear Brake hose stretched by suspension movement |3.2.B3b| | 1 |
| Offside Rear Wheel nut|s| loose |4.2.A.1e| | 1 |
| Rear Rear fog lamp missing |1.3.2a| | 1 |
| Front Headlamp missing |1.7.3| | 1 |
| Rear Footrest missing |9.6.1| | 1 |
| Rear IMPORTANT. Do not use failure or PRS against this item. For other suspension defects please enter 5190 in the `Find item` box above. |9.2| | 1 |
| Offside Front brake disc contaminated by oil |3.5.1h| | 1 |
| Exhaust has a major leak of exhaust gases |7.1.2| | 1 |
| Rear reflector on motorcycle missing |1.4.1| | 1 |
| Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
| Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
| Offside Outer Rear Direction indicator not working |1.5.1c| | 1 |
| Handlebar mounting clamp bolt loose |2.1.1a| | 1 |
| Nearside Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
| Offside Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
| Headlamp aim beam image kick up to the offside |1.6| | 1 |
| Front Wheel bearing rough when rotated |5.1.3 |b| |i|| | 1 |
| Front Wheel bearing has excessive play |5.1.3 |a| |i|| | 1 |
| Fuel tank leaking excessively or a risk of fire (6.1.3 (b) (ii)) | 1 |
| Front Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 1 |
| Rear Brake excessively binding Binding up to 20kg on rolling road (1.2.1 (f)) | 1 |
| Rear Shock absorber has negligible damping effect both rear shocks (5.3.2 (b)) | 1 |
| Fuel system component leaking (6.1.3 (b) (i)) | 1 |
| Front Brake excessively binding (1.2.1 (f)) | 1 |
| Nearside Handlebar grip insecure to handlebar (2.2.1 (d) (ii)) | 1 |
| Offside Steering operation fouling on the fuel tank or bodywork on full lock (2.1.4 (b)) | 1 |
| Fork yoke insecure Stem Bolt Loose (2.2.2 (d) (i)) | 1 |
| All direction indicators not working (4.4.1 (a) (ii)) | 1 |
| Rear reflector missing (4.8.2 (a) (ii)) | 1 |
| Rear Position lamp not working (4.2.1 (a)) | 1 |
| Registration plate lamp issues | 1 |