Most common failures | No# failures |
---|
Headlamp aim out of alignment | 25 |
Registration plate issues | 11 |
Front wheel bearings have excessive free play |2.3.5b| | 8 |
Rear reflector on motorcycle missing |1.4.1| | 7 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 7 |
Exhaust is leaking and excessively noisey |7.1.1b| | 6 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 6 |
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 6 |
Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 5 |
Headlamp aim beam image kick up to the offside |1.6| | 5 |
Front Brake lever has inadequate reserve travel |3.1.3b| | 4 |
Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 4 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 4 |
Throttle operating incorrectly |6.2.1f| | 3 |
Rear Roller brake test indicates a sticking brake |3.3.A1a| | 3 |
Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 3 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 3 |
Headlamp insecure |1.2.3b| | 2 |
Offside Rear Footrest insecure |6.2.1a| | 2 |
Rear wheel spindle securing nut locking device missing |2.4.A.2b| | 2 |
Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 2 |
Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 2 |
Horn not working |1.7.3a| | 2 |
Rear Roller brake test indicates a binding brake |3.3.A1a| | 2 |
Fuel system component leaking |7.2.1a| | 2 |
Front Exhaust is leaking and excessively noisey |7.1.1b| | 2 |
Handlebar handgrip not secure to handlebars. |2.1.1c| | 2 |
Brake locking device missing |3.2.A1e| | 2 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 2 |
Front wheel bearings are excessively rough |2.3.5b| | 2 |
Centre Rear Rear wheel bearings have excessive free play |2.4.A.2c| | 2 |
Rear Rear reflector missing (4.8.2 (a) (ii)) | 2 |
Offside Front Brake cylinder leaking hydraulic fluid |3.2.B1e| | 1 |
Nearside Rear Direction indicator insecure |1.5.3b| | 1 |
Offside Rear Footrest missing |6.2.1a| | 1 |
Front Plate brake test indicates a binding brake |3.3.B1a| | 1 |
Rear Roller brake test indicates a severely juddering brake |3.3.A1b| | 1 |
Rear position lamp adversely affected by the operation of another lamp |1.1.3b| | 1 |
Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
Nearside Rear Footrest missing |6.2.1a| | 1 |
Rear Lower Motorcycle structure excessively corroded |6.1.1a| | 1 |
Front Horn not working |1.7.3a| | 1 |
Front Horn not loud enough to be heard by another road user |1.7.3a| | 1 |
Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Nearside Front Direction indicator insecure |1.5.3b| | 1 |
Rear Brake pedal mounting insecure |3.1.2a| | 1 |
Rear Brake pedal pivots excessively worn |3.1.3a| | 1 |
Headlamp aim headlamp deteriorated and function impaired |1.2.3a| | 1 |
Nearside Front Handlebar mounting clamp loose |2.1.1a| | 1 |
Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Centre Rear Rear reflector on motorcycle missing |1.4.1| | 1 |
Wheel alignment incorrect which adversely affects the steering |2.5.1| | 1 |
Nearside Handlebar mounting clamp bolt loose |2.1.1a| | 1 |
Rear Brake pedal has inadequate reserve travel |3.1.3b| | 1 |
Offside Handlebar mounting clamp loose |2.1.1a| | 1 |
Front position lamp incorrect colour |1.1.2a| | 1 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Rear position lamp obscured more than 50% |1.1.1d| | 1 |
Offside Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
Nearside Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
Front Headlamp aim beam image kick-up is to the offside |1.6.1| | 1 |
Offside Rear Direction indicator insecure |1.5.3b| | 1 |
Nearside Front Brake disc|s| excessively pitted |3.2.A1l| | 1 |
Brake pedal pivots excessively worn |3.1.3a| | 1 |
Nearside Front Brake locking device insecure |3.2.A1e| | 1 |
Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
Front Brake disc|s| excessively scored |3.2.A1l| | 1 |
Front Brake disc|s| excessively pitted |3.2.A1l| | 1 |
Front Brake disc|s| excessively worn |3.2.A1l| | 1 |
Front Brake disc|s| securing bolt|s| loose |3.2.A1g| | 1 |
Offside Front Direction indicator not working |1.5.1c| | 1 |
Offside Direction indicator flashing less than 60 times a minute |1.5.1c| | 1 |
Front suspension has excessive stiffness in the suspension movement. |2.3.6b| | 1 |
Offside Indicator switch defective |1.5.4| | 1 |
Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 1 |
Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 1 |
Rear Direction indicator insecure |1.5.3b| | 1 |
Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 1 |
Front Brake lever cannot be applied smoothly |3.1.3d| | 1 |
Offside Front Footrest insecure |6.2.1a| | 1 |
Offside Front Direction indicator insecure |1.5.3b| | 1 |
Stop lamp affected by the operation of another lamp |1.3.2| | 1 |
Front Front wheel bearings have excessive free play |2.3.5b| | 1 |
Front position lamp missing |1.1.1a| | 1 |
Nearside Direction indicator not working |1.5.1c| | 1 |
Offside Direction indicator not working |1.5.1c| | 1 |
Rear reflector on motorcycle damaged and function impaired |1.4.2a| | 1 |
Offside Motorcycle structure excessively damaged |6.1.1a| | 1 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Offside Front wheel spindle securing nut|s| loose |2.3.5a| | 1 |
Rear suspension fouling which affects the movement of the rear suspension |2.4.A.3a| | 1 |
Front position lamp insecure |1.1.1c| | 1 |
Front wheel spindle securing nut locking device insecure |2.3.3a| | 1 |
Direction indicators not working |1.5.1c| | 1 |
Front Floor brake test indicates a sticking brake |3.3.C2c| | 1 |
Front Floor brake test indicates a binding brake |3.3.C2c| | 1 |
Stop lamp not working |1.2.1b| | 1 |
Nearside Mechanical brake component securing device loose |3.5.1i| | 1 |
Shock absorber insecure |2.7.2b| | 1 |
Steering headbearing has excessive free play |2.2.2| | 1 |
Front wheel spindle securing nut|s| loose |2.3.5a| | 1 |
Footrest missing |6.2.1a| | 1 |
Rear reflector missing |1.5.1a| | 1 |
Nearside Stop lamp not working |1.2.1b| | 1 |
Offside Stop lamp not working |1.2.1b| | 1 |
Horn not working |1.6.2a| | 1 |
Front front brake binding |3.7.B.1| | 1 |
Rear brake binding | 1 |
Nearside Rear Upper Macpherson strut insecure |2.4.G.1| | 1 |
Rear Brake clevis joint locking device missing |3.5.1l| | 1 |
Nearside Rear reflector missing |1.5.1a| | 1 |
Offside Rear reflector missing |1.5.1a| | 1 |
Parking brake is not capable of being maintained in operation by direct mechanical action only |3.1.2| | 1 |
front brake binding |3.7.B.1| | 1 |
Rear Brake component is severely distorted |3.1.5| | 1 |
Nearside Front Direction indicator not working |1.5.1c| | 1 |
Rear Roller brake test indicates brake effort rise disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
Rear Roller brake test indicates a severely grabbing brake |3.3.A1b| | 1 |
Rear Brake reaction bracket securing bolt|s| missing |3.2.A1j| | 1 |
Nearside Indicator tell tale not functioning |1.5.2| | 1 |
Brake pedal attachment screws loose |3.1.2b| | 1 |
Footrest insecure |6.2.1a| | 1 |
Front Roller brake test indicates a sticking brake |3.3.A1a| | 1 |
Nearside Rear Footrest insecure |6.2.1a| | 1 |
Steering control fouling between components which interferes with the free movement of the steering fuel tank |2.1.2a| | 1 |
Indicator switch defective |1.5.4| | 1 |
Horn control defective |1.7.2a| | 1 |
Brake pedal operating lever not secure to the pedal |3.3.A.1c| | 1 |
Rear parking brake recording little or no effort | 1 |
Nearside Rear Direction indicator adversely affected by the operation of another lamp |1.4.A.2h| | 1 |
Offside Rear Direction indicator adversely affected by the operation of another lamp |1.4.A.2h| | 1 |
Nearside Rear position lamp|s| adversely affected by the operation of another lamp |1.1.A.3f| | 1 |
Offside Rear position lamp|s| adversely affected by the operation of another lamp |1.1.A.3f| | 1 |
Hydraulic brake cylinder locking device insecure |3.6.A.2d| | 1 |
Nearside Mechanical brake component locking device missing |3.5.1l| | 1 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
Offside Handlebar mounting clamp bolt loose |2.1.1a| | 1 |
Front Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 1 |
Direction indicator insecure |1.5.3b| | 1 |
Roller brake test indicates a binding brake |3.3.A1a| | 1 |
Rear Footrest missing |6.2.1a| | 1 |
Centre Front Brake disc|s| has excessive run out |3.2.A1m| | 1 |
Centre Front Roller brake test indicates a binding brake |3.3.A1a| | 1 |
Centre Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
Centre Front Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 1 |
Centre Rear Footrest insecure |6.2.1a| | 1 |
Rear Brake effort inadequate at a wheel (1.2.1 (a) (i)) | 1 |
Brake pedal has insufficient reserve travel (1.1.2 (a)) | 1 |
Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 1 |
Headlamp not working on main beam (4.1.1 (a) (ii)) | 1 |
Hazard warning lamps not fitted (4.4.1 (d)) | 1 |
Parking brake efficiency less than 50% of the required value (1.4.2 (a) (ii)) | 1 |
Fuel hose leaking excessively or a risk of fire (6.1.3 (b) (ii)) | 1 |
Front Wheel spindle or securing nut(s) so insecure that wheel security or steering control is adversely affected (5.2.1 (c) (ii)) | 1 |
Rear Stop lamp not working (4.3.1 (a) (ii)) | 1 |
Registration plate lamp issues | 1 |
Front Fuel cap leaking Fuel cap / seal leaking, 3/4 full tank. (6.1.3 (b) (i)) | 1 |