| Most common failures | No# failures |
|---|
| Headlamp aim out of alignment | 43 |
| Front Roller brake test indicates a binding brake |3.3.A1a| | 25 |
| Registration plate issues | 21 |
| Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 16 |
| Front Floor brake test indicates a binding brake |3.3.C2c| | 14 |
| Rear reflector on motorcycle missing |1.4.1| | 14 |
| Horn not working |1.7.3a| | 11 |
| Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 11 |
| Front wheel bearings have excessive free play |2.3.5b| | 10 |
| Exhaust is leaking and excessively noisey |7.1.1b| | 10 |
| Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 10 |
| Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 8 |
| Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 6 |
| Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 6 |
| Front position lamp does not illuminate immediately when switched on |1.1.3a| | 5 |
| Front Brake disc|s| excessively worn |3.2.A1l| | 5 |
| Front Brake lever has inadequate reserve travel |3.1.3b| | 5 |
| Rear Roller brake test indicates a binding brake |3.3.A1a| | 4 |
| Fuel tank leaking |7.2.1a| | 4 |
| Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 4 |
| Headlamp aim beam image kick up to the offside |1.6| | 4 |
| Front Front wheel bearings have excessive free play |2.3.5b| | 4 |
| Rear suspension has corrosion which reduces the strength of a load bearing member or its supporting structure. |2.4.A.2d| | 4 |
| Offside Front shock absorber seal failed and leaking oil |2.3.3| | 4 |
| Front Hydraulic brake control feels spongy |3.1.4a| | 4 |
| Rear Brake pedal has inadequate reserve travel |3.1.3b| | 4 |
| Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 4 |
| Brake lever is so short and the brake cannot be readily applied |3.1.3c| | 3 |
| Offside Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 3 |
| Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 3 |
| Rear Floor brake test indicates a sticking brake |3.3.C2c| | 3 |
| Fuel system component leaking |7.2.1a| | 3 |
| Nearside Handlebar mounting clamp bolt loose |2.1.1a| | 3 |
| Rear wheel spindle securing nut locking device missing |2.4.A.2b| | 3 |
| Rear Motorcycle structure excessively corroded |6.1.1a| | 3 |
| Rear Rear reflector on motorcycle missing |1.4.1| | 3 |
| Horn not working |7.7 |a| |ii|| | 3 |
| Front Horn not working |1.7.3a| | 3 |
| Fuel cap does not fasten securely maintaining the sealing arrangement |7.2.2b| | 3 |
| Rear Brake pedal cannot be released smoothly |3.1.3d| | 3 |
| Front Brake disc|s| excessively scored |3.2.A1l| | 2 |
| Stop lamp remains on when the brake is released |1.3.1e| | 2 |
| Nearside Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 2 |
| Offside Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 2 |
| Stop lamp remains on when the brakes are released | 2 |
| Rear position lamp insecure |1.1.1c| | 2 |
| Offside Front Footrest insecure |6.2.1a| | 2 |
| Nearside Front Brake disc|s| excessively worn |3.2.A1l| | 2 |
| Offside Front Brake disc|s| excessively worn |3.2.A1l| | 2 |
| Brake pedal has insufficient reserve movement |3.3.A.5| | 2 |
| Throttle operating incorrectly |6.2.1f| | 2 |
| Parking brake: efficiency below requirements |3.7.B.7| | 2 |
| Nearside Rear Direction indicator not working |4.4.1 |a| |ii|| | 2 |
| Rear Stop lamp remains on when the brake is released |1.3.1e| | 2 |
| Rear wheel bearings have excessive free play |2.4.A.2c| | 2 |
| Centre Exhaust is leaking and excessively noisey |7.1.1b| | 2 |
| Offside Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 2 |
| Steering control fouling between components which interferes with the free movement of the steering |2.1.2a| | 2 |
| Offside Rear Footrest insecure |6.2.1a| | 2 |
| Rear Roller brake test indicates brake effort rise disproportional to brake lever or pedal effort |3.3.A1c| | 2 |
| Sidecar attachment insecure |5.1.1b| | 2 |
| Nearside Front Brake disc|s| excessively pitted |3.2.A1l| | 2 |
| Front Brake excessively binding |1.2.1 |f|| | 2 |
| Rear Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 2 |
| Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 2 |
| Handlebar handgrip not secure to handlebars. |2.1.1c| | 2 |
| Rear position lamp incorrect colour |1.1.2b| | 2 |
| Front Front wheel bearing has excessive play |2.5.A.3c| | 2 |
| Riders seat insecure |6.2.1a| | 2 |
| Nearside Rear Footrest insecure |6.2.1a| | 2 |
| Steering headbearing has excessive free play |2.2.2| | 2 |
| Handlebar mounting clamp bolt loose |2.1.1a| | 2 |
| Horn not loud enough to be heard by another road user |1.7.3a| | 2 |
| Rear suspension component excessively corroded. |2.4.A.1a| | 2 |
| Headlamp insecure |1.2.3b| | 2 |
| Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 2 |
| Brake pedal has inadequate reserve travel |3.1.3b| | 2 |
| Rear Brake locking device insecure |3.2.A1e| | 2 |
| Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 2 |
| Front Front wheel bearings are excessively rough |2.3.5b| | 2 |
| Nearside Rear Direction indicator not working |1.5.1c| | 2 |
| Offside Handlebar mounting clamp bolt loose |2.1.1a| | 2 |
| Rear Roller brake test indicates a severely juddering brake |3.3.A1b| | 2 |
| Offside Rear Direction indicator not working |1.5.1c| | 2 |
| Rear Rear reflector missing (4.8.2 (a) (ii)) | 2 |
| Rear Wheel spindle or securing nut(s) so insecure that wheel security or steering control is adversely affected (5.2.1 (c) (ii)) | 2 |
| Rear Stop lamp not working (4.3.1 (a) (ii)) | 2 |
| Front Stop lamp not working (4.3.1 (a) (ii)) | 2 |
| Indicator switch insecure |1.5.4| | 1 |
| Headlamp switch insecure |1.2.4| | 1 |
| Nearside Front Upper Horn not working |1.7.3a| | 1 |
| Nearside Front Upper Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
| Nearside Rear Lower Brake pedal cannot be released smoothly |3.1.3d| | 1 |
| Nearside Front Upper Front mudguard insecure |2.3.7| | 1 |
| Nearside Inner Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
| Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
| Wheel alignment incorrect which adversely affects the steering |2.5.1| | 1 |
| Front Headlamp aim beam image too far to the right |1.6.4| | 1 |
| Rear Brake component is severely distorted |3.1.5| | 1 |
| Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
| Central Front Wheel bearing play so excessive it is likely to break up |5.1.3 |a| |ii|| | 1 |
| Nearside Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 1 |
| Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 1 |
| Headlamp switch faulty |1.2.4| | 1 |
| Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
| Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
| Headlamp aim not tested |1.6| | 1 |
| Fuel pipe leaking |6.1.3 |b| |i|| | 1 |
| Rear Footrest insecure |6.2.1a| | 1 |
| Nearside Front Footrest insecure |6.2.1a| | 1 |
| Front Brake hose leaking fluid |3.2.B4| | 1 |
| Clutch lever shortened so it cannot be readily operated. |6.2.1g| | 1 |
| Rear Upper Motorcycle structure excessively corroded |6.1.1a| | 1 |
| Rear Brake linkage has abnormal movement due to excessive wear |3.2.A1i| | 1 |
| Footrest insecure |6.2.1a| | 1 |
| Rear suspension has a fracture of a load bearing member or its supporting structure. |2.4.A.2d| | 1 |
| Fuel cap/sealing device sealing washer deteriorated |7.2.4c| | 1 |
| Exhaust system not adequately supported |7.1.1| | 1 |
| Offside Shock absorber has a serious fluid leak |2.7.3| | 1 |
| Steering damper leaking oil |2.2.C.1f| | 1 |
| Fuel pipe leaking |7.2.1a| | 1 |
| Front Brake performance not tested |3.3| | 1 |
| Floor brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.C1b| | 1 |
| Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
| Lower Brake locking device insecure |3.2.A1e| | 1 |
| Nearside Rear Direction indicators not working |1.5.1c| | 1 |
| Rear Brake pedal is positioned so that the brake cannot be readily applied |3.1.3c| | 1 |
| Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 1 |
| Nearside Rear shock absorber insecurely mounted |2.4.A.3b| | 1 |
| Rear Brake reaction bracket insecure |3.2.A1j| | 1 |
| Nearside Sidecar direction indicator not working |1.5.1c| | 1 |
| Nearside Front Brake lever attachment screws loose CLUTCH LEVER LOOSE |3.1.2b| | 1 |
| Nearside Rear Footrest missing |6.2.1a| | 1 |
| Offside Rear Footrest missing |6.2.1a| | 1 |
| Steering control has Insufficient clearance at full lock affecting the riders operation of the controls |2.1.2b| | 1 |
| Nearside Rear Wheel nut|s| missing |4.2.A.1e| | 1 |
| Nearside Rear Rear reflector missing |1.5.1a| | 1 |
| Offside Rear Rear reflector missing |1.5.1a| | 1 |
| Hazard warning lamps not flashing in phase, with ignition on |1.4.B.1f| | 1 |
| Hazard warning lamps not flashing in phase, with ignition off |1.4.B.1f| | 1 |
| Direction indicators adversely affected by the operation of another lamp |1.4.A.2h| | 1 |
| Parking brake efficiency below requirements |3.7.B.7| | 1 |
| Brake cable locking device missing |3.5.1l| | 1 |
| Parking brake is not capable of being maintained in operation by direct mechanical action only |3.1.2| | 1 |
| Parking brake lever defective so that it cannot be satisfactorily operated |3.1.3c| | 1 |
| Rear Suspension arm insecure |2.4.G.1| | 1 |
| Nearside Handlebar so insecure it is likely to become detached |2.2.1 |b| |ii|| | 1 |
| Nearside Front Direction indicator likely to become detached |4.4.1 |c| |ii|| | 1 |
| Nearside Steering control handlebar movement restricted by cables caught on a projection |2.1.2c| | 1 |
| Offside Steering control handlebar movement restricted by cables caught on a projection |2.1.2c| | 1 |
| Front Gradient brake test indicates a binding brake |3.3.D1c| | 1 |
| Rear reflector on motorcycle incorrectly positioned |1.4.2d| | 1 |
| Offside Rear shock absorber insecurely mounted |2.4.A.3b| | 1 |
| Offside Rear Upper Rear shock absorber insecurely mounted |2.4.A.3b| | 1 |
| Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
| Rear Brake linkage has abnormal movement due to maladjustment |3.2.A1i| | 1 |
| Nearside Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
| Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
| Front An item not tested |Manual| | 1 |
| Rear Rear position lamp adversely affected by the operation of another lamp |1.1.3b| | 1 |
| Nearside Rear Brake pipe inadequately clipped |3.6.B.1| | 1 |
| Offside Rear Brake pipe inadequately clipped |3.6.B.1| | 1 |
| Brake pedal spongy |3.3.B.1b| | 1 |
| Parking brake: efficiency below requirements |3.7.C.1b| | 1 |
| Front Steering lock stop maladjusted |2.1.3| | 1 |
| Rear Rear suspension component excessively corroded. |2.4.A.1a| | 1 |
| Stop lamp missing |1.3.3a| | 1 |
| Rear position lamp missing |1.1.1a| | 1 |
| Nearside Motorcycle structure excessively corroded |6.1.1a| | 1 |
| Rear Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
| Nearside Rear Exhaust system insecure |6.1.2 |a|| | 1 |
| Front Roller brake test indicates a sticking brake |3.3.A1a| | 1 |
| Exhaust excessively deteriorated |7.1.1a| | 1 |
| Handlebar mounting clamp loose |2.1.1a| | 1 |
| Nearside Front Handlebar mounting clamp bolt loose |2.1.1a| | 1 |
| Nearside Rear Braking system leaking |3.6.A.1| | 1 |
| Nearside Front position lamp|s| not working |1.1.A.3b| | 1 |
| Steering damper insecure |2.1.2d| | 1 |
| Sidecar wheel bearings have excessive free play |5.2.3c| | 1 |
| Sidecar wheel bearings are excessively rough |5.2.3d| | 1 |
| Offside Front Brake disc|s| excessively pitted |3.2.A1l| | 1 |
| Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition |8.1.1 |a|| | 1 |
| Throttle operating incorrectly |6.2.7 |a| |i|| | 1 |
| Front Wheel has an excessively distorted bead rim. |4.2.2| | 1 |
| Front Roller brake test indicates brake effort fall disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
| Front Stop lamp damaged and function impaired |1.3.3a| | 1 |
| Nearside Lower Motorcycle structure cracked lower motorcycle frame cracked all around |6.1.1a| | 1 |
| Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
| Sidecar wheel alignment has excessive toe-out |5.3.1a| | 1 |
| Front Brake master cylinder fluid level dangerously low |3.2.B1d| | 1 |
| Sidecar suspension movement is excessively stiff |5.2.1| | 1 |
| Sidecar suspension has an insecure unit. |5.2.3a| | 1 |
| Nearside Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
| Offside Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
| Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
| Front Roller brake test indicates a severely grabbing brake |3.3.A1b| | 1 |
| Front Brake hose is likely to be fouled or trapped by moving parts |3.2.B2c| | 1 |
| Rear Footrest missing |6.2.1a| | 1 |
| Headlamp not working on dipped beam |4.1.1 |a| |ii|| | 1 |
| Headlamp not working on main beam |4.1.1 |a| |ii|| | 1 |
| Nearside Integral body structure is fractured and structural rigidity is significantly reduced frame near footrest |6.1.1 |a| |i|| | 1 |
| Nearside Rear IMPORTANT. Do not use failure or PRS against this item. For lighting defects please enter 5000 in the `Find item` box above. |9.1| | 1 |
| Offside Rear IMPORTANT. Do not use failure or PRS against this item. For lighting defects please enter 5000 in the `Find item` box above. |9.1| | 1 |
| Offside Front shock absorber leaking oil |9.2.7b| | 1 |
| brake disc contaminated by oil |3.5.1h| | 1 |
| Nearside rear brake recording little or no effort |3.7.B.5a| | 1 |
| Hazard warning switch missing |1.4.B.1d| | 1 |
| Offside Rear Exhaust system insecure |6.1.2 |a|| | 1 |
| Rear wheel spindle securing nut locking device insecure |2.4.A.2b| | 1 |
| Nearside Handlebar mounting clamp loose |2.1.1a| | 1 |
| Offside Handlebar mounting clamp loose |2.1.1a| | 1 |
| Indicator switch insecure |1.4.A.1| | 1 |
| Direction indicator flashing more than 120 times a minute |1.4.A.2g| | 1 |
| Rear Trikes, quads or pre-68 vehicles, service brake efficiency below requirements |3.7.C.1a| | 1 |
| Rear Brake pedal has insufficient reserve movement |3.3.A.5| | 1 |
| Fuel hose insecure at tank |7.2.1| | 1 |
| Service brake: efficiency below requirements |3.7.B.7| | 1 |
| All position lamps adversely affected by the operation of another lamp |1.1.A.3f| | 1 |
| Front Headlamp adversely affected by the operation of another lamp |1.7.5c| | 1 |
| Nearside Rear Wheel insecure |4.2.A.1c| | 1 |
| Offside Rear Wheel insecure |4.2.A.1c| | 1 |
| Rear reflector not red in colour |1.5.1d| | 1 |
| Stop lamp not working |1.2.1b| | 1 |
| Rear Rear wheel spindle loose |2.4.A.2b| | 1 |
| Nearside Front Brake disc|s| securing bolt|s| loose |3.2.A1g| | 1 |
| Nearside Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
| Nearside Front Brake pipe inadequately supported |3.2.B2b| | 1 |
| Stop lamp does not illuminate immediately a brake applies front brake lever |1.3.1a| | 1 |
| Offside Handlebar mounting clamp bolt missing |2.1.1a| | 1 |
| Horn control defective |1.7.2a| | 1 |
| Offside Front Upper Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
| Inner Front Upper Brake component is excessively corroded |3.1.5| | 1 |
| Offside Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
| Front Wheel alignment incorrect which adversely affects the steering |2.5.1| | 1 |
| Front Stop lamp does not emit a steady light flickers when steering turned. |1.3.1b| | 1 |
| Service brake: efficiency below requirements |3.7.C.1a| | 1 |
| Offside Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
| Offside Rear suspension bush excessively deteriorated |2.4.A2a|i|| | 1 |
| Brake master cylinder leaking hydraulic fluid |3.2.B1e| | 1 |
| Offside Front Direction indicator incorrect colour |1.5.1b| | 1 |
| Offside Rear Direction indicator incorrect colour |1.5.1b| | 1 |
| Front Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 1 |
| Front Headlamp insecure |1.2.3b| | 1 |
| Offside Rear Direction indicator insecure |1.5.3b| | 1 |
| Rear Exhaust excessively deteriorated |7.1.1a| | 1 |
| Front Brake disc|s| excessively pitted |3.2.A1l| | 1 |
| Steering movement excessively stiff with the wheel raised |2.2.1b| | 1 |
| Nearside Rear All direction indicators not working |4.4.1 |a| |ii|| | 1 |
| Front Front position lamp incorrect colour |1.1.2a| | 1 |
| Nearside Front Brake disc contaminated |1.1.14 |b|| | 1 |
| Nearside Front Shock absorber has a serious fluid leak |5.3.2 |b|| | 1 |
| Offside Front Brake lever has insufficient reserve travel |1.1.2 |a|| | 1 |
| Nearside Front Inner Brake disc contaminated painted |1.1.14 |b|| | 1 |
| Nearside Rear Parking brake inoperative on one side |1.4.1 |a|| | 1 |
| Nearside Rear Position lamp not working |4.2.1 |a|| | 1 |
| Nearside Rear Stop lamp|s| not working |4.3.1 |a| |ii|| | 1 |
| Front Brake lever has inadequate reserve travel |9.3.1f| | 1 |
| Nearside Handlebar handgrip not secure to handlebars. |9.2.1a| | 1 |
| Handlebar modified and seriously weakened |9.2.1c| | 1 |
| Front Headlamp aim beam image too far to the left |1.6.4| | 1 |
| Front Wheel bearing has excessive play |5.1.3 |a| |i|| | 1 |
| Front Direction indicator not working |1.5.1c| | 1 |
| Stop lamp deteriorated and function impaired |1.3.3a| | 1 |
| Fuel system component insecure |7.2.1b| | 1 |
| Offside Rear Direction indicator not working |1.4.A.2c| | 1 |
| Horn is not continous or uniform |1.7.3c| | 1 |
| Rear position lamp deteriorated and function impaired |1.1.1b| | 1 |
| Nearside Front Brake cylinder severely corroded |3.2.B1b| | 1 |
| Offside Front Brake cylinder severely corroded |3.2.B1b| | 1 |
| Rear Rear suspension movement is excessively stiff |2.4.A.3b| | 1 |
| Front Front suspension has excessive stiffness in the suspension movement. |2.3.6b| | 1 |
| Rear Brake drum|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
| Front wheel bearings are excessively rough |2.3.5b| | 1 |
| Front Roller brake test indicates brake effort rise disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
| Rear Roller brake test indicates a sticking brake |3.3.A1a| | 1 |
| Front Brake disc|s| excessively worn both front disc`s are below min thickness |3.2.A1l| | 1 |
| Front Roller brake test indicates a binding brake both front brakes are sticking |3.3.A1a| | 1 |
| Centre Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
| Rear reflector on sidecar missing |1.4.1| | 1 |
| Rear Rear shock absorber seal failed and leaking oil both |2.4.A.1c| | 1 |
| Motorcycle structure insecure and likely to affect the correct functioning of the steering or braking top box |6.1.1c| | 1 |
| Front Brake fluid reservoir leaking hydraulic fluid |3.2.B1e| | 1 |
| Horn control not functioning. |1.7.2b| | 1 |
| Offside Front Direction indicators affected by the operation of another lamp |1.5.1c| | 1 |
| Front Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
| Nearside Front Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
| Brake lever has insufficient reserve travel |1.1.2 |a|| | 1 |
| Brake pedal has insufficient reserve travel |1.1.2 |a|| | 1 |
| Brake lever not releasing correctly and functionality of brakes affected |1.1.2 |b| |ii|| | 1 |
| Front Service brake efficiency less than 50% of the required value |1.2.2 |a| |ii|| | 1 |
| Rear Service brake efficiency less than 50% of the required value |1.2.2 |a| |ii|| | 1 |
| Front Service brake excessively binding |1.2.1 |f|| | 1 |
| Stop lamp|s| remains on when the brakes are released |4.3.2 |a| |iii|| | 1 |
| Front Position lamp not working |4.2.1 |a|| | 1 |
| Service brake efficiency below requirements |1.2.2 |a| |i|| | 1 |
| Service brake efficiency less than 50% of the required value |1.2.2 |a| |ii|| | 1 |
| Rear Stop lamp not working |4.3.1 |a| |ii|| | 1 |
| Offside Rear Direction indicators not working |1.5.1c| | 1 |
| Nearside Stop lamp not working |1.2.1b| | 1 |
| Offside Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 1 |
| Offside Front Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
| Offside Direction indicators not working |1.5.1c| | 1 |
| Front Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
| Fuel tank leaking |6.1.3 |b| |i|| | 1 |
| Front Wheel bearing rough when rotated |5.1.3 |b| |i|| | 1 |
| Rear Rear suspension has corrosion which reduces the strength of a load bearing member or its supporting structure. |2.4.A.2d| | 1 |
| Rear Direction indicator insecure |1.5.3b| | 1 |
| Rear Floor brake test indicates a binding brake |3.3.C2c| | 1 |
| Hydraulic brake control feels spongy |3.1.4a| | 1 |
| Headlamp dipped beam affected by the operation of another lamp |1.2.2c| | 1 |
| Headlamp main beam affected by the operation of another lamp |1.2.2c| | 1 |
| Steering movement excessively stiff with the weight on the lower bearing |2.2.1a| | 1 |
| Fuel cap sealing washer deteriorated |7.2.2c| | 1 |
| Nearside Front Floor brake test indicates a binding brake |3.3.C2c| | 1 |
| Offside Front Floor brake test indicates a binding brake |3.3.C2c| | 1 |
| Rear Floor brake test indicates a severely grabbing brake |3.3.C2d| | 1 |
| Front Front mudguard insecure |2.3.7| | 1 |
| Rear Brake locking device missing |3.2.A1e| | 1 |
| Rear suspension movement is excessively stiff |2.4.A.3b| | 1 |
| Front Wheel spindle or securing nut|s| so insecure that wheel security or steering control is adversely affected |5.2.1 |c| |ii|| | 1 |
| Nearside Rear Upper Direction indicator insecure |1.5.3b| | 1 |
| Horn not working (7.7 (a) (ii)) | 1 |
| Front Brake indicates excessive fluctuation of brake effort (1.2.1 (e)) | 1 |
| Rear Brake indicates excessive fluctuation of brake effort (1.2.1 (e)) | 1 |
| Rear Suspension component pin or bush excessively worn Rear Swinging Arm Bushes (5.3.4 (a) (i)) | 1 |
| Drive chain excessively loose (6.1.7 (c) (i)) | 1 |
| Offside Rear Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
| Front Wheel bearing has excessive play (5.1.3 (a) (i)) | 1 |
| Front Brake fluid reservoir fluid level significantly below minimum level (1.1.10 (d) (ii)) | 1 |
| Headlamp insecure (4.1.1 (c)) | 1 |
| Handlebar retaining device loose left side bar (2.2.1 (b) (i)) | 1 |
| Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
| Rear Suspension component corroded and seriously weakened (5.3.3 (b) (i)) | 1 |
| Rear Brake component inadequately mounted (1.1.21 (c)) | 1 |
| Offside Rear Direction indicator not working (4.4.1 (a) (ii)) | 1 |
| Front Stop lamp does not illuminate by the operation of both brake controls (4.3.2 (a) (iii)) | 1 |
| Nearside Front Direction indicator adversely affected by the operation of another lamp (4.4.3 (b)) | 1 |
| Nearside Front Position lamp adversely affected by the operation of another lamp (4.2.3 (b)) | 1 |
| Front Wheel bearing rough when rotated (5.1.3 (b) (i)) | 1 |
| Brake component insecure (1.1.21 (c)) | 1 |
| Throttle operating incorrectly (6.2.7 (a) (i)) | 1 |
| Exhaust has a major leak of exhaust gases (6.1.2 (a)) | 1 |
| Horn not working (7.7 (a)) | 1 |