| Most common failures | No# failures |
|---|
| Headlamp aim out of alignment | 19 |
| Rear reflector on motorcycle missing |1.4.1| | 8 |
| Front wheel bearings have excessive free play |2.3.5b| | 7 |
| Registration plate issues | 4 |
| Horn not working |1.7.3a| | 4 |
| Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 3 |
| Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 3 |
| Fuel hose leaking |7.2.1a| | 3 |
| Front Brake lever has inadequate reserve travel |3.1.3b| | 3 |
| Headlamp insecure |1.2.3b| | 3 |
| Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 2 |
| Front Steering headbearing has excessive free play |2.2.2| | 2 |
| Rear Floor brake test indicates a sticking brake |3.3.C2c| | 2 |
| Brake lever has inadequate reserve travel |3.1.3b| | 2 |
| Front Hydraulic brake control feels spongy |3.1.4a| | 2 |
| Offside Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 2 |
| Rear Roller brake test indicates a severely juddering brake |3.3.A1b| | 2 |
| Front Stop lamp remains on when the brake is released |1.3.1e| | 2 |
| Offside Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
| Offside Handlebar mounting clamp bolt loose |2.1.1a| | 2 |
| Exhaust is leaking and excessively noisey |7.1.1b| | 2 |
| Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
| Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 2 |
| Rear wheel spindle securing nut locking device missing |2.4.A.2b| | 2 |
| Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 2 |
| Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 2 |
| Rear Footrest insecure |6.2.1a| | 2 |
| Offside Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 2 |
| Parking brake: efficiency below requirements |3.7.B.7| | 2 |
| Rear reflector missing |4.8.2 |a| |ii|| | 2 |
| Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 2 |
| Nearside Sidecar wheel spindle loose |5.2.3b| | 1 |
| Rear Motorcycle structure corroded to the extent that the rigidity of the assembly is significantly reduced |6.1.1 |c| |i|| | 1 |
| Rear Brake linkage has abnormal movement due to maladjustment |3.2.A1i| | 1 |
| Offside Front Brake disc|s| is excessively distorted |3.2.A1m| | 1 |
| Front Roller brake test indicates a severely grabbing brake |3.3.A1b| | 1 |
| Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
| Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
| Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
| Front Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
| Stop lamp not working On rear brake |1.2.1b| | 1 |
| Front Headlamp not working on dipped beam |1.7.5a| | 1 |
| Front Headlamp not working on main beam |1.7.5a| | 1 |
| Nearside Rear reflector missing |1.5.1a| | 1 |
| Offside Rear reflector missing |1.5.1a| | 1 |
| Front wheel bearings are excessively rough |2.3.5b| | 1 |
| Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
| Stop lamp affected by the operation of another lamp |1.3.2| | 1 |
| Front position lamp incorrect colour |1.1.2a| | 1 |
| Front Brake caliper|s| securing bolt|s| loose |3.2.A1j| | 1 |
| Headlamp dipped beam affected by the operation of another lamp |1.2.2c| | 1 |
| Headlamp main beam affected by the operation of another lamp |1.2.2c| | 1 |
| Rear position lamp adversely affected by the operation of another lamp |1.1.3b| | 1 |
| Offside Rear Direction indicator insecure |1.5.3b| | 1 |
| Front Motorcycle structure cracked |6.1.1a| | 1 |
| Offside Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
| Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
| Front Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
| Front Headlamp aim not tested |1.6| | 1 |
| Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
| Nearside Front Footrest insecure |6.2.1a| | 1 |
| Front Front wheel bearings have excessive free play |2.3.5b| | 1 |
| Nearside Front Brake hose is likely to be fouled or trapped by moving parts |3.2.B2c| | 1 |
| Offside Front Brake hose is likely to be fouled or trapped by moving parts |3.2.B2c| | 1 |
| Offside Front Direction indicators not working |1.5.1c| | 1 |
| Stop lamp remains on when the brake is released |1.3.1e| | 1 |
| Offside Motorcycle structure excessively corroded |6.1.1a| | 1 |
| Front wheel has a loose wheel bolt|s| |4.2.3a| | 1 |
| Clutch lever bent so it cannot be readily operated. |6.2.1g| | 1 |
| Steering movement excessively stiff with the wheel raised |2.2.1b| | 1 |
| Headlamp aim headlamp deteriorated and function impaired |1.2.3a| | 1 |
| Steering movement excessively stiff with the weight on the lower bearing |2.2.1a| | 1 |
| Front Brake disc|s| excessively worn |3.2.A1l| | 1 |
| Front Shock absorber has a serious fluid leak |2.7.3| | 1 |
| Mechanical brake component has restricted free movement | 1 |
| Registration plate lamp issues | 1 |
| Front Steering system excessively tight |2.2.D.1| | 1 |
| Direction indicators flashing more than 120 times per minute |1.5.1c| | 1 |
| Steering headbearing has excessive free play |2.2.2| | 1 |
| Front Roller brake test indicates a sticking brake |3.3.A1a| | 1 |
| Rear Roller brake test indicates a binding brake |3.3.A1a| | 1 |
| Front Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 1 |
| Nearside Front Brake disc|s| excessively worn |3.2.A1l| | 1 |
| Offside Front Brake disc|s| excessively worn |3.2.A1l| | 1 |
| Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
| Offside Rear Footrest insecure |6.2.1a| | 1 |
| Steering control fouling between components which interferes with the free movement of the steering |2.1.2a| | 1 |
| Front position lamp missing |1.1.1a| | 1 |
| Nearside Rear Direction indicator not working |1.5.1c| | 1 |
| Nearside Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
| Offside Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
| Fuel system component insecure Tank |7.2.1b| | 1 |
| Riders seat insecure |6.2.1a| | 1 |
| Nearside Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 1 |
| Wheel alignment incorrect which adversely affects the steering |2.5.1| | 1 |
| Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
| Rear Stop lamp remains on when the brake is released |1.3.1e| | 1 |
| Offside Front Handlebar mounting clamp bolt loose |2.1.1a| | 1 |
| Rear Brake pedal insecure |3.1.2a| | 1 |
| Nearside Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
| Offside Rear Lower Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 1 |
| Nearside Rear Lower Motorcycle structure cracked |6.1.1a| | 1 |
| Rear Fuel pipe union leaking |7.2.1a| | 1 |
| Offside Front Direction indicator incorrect colour |1.5.1b| | 1 |
| Offside Rear Direction indicator incorrect colour |1.5.1b| | 1 |
| Offside Steering operation fouling on the fuel tank or bodywork on full lock |2.1.4 |b|| | 1 |
| Front Brake indicates excessive fluctuation of brake effort |1.2.1 |e|| | 1 |
| Handlebar so insecure it is likely to become detached |2.2.1 |b| |ii|| | 1 |
| Centre Front Hydraulic brake control feels spongy |3.1.4a| | 1 |
| Nearside Front Front wheel bearings have excessive free play |2.3.5b| | 1 |
| Offside Front Front wheel bearings have excessive free play |2.3.5b| | 1 |
| Nearside Front Front wheel bearings are excessively rough |2.3.5b| | 1 |
| Offside Front Front wheel bearings are excessively rough |2.3.5b| | 1 |
| Front Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 1 |
| Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
| Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 1 |
| Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
| Nearside front brake binding |3.7.B.1| | 1 |
| Offside front brake binding |3.7.B.1| | 1 |
| Parking brake not fitted on at least one wheel on a 3 wheeled vehicle |3.1.1| | 1 |
| Hazard warning lamps not flashing in phase, with ignition on |1.4.B.1f| | 1 |
| Offside Rear Rear fog lamp missing |1.3.2a| | 1 |
| Riders seat insecure |6.2.5 |a| |ii|| | 1 |
| Nearside Rear Direction indicator adversely affected by the operation of another lamp |4.4.3 |b|| | 1 |
| Offside Rear Direction indicator adversely affected by the operation of another lamp |4.4.3 |b|| | 1 |
| Rear Position lamp adversely affected by the operation of another lamp |4.2.3 |b|| | 1 |
| Nearside Rear All direction indicators obviously incorrectly positioned |4.4.3 |a|| | 1 |
| Offside Rear All direction indicators obviously incorrectly positioned |4.4.3 |a|| | 1 |
| Front Upper Exhaust has a major leak of exhaust gases at manifold |6.1.2 |a|| | 1 |
| Rear Brake indicates excessive fluctuation of brake effort judder|Oval drum| |1.2.1 |e|| | 1 |
| Front Brake lever has insufficient reserve travel |1.1.2 |a|| | 1 |
| Offside Front Shock absorber has a serious fluid leak |5.3.2 |b|| | 1 |
| Front Wheel spindle or securing nut|s| so insecure that wheel security or steering control is adversely affected |5.2.1 |c| |ii|| | 1 |
| Rear Wheel fixing loose |single fixing| |5.2.1 |a| |ii|| | 1 |
| Nearside Rear Front position lamp|s| not working And Off side |1.1.A.3b| | 1 |
| Rear Brake pipe inadequately clipped And Front to rear |3.6.B.1| | 1 |
| Front Brake pipe fouled by moving parts To rear |3.6.B.2a| | 1 |
| Rear brake binding | 1 |
| Stop lamp remains on when the brakes are released | 1 |
| Nearside Handlebar grip insecure to handlebar |2.2.1 |d| |ii|| | 1 |
| Rear Brake pedal has insufficient reserve travel |1.1.2 |a|| | 1 |
| Rear Brake pedal not releasing correctly and functionality of brakes affected |1.1.2 |b| |ii|| | 1 |
| Rear Brake excessively binding |1.2.1 |f|| | 1 |
| Roller brake test The less effective brake control does not achieve an efficiency of 25% |1.2.2 |a| |i|| | 1 |
| Front Direction indicator obviously incorrectly positioned both (4.4.3 (a)) | 1 |
| Front Wheel spindle loose (5.2.1 (c) (i)) | 1 |
| Rear Brake excessively binding (1.2.1 (f)) | 1 |
| Front Direction indicator missing Front indicators missing (4.4.1 (a) (ii)) | 1 |
| Steering headbearing has excessive wear or free play Excessive free play in headstock bearings (2.2.2 (f) (i)) | 1 |
| All direction indicators not working (4.4.1 (a) (ii)) | 1 |
| Rear reflector missing (4.8.2 (a) (ii)) | 1 |
| Headlamp light intensity severely reduced (4.1.4 (a)) | 1 |
| Rear Footrest missing rear footrests not fitted (6.2.12 (a)) | 1 |
| Rear Wheel spindle loose castle spindle nut not fitted with splitpin (5.2.1 (c) (i)) | 1 |
| All direction indicators missing (4.4.1 (a) (ii)) | 1 |
| Headlamp aim not tested (4.1.2 (b)) | 1 |
| Nearside Service brake excessively binding (1.2.1 (f)) | 1 |
| Offside Service brake excessively binding (1.2.1 (f)) | 1 |
| Service brake efficiency below requirements (1.2.2 (a) (i)) | 1 |
| Brakes imbalanced across an axle | 1 |
| Brake component insecure Locking device missing (1.1.21 (c)) | 1 |
| Riders seat insecure Fixing screw too short to get a nut on. (6.2.5 (a) (ii)) | 1 |
| Front Wheel bearing so rough it is likely to overheat or break up (5.1.3 (b) (ii)) | 1 |
| Handlebar mounting insecure (2.2.1 (a) (i)) | 1 |
| Motorcycle structure joining/attachment plate or fastening insecure Gear linkage insecure (6.1.1 (b) (i)) | 1 |
| Riders seat insecure (6.2.5 (a) (ii)) | 1 |
| Horn not working (7.7 (a)) | 1 |
| All position lamps not working (4.2.1 (a)) | 1 |
| Headlamp not working on main beam (4.1.1 (a) (ii)) | 1 |
| Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
| Nearside Front Brake disc contaminated (1.1.14 (b)) | 1 |
| Rear Brake component insecure locking device missing from torque arm mounts (1.1.21 (c)) | 1 |