| Most common failures | No# failures |
|---|
| Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 4 |
| Rear reflector on motorcycle missing |1.4.1| | 4 |
| Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 3 |
| Headlamp aim out of alignment | 3 |
| Registration plate issues | 3 |
| Fuel system component leaking |7.2.1a| | 2 |
| Brake hose damaged | 2 |
| Rear Brake pedal has inadequate reserve travel |3.1.3b| | 2 |
| Horn not working |1.7.3a| | 2 |
| Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 2 |
| Rear Floor brake test indicates a sticking brake |3.3.C2c| | 2 |
| Offside Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
| Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
| Rear wheel spindle securing nut locking device missing |2.4.A.2b| | 1 |
| Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
| Nearside Handlebar mounting clamp bolt loose |2.1.1a| | 1 |
| Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
| Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
| Parking brake: efficiency below requirements |3.7.B.7| | 1 |
| Nearside Front Shock absorber has a serious fluid leak |2.7.3| | 1 |
| Offside Front Shock absorber has a serious fluid leak |2.7.3| | 1 |
| Nearside Rear Rear position lamp|s| not working |1.1.A.3b| | 1 |
| Centre Rear Rear position lamp|s| not working |1.1.A.3b| | 1 |
| Stop lamp not working |1.2.1b| | 1 |
| Brake hose has insufficient room to move | 1 |
| Direction indicators not working |1.4.A.2c| | 1 |
| Front Headlamp not working on dipped beam |1.7.5a| | 1 |
| Horn not working |1.6.2a| | 1 |
| Rear Exhaust system not adequately supported |7.1.1| | 1 |
| rear brake recording little or no effort |3.7.B.5a| | 1 |
| Service brake: efficiency below requirements |3.7.B.7| | 1 |
| Front Hydraulic brake control feels spongy |3.1.4a| | 1 |
| Brake pedal insecure |3.1.2a| | 1 |
| Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
| Offside Front Front suspension assembly component missing |2.3.1| | 1 |
| Rear Upper Motorcycle structure adversely modified |6.1.1b| | 1 |
| Front Front wheel bearings have excessive free play |2.3.5b| | 1 |
| Headlamp insecure |1.2.3b| | 1 |
| Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 1 |
| Floor brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.C1b| | 1 |
| Front wheel bearings have excessive free play |2.3.5b| | 1 |
| Hydraulic brake control feels spongy |3.1.4a| | 1 |
| Rear Roller brake test indicates a binding brake |3.3.A1a| | 1 |
| Motorcycle structure excessively damaged |6.1.1a| | 1 |
| Headlamp aim beam image kick up to the offside |1.6| | 1 |
| Rear Rear suspension bearing has excessive free play |2.4.A2a|i|| | 1 |
| Nearside Front Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
| Rear Brake reaction bracket securing bolt|s| loose |3.2.A1j| | 1 |
| Rear Roller brake test indicates a severely grabbing brake |3.3.A1b| | 1 |
| Brake pedal has inadequate reserve travel |3.1.3b| | 1 |
| Rear Brake reaction bracket insecure |3.2.A1j| | 1 |
| Rear Brake locking device missing |3.2.A1e| | 1 |
| Rear Brake back plate|s| securing bolt|s| loose |3.2.A1j| | 1 |
| Front Brake pedal has inadequate reserve travel |3.1.3b| | 1 |
| Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
| Rear Brake pedal insecure |3.1.2a| | 1 |
| Front Exhaust excessively deteriorated |7.1.1a| | 1 |
| Rear Brake indicates excessive fluctuation of brake effort |1.2.1 |e|| | 1 |
| Rear Position lamp not working (4.2.1 (a)) | 1 |