Most common failures | No# failures |
---|
Headlamp aim out of alignment | 19 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 8 |
Rear reflector on motorcycle missing |1.4.1| | 7 |
Registration plate issues | 6 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 6 |
Horn not working |1.7.3a| | 6 |
Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 5 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 5 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 5 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 4 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 4 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 3 |
Rear Brake pedal has inadequate reserve travel |3.1.3b| | 3 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 3 |
Rear suspension bush has excessive free play |2.4.A2a|i|| | 3 |
Front Horn not working |1.7.3a| | 3 |
Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 3 |
Registration plate lamp issues | 3 |
Front shock absorber seal failed and leaking oil |2.3.3| | 3 |
Brake lever has inadequate reserve travel |3.1.3b| | 2 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 2 |
Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 2 |
Steering control has Insufficient clearance at full lock affecting the riders grasp of handlebars |2.1.2b| | 2 |
Rear mono-shock pivot excessively worn |2.4.B.4| | 2 |
Rear Roller brake test indicates a binding brake |3.3.A1a| | 2 |
Front Horn not loud enough to be heard by another road user |1.7.3a| | 2 |
Headlamp aim beam image kick up to the offside |1.6| | 2 |
Rear reflector missing |4.8.2 |a| |ii|| | 2 |
Throttle operating incorrectly |6.2.1f| | 2 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 2 |
Rear Rear reflector on motorcycle missing |1.4.1| | 2 |
Centre Rear Rear reflector on motorcycle missing |1.4.1| | 1 |
Rear shock absorber insecurely mounted |2.4.A.3b| | 1 |
Rear mono-shock pivot seized |2.4.B.4| | 1 |
Rear mono-shock insecure |2.4.B.4| | 1 |
An item not tested |Manual| | 1 |
Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
Headlamp aim headlamp deteriorated and function impaired No low beam pattern or cut off. |1.2.3a| | 1 |
Brake performance not tested |3.3| | 1 |
Front Brake component has an inadequate repair |3.1.5| | 1 |
Plate brake test No brake control achieves an efficiency of 30%. |3.3.B2a| | 1 |
Plate brake test Neither brake control achieves an efficiency of 25% |3.3.B2b| | 1 |
Brake hose damaged | 1 |
Brake component has restricted free movement and operation is likely to be impeded Rear brake lever. |3.2.A1h| | 1 |
Floor brake test indicates a binding brake |3.3.C2c| | 1 |
Headlamp insecure |1.2.3b| | 1 |
Offside Front suspension assembly component excessively corroded. |2.3.1| | 1 |
Nearside Front suspension assembly component excessively corroded. |2.3.1| | 1 |
Nearside Front Brake disc|s| excessively worn |3.2.A1l| | 1 |
Offside Front Brake disc|s| excessively worn |3.2.A1l| | 1 |
Front Front suspension fouling which affects the movement of the front suspension. seal covers |2.3.6a| | 1 |
Handlebar mounting clamp loose |2.1.1a| | 1 |
Drive chain fouling another component |6.2.1d| | 1 |
Front Handlebar deformed |2.1.1b| | 1 |
Front Floor brake test indicates a sticking brake |3.3.C2c| | 1 |
Nearside Direction indicators not working |1.5.1c| | 1 |
Rear Drive chain fouling another component |6.2.1d| | 1 |
Direction indicator missing |1.5.1a| | 1 |
Indicator tell tale not functioning |1.5.2| | 1 |
Offside Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Rear Brake locking device missing |3.2.A1e| | 1 |
Motorcycle structure insecure and likely to affect the correct functioning of the steering or braking |6.1.1c| | 1 |
Rear position lamp adversely affected by the operation of another lamp |1.1.3b| | 1 |
Front Steering headbearing has excessive free play |2.2.2| | 1 |
Horn not working |7.7 |a| |ii|| | 1 |
Front Front suspension has inadequate damping effect. |2.3.6c| | 1 |
Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Rear Brake pedal pivots excessively worn |3.1.3a| | 1 |
Front Front wheel bearings are excessively rough |2.3.5b| | 1 |
Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Horn not loud enough to be heard by another road user |1.7.3a| | 1 |
Nearside Front Brake component has restricted free movement and operation is likely to be impeded |3.2.A1h| | 1 |
Offside Front Brake component has restricted free movement and operation is likely to be impeded |3.2.A1h| | 1 |
Steering control handlebar movement restricted by cables caught on a projection |2.1.2c| | 1 |
Wheel alignment incorrect which adversely affects the handling |2.4 |a|| | 1 |
Offside Front Handlebar deformed |2.1.1b| | 1 |
Front Stop lamp does not emit a steady light |1.3.1b| | 1 |
Front Brake master cylinder leaking hydraulic fluid |3.2.B1e| | 1 |
Rear Roller brake test indicates a sticking brake |3.3.A1a| | 1 |
Stop lamp does not illuminate immediately a brake applies front opperation |1.3.1a| | 1 |
Nearside Rear Direction indicators not working |1.5.1c| | 1 |
Nearside Brake hose leaking fluid |3.2.B4| | 1 |
Offside Front Stop lamp does not illuminate immediately a brake applies switch faulty |1.3.1a| | 1 |
Rear wheel bearings are excessively rough |2.4.A.2c| | 1 |
Front Brake disc|s| has excessive run out |3.2.A1m| | 1 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Front wheel spindle securing nut|s| loose |2.3.3a| | 1 |
Offside Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Front Hydraulic brake control feels spongy |3.1.4a| | 1 |
Fuel tank leaking |7.2.1a| | 1 |
Rear Floor brake test indicates a binding brake |3.3.C2c| | 1 |
Handlebar deformed |2.1.1b| | 1 |
Offside Front Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Inner Front Lower Horn not working |1.7.3a| | 1 |
Outer Front Upper Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Rear wheel spindle loose |2.4.A.2b| | 1 |
Steering control fouling between components which interferes with the free movement of the steering |2.1.2a| | 1 |
Handlebar mounting clamp bolt loose |2.1.1a| | 1 |
Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Front Shock absorber has a serious fluid leak |5.3.2 |b|| | 1 |
Front Brake disc contaminated |1.1.14 |b|| | 1 |
Drive chain excessively loose |6.2.1d| | 1 |
Rear Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
Front Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Centre Front Upper Throttle has a significant change in engine speed whilst moving the steering from lock to lock new cables fitted |2.1.4| | 1 |
Centre Front Upper Throttle operating incorrectly cables not returning so new cables fitted |6.2.1f| | 1 |
Front Front suspension assembly component loose |2.3.1| | 1 |
Rear Exhaust mounting missing |7.1.1c| | 1 |
Offside Front Brake pipe leaking (1.1.11 (b)) | 1 |
Front Brake lever has insufficient reserve travel (1.1.2 (a)) | 1 |
Steering operation impeded by a fairing (2.1.4 (e)) | 1 |
Front Brake disc contaminated (1.1.14 (b)) | 1 |
Rear reflector missing (4.8.2 (a) (ii)) | 1 |
Drive chain excessively loose (6.1.7 (c) (i)) | 1 |
Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i)) | 1 |
Rear Brake has no recorded effort at a wheel (1.2.1 (a) (ii)) | 1 |
Horn not working (7.7 (a) (ii)) | 1 |
Front Horn not working (7.7 (a)) | 1 |
Nearside Front Shock absorber has a serious fluid leak FORK (5.3.2 (b)) | 1 |
Nearside Front Brake excessively binding (1.2.1 (f)) | 1 |
Offside Front Brake excessively binding (1.2.1 (f)) | 1 |