| Most common failures | No# failures |
|---|
| Headlamp aim out of alignment | 10 |
| Horn not working |1.7.3a| | 6 |
| Rear Roller brake test indicates a binding brake |3.3.A1a| | 6 |
| Rear reflector on motorcycle missing |1.4.1| | 4 |
| Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 3 |
| Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 3 |
| Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 3 |
| Drive chain excessively loose |6.2.1d| | 3 |
| Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 3 |
| Drive chain worn to excess |6.2.1e| | 3 |
| Offside Handlebar mounting clamp loose |2.1.1a| | 2 |
| Brake lever has inadequate reserve travel |3.1.3b| | 2 |
| Offside Front Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 2 |
| Front Roller brake test indicates a binding brake |3.3.A1a| | 2 |
| Drive chain excessively tight |6.2.1d| | 2 |
| Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
| Rear Rear wheel spindle securing nut locking device missing |2.4.A.2b| | 2 |
| Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 2 |
| Centre Front Roller brake test indicates a sticking brake |3.3.A1a| | 2 |
| Offside Rear Roller brake test indicates a sticking brake |3.3.A1a| | 2 |
| Centre Rear Rear suspension movement is excessively stiff |2.4.A.3b| | 2 |
| Handlebar mounting clamp loose |2.1.1a| | 2 |
| Rear Brake pedal cannot be released smoothly |3.1.3d| | 2 |
| Front wheel bearings have excessive free play |2.3.5b| | 2 |
| Front Brake component has restricted free movement and operation is likely to be impeded |3.2.A1h| | 2 |
| Rear Roller brake test indicates brake effort rise disproportional to brake lever or pedal effort |3.3.A1c| | 2 |
| Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 2 |
| Rear wheel bearings have excessive free play |2.4.A.2c| | 2 |
| Rear reflector missing (4.8.2 (a) (ii)) | 2 |
| Rear Stop lamp not working (4.3.1 (a) (ii)) | 2 |
| Offside Front Brake disc contaminated (1.1.14 (b)) | 2 |
| Rear Position lamp not working (4.2.1 (a)) | 2 |
| Front Stop lamp remains on when the brake is released |1.3.1e| | 1 |
| Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
| Front Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
| Offside Front Handlebar mounting clamp loose |2.1.1a| | 1 |
| Front Front wheel bearings have excessive free play |2.3.5b| | 1 |
| Rear Rear suspension bearing has excessive free play |2.4.A2a|i|| | 1 |
| Rear Exhaust excessively deteriorated |7.1.1a| | 1 |
| Rear Rear reflector on motorcycle missing |1.4.1| | 1 |
| Rear mono-shock pivot seized |2.4.B.4| | 1 |
| Rear Brake pedal has inadequate reserve travel |3.1.3b| | 1 |
| Front Hydraulic brake control feels spongy |3.1.4a| | 1 |
| Offside Front Brake disc|s| has excessive run out |3.2.A1m| | 1 |
| Rear Stop lamp remains on when the brake is released |1.3.1e| | 1 |
| Front Throttle operating incorrectly |6.2.1f| | 1 |
| Offside Front Brake disc|s| excessively scored |3.2.A1l| | 1 |
| Nearside Front Brake disc|s| excessively scored |3.2.A1l| | 1 |
| Offside Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
| Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
| Rear Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
| Brake disc|s| excessively worn |3.2.A1l| | 1 |
| Fuel system component leaking |7.2.1a| | 1 |
| Rear mono-shock insecure |2.4.B.4| | 1 |
| Front suspension has inadequate damping effect. |2.3.6c| | 1 |
| Rear Brake hose leaking fluid |3.2.B4| | 1 |
| Rear mono-shock pivot excessively worn |2.4.B.4| | 1 |
| Brake hose excessively deteriorated | 1 |
| Fairing so located that it is likely to impede the steering |2.1.2e| | 1 |
| Offside Front Brake lever mounting insecure |3.1.2a| | 1 |
| Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
| Rear suspension component loose |2.4.A.1a| | 1 |
| Nearside Rear Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
| Offside Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
| Fuel hose leaking |7.2.1a| | 1 |
| Rear Floor brake test indicates a binding brake |3.3.C2c| | 1 |
| Front suspension assembly component missing |2.3.1| | 1 |
| Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
| Direction indicators affected by the operation of another lamp |1.5.1c| | 1 |
| Nearside Rear Direction indicators not working |1.5.1c| | 1 |
| Roller brake test indicates a binding brake |3.3.A1a| | 1 |
| Rear Roller brake test indicates a sticking brake |3.3.A1a| | 1 |
| Rear Drive chain sprocket worn to excess |6.2.1e| | 1 |
| Front suspension has excessive stiffness in the suspension movement. |2.3.6b| | 1 |
| Centre Front Horn not working |1.7.3a| | 1 |
| Centre Rear Drive chain excessively loose |6.2.1d| | 1 |
| Centre Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
| Offside Front Steering lock stop ineffective |2.1.3| | 1 |
| Rear wheel has a loose wheel nut|s| |4.2.3a| | 1 |
| Offside Front Direction indicator not working |1.5.1c| | 1 |
| Wheel alignment incorrect which adversely affects the steering |2.5.1| | 1 |
| Nearside Front Roller brake test indicates a binding brake |3.3.A1a| | 1 |
| Offside Front Roller brake test indicates a binding brake |3.3.A1a| | 1 |
| Offside Rear Direction indicators not working |1.5.1c| | 1 |
| Nearside Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
| Nearside Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
| Front Stop lamp not working |4.3.1 |a| |ii|| | 1 |
| Rear Hydraulic brake control feels spongy |3.1.4a| | 1 |
| Headlamp switch insecure |1.2.4| | 1 |
| Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
| Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
| Nearside Rear Direction indicator not working |1.5.1c| | 1 |
| Rear Drive chain excessively loose |6.2.1d| | 1 |
| Drive chain fouling another component |6.2.1d| | 1 |
| Rear Brake master cylinder leaking hydraulic fluid |3.2.B1e| | 1 |
| Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
| Front Handlebar mounting clamp loose |2.1.1a| | 1 |
| Rear wheel bearings are excessively tight |2.4.A.2c| | 1 |
| Rear Brake fluid reservoir fluid level dangerously low |3.2.B1d| | 1 |
| Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
| Rear Brake component has restricted free movement and operation is likely to be impeded |3.2.A1h| | 1 |
| Offside Direction indicator not working |1.5.1c| | 1 |
| Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
| Rear Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
| Offside Front Footrest insecure |6.2.1a| | 1 |
| Offside Front Brake fluid reservoir fluid level dangerously low |3.2.B1d| | 1 |
| Front Motorcycle structure joining/attachment plate or fastening insecure wheel spindle pinch bolt (6.1.1 (b) (i)) | 1 |
| Horn not working (7.7 (a) (ii)) | 1 |
| Front Brake indicates excessive fluctuation of brake effort (1.2.1 (e)) | 1 |
| Nearside Handlebar so insecure it is likely to become detached (2.2.1 (b) (ii)) | 1 |
| Nearside Handlebar grip insecure to handlebar (2.2.1 (d) (ii)) | 1 |
| Registration plate issues | 1 |
| Front Brake excessively binding (1.2.1 (f)) | 1 |
| Rear Brake excessively binding (1.2.1 (f)) | 1 |
| Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
| Offside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
| Fuel system component leaking (6.1.3 (b) (i)) | 1 |
| Front Stop lamp not working (4.3.1 (a) (ii)) | 1 |
| Headlamp not working on main beam (4.1.1 (a) (ii)) | 1 |
| Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 1 |
| Rear Rear reflector missing (4.8.2 (a) (ii)) | 1 |
| Front Brake disc contaminated (1.1.14 (b)) | 1 |
| Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
| Stop lamp does not illuminate by the operation of both brake controls (4.3.2 (a) (iii)) | 1 |
| Front Stop lamp does not illuminate by the operation of both brake controls (4.3.2 (a) (iii)) | 1 |
| Brake lever has insufficient reserve travel (1.1.2 (a)) | 1 |