Most common failures | No# failures |
---|
Headlamp aim out of alignment | 20 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 7 |
Registration plate issues | 7 |
Horn not working |1.7.3a| | 5 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 5 |
Front shock absorber seal failed and leaking oil |2.3.3| | 5 |
Rear Brake pedal has inadequate reserve travel |3.1.3b| | 4 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 4 |
Drive chain excessively loose |6.2.1d| | 4 |
Rear Roller brake test indicates a binding brake |3.3.A1a| | 3 |
Front Stop lamp remains on when the brake is released |1.3.1e| | 3 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 3 |
Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 3 |
Rear suspension movement is excessively stiff |2.4.A.3b| | 3 |
Rear Rear reflector on motorcycle missing |1.4.1| | 3 |
Front Floor brake test indicates a binding brake |3.3.C2c| | 3 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 3 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 3 |
Front Brake lever has inadequate reserve travel |3.1.3b| | 3 |
Front wheel bearings have excessive free play |2.3.5b| | 3 |
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 3 |
Front Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 2 |
Steering headbearing has excessive free play |2.2.2| | 2 |
Steering control fouling between components which interferes with the free movement of the steering |2.1.2a| | 2 |
Rear wheel spindle securing nut locking device missing |2.4.A.2b| | 2 |
Rear suspension bush has excessive free play |2.4.A2a|i|| | 2 |
Nearside Rear Footrest missing |6.2.1a| | 2 |
Offside Rear Footrest missing |6.2.1a| | 2 |
Wheel alignment incorrect which adversely affects the handling |2.5.1| | 2 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 2 |
Front Plate brake test indicates a binding brake |3.3.B1a| | 2 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 2 |
Offside Handlebar handgrip not secure to handlebars. |2.1.1c| | 2 |
Front Brake disc|s| excessively scored |3.2.A1l| | 2 |
Offside Rear Direction indicator not working |1.5.1c| | 2 |
Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 2 |
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 2 |
Rear reflector on motorcycle missing |1.4.1| | 2 |
Drive chain fouling another component |6.2.1d| | 2 |
Front Brake indicates excessive fluctuation of brake effort (1.2.1 (e)) | 2 |
Front Brake indicates excessive fluctuation of brake effort Heavy runout on discs (1.2.1 (e)) | 2 |
Rear reflector missing (4.8.2 (a) (ii)) | 2 |
Front Front suspension has inadequate damping effect. |2.3.6c| | 1 |
Rear Brake caliper|s| insecure |3.2.A1j| | 1 |
Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
Handlebar mounting clamp bolt loose |2.1.1a| | 1 |
Offside Rear Footrest insecure |6.2.1a| | 1 |
Headlamp insecure |1.2.3b| | 1 |
Fuel hose leaking |7.2.1a| | 1 |
Rear Brake pedal mounting insecure |3.1.2a| | 1 |
Brake lever insecure |3.1.2a| | 1 |
Front wheel spindle securing nut locking device insecure |2.3.5a| | 1 |
Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
Horn control defective |1.7.2a| | 1 |
Brake pedal has insufficient reserve travel |1.1.2 |a|| | 1 |
Rear Brake component insecure Locking device. Pedal to master cylinder missing |1.1.21 |c|| | 1 |
Nearside Front Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Rear Rear wheel spindle securing nut locking device missing |2.4.A.2b| | 1 |
Rear Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
Front position lamp incorrect colour |1.1.2a| | 1 |
Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 1 |
Front Brake disc|s| excessively worn |3.2.A1l| | 1 |
Front suspension assembly component missing r/h lower clamp bolt |2.3.1| | 1 |
Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Offside Front Brake component cracked and seriously reduced in strength |3.2.A1| | 1 |
Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Rear Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Nearside Handlebar mounting clamp bolt loose |2.1.1a| | 1 |
Nearside Footrest missing |6.2.1a| | 1 |
Offside Footrest missing |6.2.1a| | 1 |
Fuel system component insecure |7.2.1b| | 1 |
Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
Brake lever has inadequate reserve travel |3.1.3b| | 1 |
Front Hydraulic brake control feels spongy |3.1.4a| | 1 |
Centre Rear Rear reflector on motorcycle missing |1.4.1| | 1 |
Nearside Front Direction indicator not working |1.5.1c| | 1 |
Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
Rear Brake fluid reservoir fluid level dangerously low |3.2.B1d| | 1 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Front Direction indicators not working |1.5.1c| | 1 |
Rear Brake disc|s| excessively scored |3.2.A1l| | 1 |
Rear Brake hose fouling |3.2.B3b| | 1 |
Direction indicators not working |1.5.1c| | 1 |
Centre Rear Lower Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 1 |
Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
Steering movement excessively stiff with the weight on the lower bearing |2.2.1a| | 1 |
Steering movement excessively stiff with the wheel raised |2.2.1b| | 1 |
Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Drive chain worn to excess |6.2.1e| | 1 |
Offside Front Upper Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Offside Handlebar mounting clamp loose |2.1.1a| | 1 |
Front Headlamp aim beam image kick-up is to the offside |1.6.1| | 1 |
Rear Footrest insecure |6.2.1a| | 1 |
Rear suspension component seized |2.4A2a|ii|| | 1 |
Wheel alignment incorrect which adversely affects the steering |2.5.1| | 1 |
Fuel tank leaking |7.2.1a| | 1 |
Fuel cap mounting flange/sealing method defective |7.2.2c| | 1 |
Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 1 |
Lower Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Rear mono-shock pivot excessively worn |2.4.B.4| | 1 |
Front Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Rear Stop lamp does not emit a steady light |1.3.1b| | 1 |
Rear Floor brake test indicates a binding brake |3.3.C2c| | 1 |
Rear Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 1 |
Rear Plate brake test indicates a binding brake |3.3.B1a| | 1 |
Offside Front Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Offside Rear Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Indicator switch insecure |1.5.4| | 1 |
Front Front wheel bearings have excessive free play |2.3.5b| | 1 |
Front wheel bearings are excessively rough |2.3.5b| | 1 |
Nearside Handlebar deformed |2.1.1b| | 1 |
Direction indicators affected by the operation of another lamp |1.5.1c| | 1 |
Rear Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Nearside Front Direction indicator damaged and function impaired |1.5.3a| | 1 |
Front Steering headbearing has excessive free play |2.2.2| | 1 |
Offside Front Front wheel spindle securing nut|s| loose |2.3.3a| | 1 |
Direction indicator flashing less than 60 times a minute |1.5.1c| | 1 |
Headlamp dipped beam affected by the operation of another lamp |1.2.2c| | 1 |
Rear Suspension arm pin or bush excessively worn (5.3.4 (a) (i)) | 1 |
Offside Rear Wheel more than one fixing missing Split pin missing (5.2.1 (a) (ii)) | 1 |
Nearside Rear Direction indicator not working (4.4.1 (a) (ii)) | 1 |
Nearside Handlebar grip insecure to handlebar (2.2.1 (d) (ii)) | 1 |
All direction indicators adversely affected by the operation of another lamp (4.4.3 (b)) | 1 |
Fuel pipe leaking excessively or a risk of fire (6.1.3 (b) (ii)) | 1 |
Rear Brake indicates excessive fluctuation of brake effort (1.2.1 (e)) | 1 |
Front Shock absorber has a serious fluid leak front left fork leaking from anti dive unit (5.3.2 (b)) | 1 |
Front Shock absorber has negligible damping effect front forks not damping (5.3.2 (b)) | 1 |
Front Brake disc contaminated front left disc contaminated from anti dive unit (1.1.14 (b)) | 1 |
Rear Brake component inadequately mounted rear pad clip touching disc (1.1.21 (c)) | 1 |
Stop lamp does not illuminate by the operation of both brake controls Suspect stuck on (4.3.2 (a) (iii)) | 1 |