Most common failures | No# failures |
---|
Headlamp aim out of alignment | 36 |
Drive chain excessively loose |6.2.1d| | 17 |
Exhaust is leaking and excessively noisey |7.1.1b| | 17 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 16 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 16 |
Drive chain sprocket carrier worn to excess |6.2.1e| | 12 |
Throttle operating incorrectly |6.2.1f| | 9 |
Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 9 |
Drive chain worn to excess |6.2.1e| | 9 |
Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 9 |
Rear Roller brake test indicates a binding brake |3.3.A1a| | 9 |
Front wheel bearings have excessive free play |2.3.5b| | 8 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 8 |
Registration plate issues | 7 |
Drive chain excessively tight |6.2.1d| | 7 |
Rear suspension movement is excessively stiff |2.4.A.3b| | 7 |
Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 7 |
Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 7 |
Rear Drive chain sprocket worn to excess |6.2.1e| | 6 |
Horn not working |1.7.3a| | 6 |
Front wheel bearings are excessively rough |2.3.5b| | 6 |
Headlamp aim beam image kick up to the offside |1.6| | 6 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 5 |
Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 5 |
Rear wheel spindle securing nut locking device missing |2.4.A.2b| | 5 |
Rear reflector on motorcycle missing |1.4.1| | 5 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 5 |
Front Floor brake test indicates a binding brake |3.3.C2c| | 5 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 5 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 5 |
Registration plate lamp issues | 5 |
Offside Handlebar deformed |2.1.1b| | 4 |
Nearside Handlebar deformed |2.1.1b| | 4 |
Rear Brake pedal has inadequate reserve travel |3.1.3b| | 4 |
Steering headbearing has excessive free play |2.2.2| | 4 |
Rear suspension bush has excessive free play |2.4.A2a|i|| | 4 |
Offside Handlebar mounting clamp bolt loose |2.1.1a| | 4 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 3 |
Steering movement excessively stiff with the wheel raised |2.2.1b| | 3 |
Wheel alignment incorrect which adversely affects the handling |2.5.1| | 3 |
Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 3 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 3 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 3 |
Rear Brake disc|s| has excessive run out |3.2.A1m| | 3 |
Front Brake component has restricted free movement and operation is likely to be impeded |3.2.A1h| | 3 |
Nearside Front Direction indicator not working |1.5.1c| | 3 |
Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 3 |
Offside Front Direction indicator insecure |1.5.3b| | 3 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 3 |
Front Brake disc|s| excessively worn |3.2.A1l| | 3 |
Front shock absorber seal failed and leaking oil |2.3.3| | 3 |
Front Brake lever is so short and the brake cannot be readily applied |3.1.3c| | 3 |
Front Headlamp aim beam image kick up to the offside |1.6| | 3 |
Front Front wheel bearings have excessive free play |2.3.5b| | 3 |
Nearside Handlebar mounting clamp bolt loose |2.1.1a| | 3 |
Rear Brake indicates excessive fluctuation of brake effort (1.2.1 (e)) | 3 |
Offside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 3 |
Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 3 |
Front Brake excessively binding (1.2.1 (f)) | 3 |
Rear Valve stem seriously damaged (5.2.3 (j)) | 3 |
Offside Handlebar handgrip not secure to handlebars. |2.1.1c| | 2 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 2 |
Rear Drive chain excessively loose |6.2.1d| | 2 |
Centre Exhaust excessively deteriorated |7.1.1a| | 2 |
Centre Exhaust is leaking and excessively noisey |7.1.1b| | 2 |
Rear Roller brake test indicates a sticking brake |3.3.A1a| | 2 |
Offside Steering control has Insufficient clearance at full lock affecting the riders grasp of handlebars |2.1.2b| | 2 |
Nearside Rear Drive chain excessively loose |6.2.1d| | 2 |
Rear Rear suspension bush has excessive free play |2.4.A2a|i|| | 2 |
Front Exhaust is leaking and excessively noisey |7.1.1b| | 2 |
Rear mono-shock pivot seized |2.4.B.4| | 2 |
Rear Rear mono-shock pivot seized |2.4.B.4| | 2 |
Fairings insecure and likely to impede the steering |2.1.2e| | 2 |
Front Brake disc|s| is excessively distorted |3.2.A1m| | 2 |
Brake pedal has inadequate reserve travel |3.1.3b| | 2 |
Rear Brake disc|s| excessively pitted |3.2.A1l| | 2 |
Front Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 2 |
Rear Drive chain sprocket carrier worn to excess |6.2.1e| | 2 |
Front Floor brake test indicates a sticking brake |3.3.C2c| | 2 |
Exhaust has a major leak of exhaust gases |6.1.2 |a|| | 2 |
Rear Rear reflector on motorcycle missing |1.4.1| | 2 |
Rear Brake performance not tested |3.3| | 2 |
Rear Roller brake test indicates a severely juddering brake |3.3.A1b| | 2 |
Front Brake lever has inadequate reserve travel |3.1.3b| | 2 |
Rear Brake disc|s| excessively worn |3.2.A1l| | 2 |
Handlebar mounting clamp bolt loose |2.1.1a| | 2 |
Rear Rear wheel bearings have excessive free play |2.4.A.2c| | 2 |
Exhaust excessively deteriorated |7.1.1a| | 2 |
Front Stop lamp not working (4.3.1 (a) (ii)) | 2 |
Front Valve stem seriously damaged (5.2.3 (j)) | 2 |
Horn not working (7.7 (a) (ii)) | 2 |
Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 2 |
Offside Front Direction indicator likely to become detached (4.4.1 (c) (ii)) | 2 |
Nearside Drive chain sprocket worn to excess |6.2.1e| | 1 |
Rear Drive chain worn to excess |6.2.1e| | 1 |
Front suspension has excessive stiffness in the suspension movement. |2.3.6b| | 1 |
Front Roller brake test indicates a sticking brake |3.3.A1a| | 1 |
Horn not loud enough to be heard by another road user |1.7.3a| | 1 |
Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Headlamp not working on dipped beam |4.1.1 |a| |ii|| | 1 |
Lower Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
Front Brake disc|s| has excessive run out |3.2.A1m| | 1 |
Front Wheel has an excessively eccentric bead rim. |4.2.2| | 1 |
Nearside Front Direction indicator insecure |1.5.3b| | 1 |
Rear mono-shock pivot excessively worn |2.4.B.4| | 1 |
Rear Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Offside Rear Hydraulic brake control feels spongy |3.1.4a| | 1 |
Front Indicator switch defective |1.5.4| | 1 |
Rear Steering movement excessively stiff with the weight on the lower bearing |2.2.1a| | 1 |
Offside Front Handlebar deformed |2.1.1b| | 1 |
Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride split link |6.2.1h| | 1 |
Rear Brake indicates excessive fluctuation of brake effort |1.2.1 |e|| | 1 |
Front Steering control fouling between components which interferes with the free movement of the steering |2.1.2a| | 1 |
Nearside Rear Footrest insecure |6.2.12 |a|| | 1 |
Nearside Rear Exhaust silencer insecure |8.1.1 |b| |i|| | 1 |
Offside Rear Exhaust system insecure |6.1.2 |a|| | 1 |
Floor brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.C1b| | 1 |
Front Brake lever attachment screws missing |3.1.2b| | 1 |
Offside Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Fuel tank leaking |7.2.1a| | 1 |
Nearside Front Lower Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Offside Front Lower Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Brake lever insecure |3.1.2a| | 1 |
Front Front position lamp insecure |1.1.1c| | 1 |
Nearside Steering control has Insufficient clearance at full lock affecting the riders grasp of handlebars |2.1.2b| | 1 |
Front Roller brake test indicates a severely grabbing brake |3.3.A1b| | 1 |
Rear Lower Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Rear Upper Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Front position lamp insecure |1.1.1c| | 1 |
Brake component has restricted free movement and operation is likely to be impeded |3.2.A1h| | 1 |
Front Brake lever attachment screws loose |3.1.2b| | 1 |
Brake pedal mounting insecure |3.1.2a| | 1 |
Steering control has Insufficient clearance at full lock affecting the riders operation of the controls |2.1.2b| | 1 |
Rear Rear suspension fouling which affects the movement of the rear suspension |2.4.A.3a| | 1 |
Outer Rear Lower Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
Lower Rear mono-shock pivot excessively worn |2.4.B.4| | 1 |
Nearside Front Exhaust excessively deteriorated |7.1.1a| | 1 |
Nearside Front Handlebar mounting clamp loose |2.1.1a| | 1 |
Rear Rear suspension bearing has excessive free play |2.4.A2a|i|| | 1 |
Nearside Front Front suspension has inadequate damping effect. |2.3.6c| | 1 |
Offside Front Front suspension has inadequate damping effect. |2.3.6c| | 1 |
Nearside Handlebar mounting clamp loose |2.1.1a| | 1 |
Rear suspension component loose |2.4.A.1a| | 1 |
Brake performance not tested |3.3| | 1 |
Roller brake test No brake control achieves an efficiency of 30%. |3.3.A2a| | 1 |
Roller brake test Neither brake control achieves an efficiency of 25% |3.3.A2b| | 1 |
Nearside Rear Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Offside Rear Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
Offside Front Footrest insecure |6.2.1a| | 1 |
Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Handlebar excessively deformed |2.2.1 |c| |i|| | 1 |
Horn not working |7.7 |a| |ii|| | 1 |
Shock absorber has a serious fluid leak |5.3.2 |b|| | 1 |
Steering headbearing has excessive wear or free play |2.2.2 |f| |i|| | 1 |
Front Direction indicator insecure |1.5.3b| | 1 |
Front Direction indicator damaged and function impaired |1.5.3a| | 1 |
Offside Steering lock stop ineffective |2.1.3| | 1 |
Front Brake lever excessively worn |1.1.15 |b|| | 1 |
Rear Drive chain worn to excess |6.1.7 |c| |i|| | 1 |
Front Headlamp insecure |4.1.1 |c|| | 1 |
Front Headlamp aim not tested |4.1.2 |b|| | 1 |
Front Exhaust has a major leak of exhaust gases |6.1.2 |a|| | 1 |
Front Handlebar fouling on the fuel tank or bodywork on full lock |2.1.4 |b|| | 1 |
Front Handlebar deformed to the extent that steering is affected |2.2.1 |c| |ii|| | 1 |
Rear Brake locking device insecure |3.2.A1e| | 1 |
Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Rear position lamp adversely affected by the operation of another lamp |1.1.3b| | 1 |
Rear suspension component seized |2.4A2a|ii|| | 1 |
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 1 |
Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Rear Roller brake test indicates brake effort rise disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
Rear Brake component has restricted free movement and operation is likely to be impeded |3.2.A1h| | 1 |
Nearside Rear Footrest missing |6.2.1a| | 1 |
Offside Rear Footrest missing |6.2.1a| | 1 |
Front Stop lamp not working |4.3.1 |a| |ii|| | 1 |
Steering headbearing excessively stiff or notchy stiff and notchy |2.2.2 |f| |i|| | 1 |
Suspension arm pin or bush excessively worn seized linkages |5.3.4 |a| |i|| | 1 |
Rear wheel spindle securing nut locking device missing split pin missing |2.4.A.2b| | 1 |
Rear Brake component is excessively corroded |3.1.5| | 1 |
Headlamp insecure |1.2.3b| | 1 |
Rear suspension bearing has excessive free play |2.4.A2a|i|| | 1 |
Nearside Front Handlebar mounting clamp bolt loose |2.1.1a| | 1 |
Nearside Rear Direction indicator not working |1.5.1c| | 1 |
Wheel alignment incorrect which adversely affects the steering |2.5.1| | 1 |
Offside Front Upper Handlebar deformed |2.1.1b| | 1 |
Offside Front Upper Floor brake test indicates a binding brake |3.3.C2c| | 1 |
Rear wheel spindle securing nut locking device insecure |2.4.A.2b| | 1 |
Offside Direction indicators not working |1.5.1c| | 1 |
Offside Rear Footrest insecure |6.2.1a| | 1 |
Front Brake master cylinder leaking hydraulic fluid |3.2.B1e| | 1 |
Nearside Steering lock stop ineffective |2.1.3| | 1 |
Steering movement excessively stiff with the weight on the lower bearing |2.2.1a| | 1 |
Rear Brake disc|s| excessively scored |3.2.A1l| | 1 |
Front Handlebar mounting clamp bolt loose |2.1.1a| | 1 |
Rear Wheel fixing loose |multiple fixings| |5.2.1 |a| |i|| | 1 |
Offside Front Direction indicator not working |1.5.1c| | 1 |
Nearside Front Direction indicator flashing more than 120 times per minute |1.5.1c| | 1 |
Nearside Rear Direction indicator flashing more than 120 times per minute |1.5.1c| | 1 |
Offside Front Direction indicator flashing more than 120 times per minute |1.5.1c| | 1 |
Offside Rear Direction indicator flashing more than 120 times per minute |1.5.1c| | 1 |
Rear Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
Rear Stop lamp does not emit a steady light |1.3.1b| | 1 |
Offside Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Drive chain sprocket worn to excess |6.2.1e| | 1 |
Front Wheel bearing rough when rotated |5.1.3 |b| |i|| | 1 |
Rear Rear suspension bearing excessively deteriorated |2.4A.2a|i|| | 1 |
Front Valve stem seriously damaged |5.2.3 |j|| | 1 |
Throttle operating incorrectly not returning |6.2.7 |a| |i|| | 1 |
Rear Brake excessively binding |1.2.1 |f|| | 1 |
Rear Brake disc significantly and obviously worn |1.1.14 |a| |i|| | 1 |
Fuel pipe leaking |7.2.1a| | 1 |
Upper Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
An item not tested |Manual| | 1 |
Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
Brake lever has inadequate reserve travel |3.1.3b| | 1 |
Front Steering headbearing has excessive free play |2.2.2| | 1 |
Brake hose damaged | 1 |
Rear Brake hose is likely to be fouled or trapped by moving parts |3.2.B2c| | 1 |
Rear Brake hose leaking fluid |3.2.B4| | 1 |
Centre Rear Lower Rear suspension bearing has excessive free play botton shock bearing |2.4.A2a|i|| | 1 |
Rear shock absorber insecurely mounted |2.4.A.3b| | 1 |
Front Drive chain sprocket worn to excess |6.2.1e| | 1 |
Front Brake disc|s| excessively pitted |3.2.A1l| | 1 |
Front Brake effort inadequate at a wheel (1.2.1 (a) (i)) | 1 |
Brake excessively binding FRONT & REAR (1.2.1 (f)) | 1 |
Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i)) | 1 |
Headlamp aim so that beam "kick up" is not visible on the screen (4.1.2 (a)) | 1 |
Headlamp not working on main beam (4.1.1 (a) (ii)) | 1 |
Rear reflector missing (4.8.2 (a) (ii)) | 1 |
Rear Suspension component likely to become detached axle split pin missing (5.3.3 (a) (ii)) | 1 |
Front Headlamp light source and lamp not compatible (4.1.4 (c)) | 1 |
Stop lamp adversely affected by the operation of another lamp (4.3.3 (b)) | 1 |
Wheel alignment incorrect which adversely affects the handling (2.4 (a)) | 1 |
Rear Stop lamp not working Replaced bulb (4.3.1 (a) (ii)) | 1 |
Nearside Rear Wheel bearing has excessive play (5.1.3 (a) (i)) | 1 |
Stop lamp not working (4.3.1 (a) (ii)) | 1 |
Rear Shock absorber has negligible damping effect (5.3.2 (b)) | 1 |
Fuel system component leaking TAP AREA (6.1.3 (b) (i)) | 1 |
Drive chain excessively tight (6.1.7 (k) (i)) | 1 |
Offside Handlebar retaining device loose (2.2.1 (b) (i)) | 1 |
Offside Rear Stop lamp does not illuminate immediately a brake applies (1.3.1a) | 1 |
Front Exhaust has a major leak of exhaust gases (6.1.2 (a)) | 1 |
Rear Exhaust silencer likely to become detached (8.1.1 (b) (ii)) | 1 |
Rear Stop lamp switch with a delay in operation (4.3.2 (a) (ii)) | 1 |
Rear Brake excessively binding (1.2.1 (f)) | 1 |
Nearside Front Handlebar deformed to the extent that steering is affected (2.2.1 (c) (ii)) | 1 |
Central Rear Lower Suspension component pin or bush excessively worn (5.3.4 (a) (i)) | 1 |
Rear Wheel spindle locking device missing (5.2.1 (d)) | 1 |
Exhaust has a major leak of exhaust gases (6.1.2 (a)) | 1 |
Nearside Front Direction indicator likely to become detached (4.4.1 (c) (ii)) | 1 |
Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition (8.1.1 (a)) | 1 |
Throttle operating incorrectly (6.2.7 (a) (i)) | 1 |