>

MOT History from tests of petrol KAWASAKI GPZ500Ss year 1988

Review the list of common KAWASAKI GPZ500S failures below or to perform a specific mot history check on your KAWASAKI then use our popular KnowYourCar service

mot history
Pass percent:68.62%
(The average a petrol KAWASAKI GPZ500S year 1988 passes without issue)
Based on:290 MOT Tests
Most common failuresNo# failures
Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d|9
Headlamp aim out of alignment9
Offside Front shock absorber seal failed and leaking oil |2.3.3|7
Front shock absorber seal failed and leaking oil |2.3.3|5
Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h|5
Front position lamp does not illuminate immediately when switched on |1.1.3a|5
Rear reflector on motorcycle missing |1.4.1|4
Nearside Front shock absorber seal failed and leaking oil |2.3.3|4
Front Roller brake test indicates a binding brake |3.3.A1a|4
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a|4
Throttle operating incorrectly |6.2.1f|4
Stop lamp does not illuminate immediately a brake applies |1.3.1a|4
Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b|4
Exhaust is leaking and excessively noisey |7.1.1b|4
Brake lever has inadequate reserve travel |3.1.3b|3
Rear Brake pedal has inadequate reserve travel |3.1.3b|3
Horn not working |1.7.3a|3
Rear Brake component is severely distorted |3.1.5|3
Rear suspension movement is excessively stiff |2.4.A.3b|3
Drive chain excessively tight |6.2.1d|3
Front Brake lever has inadequate reserve travel |3.1.3b|3
Drive chain excessively loose |6.2.1d|3
Front Front wheel bearings are excessively rough |2.3.5b|2
Steering movement excessively `notchy` with the wheel raised |2.2.1b|2
Drive chain worn to excess |6.2.1e|2
Rear Rear reflector on motorcycle missing |1.4.1|2
Nearside Front Front shock absorber seal failed and leaking oil |2.3.3|2
An item not tested |Manual|2
Rear wheel rotation likely to be impeded |6.2.1b|2
Registration plate issues2
Rear Rear suspension bush has excessive free play |2.4.A2a|i||2
Offside Front Front shock absorber seal failed and leaking oil |2.3.3|2
Front Steering movement excessively `notchy` with the wheel raised |2.2.1b|2
Front Front wheel bearings have excessive free play |2.3.5b|2
Rear suspension bush has excessive free play |2.4.A2a|i||2
Rear shock absorber has inadequate damping effect. |2.4.A.3b|2
Rear Roller brake test indicates a severely juddering brake |3.3.A1b|2
Front suspension has inadequate damping effect. |2.3.6c|2
Steering movement excessively stiff with the wheel raised |2.2.1b|1
Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i||1
Nearside Front Direction indicators not working |1.5.1c|1
Nearside Front Direction indicator insecure |1.5.3b|1
Offside Front Direction indicator insecure |1.5.3b|1
Rear Brake reaction bracket securing bolt|s| loose |3.2.A1j|1
Rear Rear reflector on motorcycle incorrectly positioned |1.4.2d|1
Front Front position lamp does not illuminate immediately when switched on |1.1.3a|1
Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a|1
Upper Steering movement excessively stiff with the wheel raised |2.2.1b|1
Upper Steering movement excessively `notchy` with the wheel raised |2.2.1b|1
Lower Rear suspension bush has excessive free play |2.4.A2a|i||1
Front Hydraulic brake control creeps under load. |3.1.4a|1
Front Hydraulic brake control feels spongy |3.1.4a|1
Horn not loud enough to be heard by another road user |1.7.3a|1
Nearside Stop lamp does not illuminate immediately a brake applies |1.3.1a|1
Horn control defective |1.7.2a|1
Wheel alignment incorrect which adversely affects the handling |2.5.1|1
Rear Floor brake test indicates a severely juddering brake drum oval |3.3C2d.|1
Rear Brake back plate|s| securing bolt|s| loose |3.2.A1j|1
Front Clutch lever positioned so it cannot be readily operated. |6.2.1g|1
Front Exhaust is leaking and excessively noisey |7.1.1b|1
Headlamp switch insecure |1.2.4|1
Nearside Front Brake disc|s| excessively worn |3.2.A1l|1
Offside Front Brake disc|s| excessively worn |3.2.A1l|1
Front An item not tested |Manual|1
Front Floor brake test indicates a binding brake |3.3.C2c|1
Offside Position lamp switch insecure |1.1.4b|1
Nearside Indicator switch insecure |1.5.4|1
Front Brake hose fouling |3.2.B3b|1
Front Brake master cylinder leaking hydraulic fluid |3.2.B1e|1
Rear Seat insecure |6.2.1a|1
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a|1
Rear Brake pedal is so short and the brake cannot be readily applied |3.1.3c|1
Rear Rear suspension movement is excessively stiff |2.4.A.3b|1
Offside Front Direction indicator not working |1.5.1c|1
Front Brake component has restricted free movement and operation is likely to be impeded |3.2.A1h|1
Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a|1
Centre Rear Rear suspension bush has excessive free play |2.4.A2a|i||1
Offside Front Brake lever excessively damaged |3.2.A1c|1
Nearside Rear Drive chain excessively loose |6.2.1d|1
Rear mono-shock pivot excessively worn |2.4.B.4|1
Front Roller brake test indicates a severely juddering brake |3.3.A1b|1
Steering movement excessively stiff with the weight on the lower bearing |2.2.1a|1
Front wheel bearings have excessive free play |2.3.5b|1
Rear Roller brake test indicates a binding brake |3.3.A1a|1
Rear Direction indicators affected by the operation of another lamp integrated into rear light - not allowed |1.5.1c|1
Rear position lamp adversely affected by the operation of another lamp indicators integrated into rear light - not allowed |1.1.3b|1
Rear Brake linkage has abnormal movement due to excessive wear |3.2.A1i|1
Steering headbearing has excessive free play |2.2.2|1
Rear suspension bush has excessive free play middle pivot of banana link |2.4.A2a|i||1
Offside Motorcycle structure adversely modified engine cradle top and bottom bolts loose |6.1.1b|1
Rear Floor brake test indicates a binding brake not releasing correctly |3.3.C2c|1
Rear Brake drum|s| cracked or oval-juddering brake |3.2.A1g|1
Rear wheel bearings have excessive free play |2.4.A.2c|1
Front Brake disc|s| is excessively distorted |3.2.A1m|1
Floor brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.C1b|1
Rear wheel has a loose wheel nut|s| |4.2.3a|1
Offside Rear Footrest insecure |6.2.1a|1
Direction indicators not working |1.5.1c|1
Exhaust excessively deteriorated |7.1.1a|1
Roller brake test No brake control achieves an efficiency of 30%. |3.3.A2a|1
Rear Rear suspension bush excessively deteriorated |2.4.A2a|i||1
Front position lamp incorrect colour |1.1.2a|1
Rear Brake locking device missing |3.2.A1e|1
Rear Roller brake test indicates a severely grabbing brake |3.3.A1b|1
Nearside Exhaust is leaking and excessively noisey |7.1.1b|1
Rear shock absorber seal failed and leaking oil |2.4.A.1c|1
Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4|1
Handlebar mounting clamp loose |2.1.1a|1
Front Brake disc|s| excessively worn |3.2.A1l|1
Front Headlamp deteriorated and function impaired |1.2.3a|1
Nearside Front Steering control has Insufficient clearance at full lock affecting the riders grasp of handlebars |2.1.2b|1
Offside Front Steering control has Insufficient clearance at full lock affecting the riders grasp of handlebars |2.1.2b|1
Rear Wheel alignment incorrect which adversely affects the handling |2.5.1|1
Centre Exhaust is leaking and excessively noisey |7.1.1b|1
Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d|1
Rear Roller brake test indicates brake effort rise disproportional to brake lever or pedal effort |3.3.A1c|1
Rear Brake back plate|s| insecure |3.2.A1j|1
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c|1
Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h|1
Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k|1
Front Brake cylinder leaking hydraulic fluid |3.2.B1e|1
Steering control handlebar movement restricted by trapped cables |2.1.2c|1
Front Front shock absorber seal failed and leaking oil |2.3.3|1
Rear Exhaust is leaking and excessively noisey |7.1.1b|1
Offside Handlebar cracked |2.1.1b|1
Front Brake disc|s| excessively scored |3.2.A1l|1
Nearside Footrest insecure |6.2.1a|1
Lower Rear mono-shock pivot excessively worn |2.4.B.4|1
Front suspension has excessive stiffness in the suspension movement. |2.3.6b|1
Front Brake disc insecure all 6 bolts loose (1.1.14 (a) (ii))1
Wheel spindle or securing nut(s) so insecure that wheel security or steering control is adversely affected (5.2.1 (c) (ii))1

We get to these numbers by trawling through over 1 billion MOT test results since 2004 and crunched the numbers. We remove anything to do with Tyres, as they are model independent and group together common non-model specific issues. We are trying to get to a picture of what models have what issues.

Please note: We take the data from the DVSA. This data is raw and can contain typos and spelling mistakes that garages may have entered while recording a MOT result. Specifically miss-match on names of models and makes. We are constantly cleaning the data so bear with the odd issue.

Got suggestions? We’re improving this section all the time. If you have any suggestions, please let us know.

Find us on Facebook

© KnowYourCar™ 2019. All rights reserved
Except where otherwise noted, content on our MOT statistics pages are licensed under a Creative Commons Attribution 4.0 International license.
You are free to redistribute the material in any medium or format as long as credit is given to KnowYourCar

WARNING: We have placed hidden watermarks in our data. We will take action against our data being used outside of these terms.

MOT Data licensed under the Open Government Licence v3.0

By using our site you are agreeing to our terms and conditions
Terms & Conditions  Privacy Policy