Most common failures | No# failures |
---|
Headlamp aim out of alignment | 22 |
Rear reflector on motorcycle missing |1.4.1| | 17 |
Registration plate issues | 13 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 7 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 6 |
Headlamp aim beam image kick up to the offside |1.6| | 5 |
Rear Roller brake test indicates a binding brake |3.3.A1a| | 5 |
Front Stop lamp remains on when the brake is released |1.3.1e| | 5 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 5 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 5 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 5 |
Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 4 |
Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 4 |
Fuel system component leaking |7.2.1a| | 4 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 3 |
Offside Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 3 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 3 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 3 |
Rear Rear reflector on motorcycle missing |1.4.1| | 3 |
Horn not working |1.7.3a| | 3 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 3 |
Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 3 |
Rear suspension bush has excessive free play |2.4.A2a|i|| | 3 |
Steering headbearing has excessive free play |2.2.2| | 3 |
Rear Stop lamp remains on when the brake is released |1.3.1e| | 3 |
Direction indicators not working |1.5.1c| | 2 |
Nearside Handlebar mounting clamp bolt loose |2.1.1a| | 2 |
Exhaust mounting missing |7.1.1c| | 2 |
Brake lever has inadequate reserve travel |3.1.3b| | 2 |
Offside Front Direction indicator not working |1.5.1c| | 2 |
Drive chain excessively loose |6.2.1d| | 2 |
Throttle operating incorrectly |6.2.1f| | 2 |
Drive chain fouling another component |6.2.1d| | 2 |
Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 2 |
Exhaust is leaking and excessively noisey |7.1.1b| | 2 |
Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 2 |
Front wheel bearings have excessive free play |2.3.5b| | 2 |
Front Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 2 |
Rear reflector missing |4.8.2 |a| |ii|| | 2 |
Handlebar mounting clamp loose |2.1.1a| | 2 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 2 |
Rear Brake disc|s| excessively scored |3.2.A1l| | 2 |
Central Rear Upper Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Nearside Front Lower Horn not working |1.7.3a| | 1 |
Central Rear Lower Suspension component modified so the suspension is inoperative |5.3.3 |c| |ii|| | 1 |
Central Rear Upper Riders seat insecure |6.2.5 |a| |ii|| | 1 |
Offside Handlebar mounting clamp loose |2.1.1a| | 1 |
Direction indicators flashing more than 120 times per minute |1.5.1c| | 1 |
Rear Brake disc|s| excessively pitted |3.2.A1l| | 1 |
Lower Rear suspension bearing has excessive free play |2.4.A2a|i|| | 1 |
Front Direction indicator affected by the operation of another lamp |1.5.1c| | 1 |
Rear Direction indicator not working |1.5.1c| | 1 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Offside Front Brake disc|s| cracked |3.2.A1g| | 1 |
Nearside Front Brake disc|s| cracked |3.2.A1g| | 1 |
Upper Fuel cap sealing washer missing |7.2.2c| | 1 |
Offside Rear Direction indicator not working |1.5.1c| | 1 |
Horn is not continous or uniform |1.7.3c| | 1 |
Rear position lamp adversely affected by the operation of another lamp |1.1.3b| | 1 |
Central Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Brake lever cannot be released smoothly |3.1.3d| | 1 |
Front Decelerometer brake test indicates a binding brake |3.3.E1d| | 1 |
Centre Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
Rear Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
Plate brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.B2b| | 1 |
Rear Brake pipe union leaking fluid |3.2.B4| | 1 |
Rear Exhaust markings indicating not for road use or similar wording |7.1.4| | 1 |
Front Headlamp insecure |1.2.3b| | 1 |
Front Floor brake test indicates a sticking brake |3.3.C2c| | 1 |
Rear Floor brake test indicates a sticking brake |3.3.C2c| | 1 |
Centre Rear Lower Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
Front Front wheel bearings have excessive free play |2.3.5b| | 1 |
Rear Brake cylinder leaking hydraulic fluid |3.2.B1e| | 1 |
Nearside Rear Direction indicator affected by the operation of another lamp |1.5.1c| | 1 |
Offside Front Brake hose leaking fluid |3.2.B4| | 1 |
Nearside Rear Footrest insecure |6.2.1a| | 1 |
Horn missing |1.7.1| | 1 |
Lower Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
Steering control fouling between components which interferes with the free movement of the steering |2.1.2a| | 1 |
Horn not loud enough to be heard by another road user |1.7.3a| | 1 |
Steering movement excessively stiff with the weight on the lower bearing |2.2.1a| | 1 |
Front Front position lamp deteriorated and function impaired |1.1.1b| | 1 |
Steering control handlebar movement restricted by cables caught on a projection |2.1.2c| | 1 |
Rear Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
Rear Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
Rear suspension bush excessively deteriorated |2.4.A2a|i|| | 1 |
Front Hydraulic brake control feels spongy |3.1.4a| | 1 |
Nearside Front Brake disc|s| insecure |3.2.A1g| | 1 |
Centre Rear reflector on motorcycle missing |1.4.1| | 1 |
Front Direction indicator missing |1.5.1a| | 1 |
An item not tested |Manual| | 1 |
Steering control has Insufficient clearance at full lock affecting the riders grasp of handlebars |2.1.2b| | 1 |
Headlamp aim beam image kick-up is to the offside |1.6.1| | 1 |
Front Roller brake test indicates a sticking brake |3.3.A1a| | 1 |
Rear Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Nearside Upper Front suspension assembly component excessively corroded. |2.3.1| | 1 |
Offside Upper Front suspension assembly component excessively corroded. |2.3.1| | 1 |
Nearside Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Nearside Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
Rear Brake component has restricted free movement and operation is likely to be impeded |3.2.A1h| | 1 |
Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Offside Front Brake component leaking fluid |3.2.B4| | 1 |
Horn is not a constant note |1.7.3c| | 1 |
Brake lever cannot be applied smoothly |3.1.3d| | 1 |
Front wheel bearings are excessively rough |2.3.5b| | 1 |
Rear Floor brake test indicates a binding brake |3.3.C2c| | 1 |
Centre Motorcycle structure cracked |6.1.1a| | 1 |
Nearside Rear Direction indicator not working |1.5.1c| | 1 |
Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
Front suspension has excessive stiffness in the suspension movement. |2.3.6b| | 1 |
Rear Footrest missing |6.2.1a| | 1 |
Nearside Rear Direction indicator insecure |1.5.3b| | 1 |
Nearside Footrest insecure |6.2.1a| | 1 |
Offside Footrest insecure |6.2.1a| | 1 |
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Nearside Steering control has Insufficient clearance at full lock affecting the riders grasp of handlebars |2.1.2b| | 1 |
Offside Steering control has Insufficient clearance at full lock affecting the riders grasp of handlebars |2.1.2b| | 1 |
Fuel cap mounting flange/sealing method defective |7.2.2c| | 1 |
Front Brake pipe likely to be fouled or trapped by moving parts |3.2.B2c| | 1 |
Rear Brake pipe excessively chafed |3.2.B2a| | 1 |
Front Brake hose excessively twisted |3.2.B3a| | 1 |
Rear Brake pipe inadequately supported |3.2.B2b| | 1 |
Front wheel insecure |4.2.3b| | 1 |
Front wheel spindle securing nut locking device insecure |2.3.3a| | 1 |
Front Wheel modified significantly reducing the original strength |4.2.1a| | 1 |
Front Lower Front suspension assembly component excessively misaligned |2.3.1| | 1 |
Rear Roller brake test indicates brake effort fall disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
Front Direction indicators not working |1.5.1c| | 1 |
Offside Direction indicator not working Front & Rear |1.5.1c| | 1 |
Rear wheel spindle securing nut locking device missing |2.4.A.2b| | 1 |
Nearside Front Direction indicators not working |1.5.1c| | 1 |
Offside Front Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Offside Front Brake lever has inadequate reserve travel brake lever |3.1.3b| | 1 |
Rear Brake master cylinder leaking hydraulic fluid |3.2.B1e| | 1 |
Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 1 |
Front Brake disc contaminated |1.1.14 |b|| | 1 |
Horn not working |7.7 |a| |ii|| | 1 |
Suspension arm attachment bracket/mounting insecure Swingarm arm bolt loose |5.3.3 |a| |i|| | 1 |
All position lamps do not illuminate immediately when switched on (1.1.3a) | 1 |
Headlamp at least one does not illuminate on dipped beam (1.2.2a(i)) | 1 |
Headlamp at least one does not illuminate on main beam (1.2.2a(ii)) | 1 |
Nearside Front Footrest insecure (6.2.12 (a)) | 1 |
Front Shock absorber has negligible damping effect Front suspension, no damping, rough in operation (5.3.2 (b)) | 1 |
Horn not working (7.7 (a) (ii)) | 1 |
Offside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
Offside Front Brake disc contaminated (1.1.14 (b)) | 1 |
Offside Front Direction indicator not working (4.4.1 (a) (ii)) | 1 |
Headlamp aim projected beam image obviously incorrect kick up to right (4.1.2 (c)) | 1 |
Front Brake lever has inadequate reserve travel (3.1.3b) | 1 |
Front Hydraulic brake control feels spongy (3.1.4a) | 1 |
Nearside Front shock absorber seal failed and leaking oil (2.3.3) | 1 |
Offside Front shock absorber seal failed and leaking oil (2.3.3) | 1 |
Rear Rear reflector on motorcycle missing (1.4.1) | 1 |
Stop lamp remains on when the brakes are released | 1 |
Rear reflector missing (4.8.2 (a) (ii)) | 1 |