Most common failures | No# failures |
---|
Headlamp aim out of alignment | 44 |
Rear reflector on motorcycle missing |1.4.1| | 41 |
Registration plate issues | 36 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 20 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 14 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 14 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 12 |
Drive chain excessively loose |6.2.1d| | 12 |
Rear Roller brake test indicates a binding brake |3.3.A1a| | 12 |
Horn not working |1.7.3a| | 12 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 9 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 9 |
Front Floor brake test indicates a binding brake |3.3.C2c| | 9 |
Throttle operating incorrectly |6.2.1f| | 8 |
Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 8 |
Exhaust is leaking and excessively noisey |7.1.1b| | 8 |
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 7 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 7 |
Front shock absorber seal failed and leaking oil |2.3.3| | 7 |
Rear Floor brake test indicates a binding brake |3.3.C2c| | 6 |
Rear Rear reflector on motorcycle missing |1.4.1| | 6 |
Front wheel bearings have excessive free play |2.3.5b| | 6 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 6 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 6 |
Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 5 |
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 5 |
Front suspension has excessive stiffness in the suspension movement. |2.3.6b| | 5 |
Rear Stop lamp remains on when the brake is released |1.3.1e| | 5 |
Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 4 |
Riders seat insecure |6.2.1a| | 4 |
Rear Brake disc|s| excessively worn |3.2.A1l| | 4 |
Front Hydraulic brake control feels spongy |3.1.4a| | 4 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 4 |
Nearside Steering lock stop ineffective |2.1.3| | 4 |
Drive chain worn to excess |6.2.1e| | 4 |
Rear reflector missing (4.8.2 (a) (ii)) | 4 |
Front Front shock absorber seal failed and leaking oil |2.3.3| | 3 |
Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 3 |
Front Brake lever has inadequate reserve travel |3.1.3b| | 3 |
Rear Hydraulic brake control feels spongy |3.1.4a| | 3 |
Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 3 |
Headlamp aim beam image kick up to the offside |1.6| | 3 |
Front Front wheel bearings have excessive free play |2.3.5b| | 3 |
Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 3 |
Rear Roller brake test indicates a sticking brake |3.3.A1a| | 3 |
Steering headbearing has excessive free play |2.2.2| | 3 |
Front wheel bearings are excessively rough |2.3.5b| | 3 |
Steering control fouling between components which interferes with the free movement of the steering |2.1.2a| | 3 |
Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 3 |
Headlamp insecure |1.2.3b| | 3 |
Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 3 |
Offside Steering lock stop ineffective |2.1.3| | 3 |
Rear suspension bearing has excessive free play |2.4.A2a|i|| | 3 |
Offside Steering control has Insufficient clearance at full lock affecting the riders grasp of handlebars |2.1.2b| | 3 |
Rear Floor brake test indicates a sticking brake |3.3.C2c| | 3 |
Offside Front Brake disc|s| is excessively distorted |3.2.A1m| | 3 |
Roller brake test No brake control achieves an efficiency of 30%. |3.3.A2a| | 2 |
Front Brake disc|s| has excessive run out |3.2.A1m| | 2 |
Centre Rear Rear reflector on motorcycle missing |1.4.1| | 2 |
Offside Front Handlebar deformed |2.1.1b| | 2 |
Nearside Rear Direction indicator not working |1.5.1c| | 2 |
Offside Front Shock absorber has a serious fluid leak |5.3.2 |b|| | 2 |
Rear Brake reaction bracket securing bolt|s| loose |3.2.A1j| | 2 |
Headlamp incorrect colour |1.2.1| | 2 |
Horn control defective |1.7.2a| | 2 |
Front Floor brake test indicates a sticking brake |3.3.C2c| | 2 |
Steering control has Insufficient clearance at full lock affecting the riders grasp of handlebars |2.1.2b| | 2 |
Rear Brake pedal has inadequate reserve travel |3.1.3b| | 2 |
Fuel system component leaking |7.2.1a| | 2 |
Direction indicators not working |1.5.1c| | 2 |
Front Roller brake test indicates a sticking brake |3.3.A1a| | 2 |
Fuel system component insecure |7.2.1b| | 2 |
Wheel alignment incorrect which adversely affects the steering |2.5.1| | 2 |
Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 2 |
Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 2 |
Rear Wheel alignment incorrect which adversely affects the handling |2.5.1| | 2 |
Offside Front Roller brake test indicates a binding brake |3.3.A1a| | 2 |
Nearside Front Roller brake test indicates a binding brake |3.3.A1a| | 2 |
Nearside Direction indicator insecure |1.5.3b| | 2 |
Indicator switch insecure |1.5.4| | 2 |
Front Roller brake test indicates a severely juddering brake |3.3.A1b| | 2 |
Nearside Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 2 |
Rear Drive chain sprocket worn to excess |6.2.1e| | 2 |
Fuel tank leaking |7.2.1a| | 2 |
Nearside Front Brake disc|s| is excessively distorted |3.2.A1m| | 2 |
Rear suspension bush has excessive free play |2.4.A2a|i|| | 2 |
Registration plate lamp issues | 2 |
Offside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 2 |
Offside Front Brake disc contaminated (1.1.14 (b)) | 2 |
Stop lamp not working |4.3.1 |a| |ii|| | 1 |
Offside Rear Brake master cylinder insecurely mounted |3.2.B1a| | 1 |
All direction indicators not working not flashing |4.4.1 |a| |ii|| | 1 |
Rear Rear position lamp insecure |1.1.1c| | 1 |
Nearside Front Handlebar fractured |2.1.1b| | 1 |
Front Headlamp dipped beam flickers when tapped lightly by hand |1.2.2c| | 1 |
Nearside Handlebar deformed |2.1.1b| | 1 |
Nearside Front Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Offside Front Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Centre Rear Rear position lamp missing |1.1.1a| | 1 |
Nearside Front Handlebar deformed |2.1.1b| | 1 |
Nearside Front Direction indicator not working |1.5.1c| | 1 |
Offside Front Throttle operating incorrectly |6.2.1f| | 1 |
Front Front suspension has inadequate damping effect. |2.3.6c| | 1 |
Front Headlamp aim beam image kick up to the offside |1.6| | 1 |
Central Front Brake excessively binding |1.2.1 |f|| | 1 |
Central Rear Brake excessively binding |1.2.1 |f|| | 1 |
Nearside Rear Drive chain excessively loose |6.1.7 |c| |i|| | 1 |
Brake performance not tested |1.2.1 |g|| | 1 |
Brake performance not tested |3.3| | 1 |
An item not tested |Manual| | 1 |
Brake pedal is damaged and the brake cannot be readily applied |3.1.3c| | 1 |
Roller brake test Neither brake control achieves an efficiency of 25% |3.3.A2b| | 1 |
Front Brake component cracked and seriously reduced in strength |3.2.A1| | 1 |
Front Brake component worn and seriously reduced in strength |3.2.A1| | 1 |
Rear Rear reflector missing |4.8.2 |a| |ii|| | 1 |
Rear Direction indicator missing |1.5.1a| | 1 |
Front Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
Motorcycle structure adversely modified |6.1.1b| | 1 |
Steering control handlebar movement restricted by cables caught on a projection |2.1.2c| | 1 |
Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
Offside Front Upper Brake hose excessively twisted |3.2.B3a| | 1 |
Offside Front Lower Brake hose excessively twisted |3.2.B3a| | 1 |
Nearside Steering lock stop ineffective ineffective clearance between hand grip to fuel tank on lock |2.1.3| | 1 |
Offside Rear Lower Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Rear reflector on motorcycle incorrectly positioned |1.4.2d| | 1 |
Brake component defective due to a deliberate modification which significantly reduces the original strength |3.1.5| | 1 |
Brake component has an inadequate repair |3.1.5| | 1 |
Brake locking device missing |3.2.A1e| | 1 |
Front Brake hose is likely to be fouled or trapped by moving parts |3.2.B2c| | 1 |
Offside Rear Direction indicators not working |1.5.1c| | 1 |
Offside Front Direction indicator insecure |1.5.3b| | 1 |
Rear Fuel tank leaking |7.2.1a| | 1 |
Upper Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
Seat insecure |6.2.1a| | 1 |
Front suspension has inadequate damping effect. |2.3.6c| | 1 |
Front Brake fluid reservoir fluid level dangerously low |3.2.B1d| | 1 |
Nearside Rear Footrest missing |6.2.1a| | 1 |
Offside Rear Footrest missing |6.2.1a| | 1 |
Front Roller brake test indicates brake effort rise disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
Nearside Front Lower Brake hose excessively kinked |3.2.B3a| | 1 |
Offside Front Lower Brake hose excessively kinked |3.2.B3a| | 1 |
Offside Front Brake disc|s| excessively pitted |3.2.A1l| | 1 |
Front position lamp missing |1.1.1a| | 1 |
Offside Front Motorcycle structure cracked |6.1.1a| | 1 |
Nearside Motorcycle structure excessively corroded |6.1.1a| | 1 |
Rear Front wheel bearings have excessive free play |2.3.5b| | 1 |
Steering headbearing has excessive wear or free play |2.2.2 |f| |i|| | 1 |
Nearside Front Brake pipe excessively damaged |3.2.B2a| | 1 |
Brake disc|s| excessively worn |3.2.A1l| | 1 |
Drive chain excessively tight |6.2.1d| | 1 |
Headlamp aim headlamp deteriorated and function impaired |1.2.3a| | 1 |
Nearside Steering lock stop maladjusted |2.1.3| | 1 |
Offside Steering lock stop maladjusted |2.1.3| | 1 |
Rear position lamp does not face the rear |1.1.1d| | 1 |
Brake lever is so short and the brake cannot be readily applied |3.1.3c| | 1 |
Headlamp aim beam image too far to the left |1.6.4| | 1 |
Nearside Brake disc|s| excessively pitted |3.2.A1l| | 1 |
Offside Brake disc|s| excessively pitted |3.2.A1l| | 1 |
Fuel pipe leaking |7.2.1a| | 1 |
Rear mono-shock pivot excessively worn |2.4.B.4| | 1 |
Rear Brake cylinder leaking hydraulic fluid |3.2.B1e| | 1 |
Brake pedal has inadequate reserve travel rear brake spongy |3.1.3b| | 1 |
Rear suspension movement is excessively stiff |2.4.A.3b| | 1 |
Front Lower Steering headbearing has excessive free play |2.2.2| | 1 |
Offside Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Front Direction indicator incorrect colour |1.5.1b| | 1 |
Offside Front Brake hose leaking fluid |3.2.B4| | 1 |
Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Front Throttle operating incorrectly |6.2.7 |a| |i|| | 1 |
Nearside Steering control has Insufficient clearance at full lock affecting the riders grasp of handlebars |2.1.2b| | 1 |
Nearside Handlebar mounting clamp loose |2.1.1a| | 1 |
Front Steering movement excessively stiff with the weight on the lower bearing |2.2.1a| | 1 |
Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
Offside Rear Roller brake test indicates a binding brake |3.3.A1a| | 1 |
Front Roller brake test indicates brake effort fall disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
Centre Front Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Rear Seat insecure |6.2.1a| | 1 |
Front Brake component has restricted free movement and operation is likely to be impeded |3.2.A1h| | 1 |
Rear Brake component has restricted free movement and operation is likely to be impeded |3.2.A1h| | 1 |
Nearside Front Brake component leaking fluid |3.2.B4| | 1 |
Front Horn not working |1.7.3a| | 1 |
Front Brake lever attachment screws missing |3.1.2b| | 1 |
Nearside Rear Rear suspension has corrosion which reduces the strength of a load bearing member or its supporting structure. |2.4.A.2d| | 1 |
Front Brake hose excessively twisted |3.2.B3a| | 1 |
Front Wheel spindle loose |5.2.1 |c| |i|| | 1 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
Offside Front Brake disc|s| has excessive run out |3.2.A1m| | 1 |
Front Roller brake test indicates a severely grabbing brake |3.3.A1b| | 1 |
Rear Brake component has an inadequate repair |3.1.5| | 1 |
Fairings insecure and likely to impede the steering |2.1.2e| | 1 |
Rear Roller brake test indicates a severely juddering brake |3.3.A1b| | 1 |
Offside Front Brake pipe union leaking fluid |3.2.B4| | 1 |
Rear Rear wheel insecure |4.2.3b| | 1 |
Rear Rear suspension component cracked |2.4.A.1a| | 1 |
Rear Drive chain worn to excess |6.2.1e| | 1 |
Offside Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
Rear Rear position lamp damaged and function impaired |1.1.1b| | 1 |
All position lamps do not illuminate immediately when switched on |1.1.3a| | 1 |
Front Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
Offside Steering control fouling between components which interferes with the free movement of the steering |2.1.2a| | 1 |
Centre Front Horn not loud enough to be heard by another road user |1.7.3a| | 1 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
Rear Position lamp not working |4.2.1 |a|| | 1 |
Stop lamp not working both |4.3.1 |a| |ii|| | 1 |
Horn not loud enough to be heard by another road user |1.7.3a| | 1 |
Handlebar deformed |2.1.1b| | 1 |
Offside Rear Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 1 |
Front Rear reflector on motorcycle missing |1.4.1| | 1 |
Front Steering control handlebar movement restricted by cables caught on a projection |2.1.2c| | 1 |
Rear Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 1 |
Rear Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
Front Brake disc|s| excessively scored |3.2.A1l| | 1 |
Rear Brake disc|s| excessively scored |3.2.A1l| | 1 |
Centre Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Offside Front Steering lock stop ineffective |2.1.3| | 1 |
Offside Fuel tank leaking |7.2.1a| | 1 |
Offside Front Upper Brake pipe likely to be fouled or trapped by moving parts |3.2.B2c| | 1 |
Rear suspension fouling which affects the movement of the rear suspension |2.4.A.3a| | 1 |
Inner Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Outer Front Fuel tank leaking |7.2.1a| | 1 |
Inner Front Roller brake test indicates a binding brake |3.3.A1a| | 1 |
Handlebar mounting clamp bolt missing |2.1.1a| | 1 |
Nearside Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
Rear Plate brake test indicates a binding brake |3.3.B1a| | 1 |
Front Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Offside Motorcycle structure excessively corroded |6.1.1a| | 1 |
Offside Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Nearside Front Front suspension assembly component missing |2.3.1| | 1 |
Centre Front Front wheel bearings are excessively rough |2.3.5b| | 1 |
Motorcycle structure excessively corroded |6.1.1a| | 1 |
Centre Rear Upper Rear reflector on motorcycle missing |1.4.1| | 1 |
Rear Brake performance not tested |3.3| | 1 |
Offside Handlebar deformed |2.1.1b| | 1 |
Offside Front Brake locking device missing |3.2.A1e| | 1 |
Horn not working |7.7 |a| |ii|| | 1 |
Front position lamp insecure |1.1.1c| | 1 |
Front Brake lever is so short and the brake cannot be readily applied |3.1.3c| | 1 |
Front All position lamps do not illuminate immediately when switched on |1.1.3a| | 1 |
Rear Rear position lamp flickers when tapped lightly by hand |1.1.3c| | 1 |
Rear Brake caliper insecure (1.1.16 (c) (i)) | 1 |
Front Shock absorber has negligible damping effect (5.3.2 (b)) | 1 |
Front Brake fluid significantly below minimum mark (1.1.10 (d) (ii)) | 1 |
Front Brake master cylinder leaking do not drive (1.1.10 (b) (ii)) | 1 |
Pillion seat insecure (6.2.6 (a) (ii)) | 1 |
Brake performance not tested (1.2.1 (g)) | 1 |
Horn sound not in accordance with requirements (7.7 (c)) | 1 |
Fuel tank insecure (6.1.3 (a) (i)) | 1 |
Riders seat insecure (6.2.5 (a) (ii)) | 1 |
Nearside Rear Direction indicator obviously incorrectly positioned must be 180mm apart (4.4.3 (a)) | 1 |
Offside Rear Direction indicator obviously incorrectly positioned must be 180mm apart (4.4.3 (a)) | 1 |
Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 1 |
Brake pedal pivot excessively tight (1.1.1 (a)) | 1 |
Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
Front Brake excessively binding (1.2.1 (f)) | 1 |
Nearside Rear Wheel spindle locking device missing (5.2.1 (d)) | 1 |
Offside Rear Wheel spindle locking device missing (5.2.1 (d)) | 1 |
Rear Stop lamp not working (4.3.1 (a) (ii)) | 1 |
Nearside Handlebar grip insecure to handlebar (2.2.1 (d) (ii)) | 1 |
Offside Handlebar mounting so insecure that steering is adversely affected (2.2.1 (a) (ii)) | 1 |
Headlamp light intensity severely reduced (4.1.4 (a)) | 1 |
Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
Front Position lamp missing (4.2.1 (a)) | 1 |
Rear Brake indicates excessive fluctuation of brake effort (1.2.1 (e)) | 1 |
Nearside Brake pedal anti-slip provision worn smooth gear lever rubber missing (1.1.2 (c)) | 1 |
Rear Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
Steering headbearing has excessive wear or free play (2.2.2 (f) (i)) | 1 |