Most common failures | No# failures |
---|
Headlamp aim out of alignment | 10 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 7 |
Throttle operating incorrectly |6.2.1f| | 7 |
Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 6 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 5 |
Drive chain sprocket carrier worn to excess |6.2.1e| | 5 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 5 |
Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 4 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 4 |
Registration plate issues | 4 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 3 |
Front wheel bearings have excessive free play |2.3.5b| | 3 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 3 |
Horn not working |1.7.3a| | 3 |
Steering headbearing has excessive free play |2.2.2| | 3 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 3 |
Drive chain excessively loose |6.2.1d| | 3 |
Front Front wheel bearings are excessively rough |2.3.5b| | 3 |
Rear wheel spindle securing nut locking device missing |2.4.A.2b| | 3 |
Rear reflector on motorcycle missing |1.4.1| | 2 |
Wheel alignment incorrect which adversely affects the handling |2.5.1| | 2 |
Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Front wheel bearings are excessively rough |2.3.5b| | 2 |
Drive chain excessively tight |6.2.1d| | 2 |
Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 2 |
Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Front Floor brake test indicates a binding brake |3.3.C2c| | 2 |
Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 2 |
Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 2 |
Front Front wheel bearings have excessive free play |2.3.5b| | 2 |
Front All position lamps not working |4.2.1 |a|| | 1 |
Offside Front Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
Nearside Front Fuel system component leaking |7.2.1a| | 1 |
Centre Rear reflector on motorcycle missing |1.4.1| | 1 |
Direction indicators not working |1.5.1c| | 1 |
Offside Rear Rear wheel spindle securing nut locking device insecure |2.4.A.2b| | 1 |
Front Throttle operating incorrectly |6.2.1f| | 1 |
Front Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Steering control has Insufficient clearance at full lock affecting the riders grasp of handlebars |2.1.2b| | 1 |
Front Wheel bearing has excessive play |5.1.3 |a| |i|| | 1 |
Front Wheel bearing rough when rotated |5.1.3 |b| |i|| | 1 |
Nearside Front Brake disc|s| excessively pitted |3.2.A1l| | 1 |
Offside Front Brake disc|s| excessively pitted |3.2.A1l| | 1 |
Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
Nearside Steering lock stop ineffective |2.1.3| | 1 |
Front suspension assembly component loose |2.3.1| | 1 |
Front suspension assembly component excessively misaligned |2.3.1| | 1 |
Front suspension assembly component cracked |2.3.1| | 1 |
Offside Front Motorcycle structure excessively damaged cowling loose |6.1.1a| | 1 |
Rear Drive chain excessively loose |6.2.1d| | 1 |
Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
Front Steering headbearing has excessive free play |2.2.2| | 1 |
Handlebar mounting clamp bolt loose |2.1.1a| | 1 |
Offside Front Clutch lever shortened so it cannot be readily operated. |6.2.1g| | 1 |
Nearside Front Roller brake test indicates brake effort rise disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
Dipswitch does not deflect the main beam/s, making them into dipped beam/s |1.2.2b|ii|| | 1 |
Drive chain fouling another component |6.2.1d| | 1 |
Direction indicator insecure |1.5.3b| | 1 |
Rear suspension movement is excessively stiff |2.4.A.3b| | 1 |
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 1 |
Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Nearside Rear Position lamp not working |4.2.1 |a|| | 1 |
Nearside Front Direction indicator damaged and function impaired |1.5.3a| | 1 |
Offside Front Direction indicator damaged and function impaired |1.5.3a| | 1 |
Rear Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
Rear Brake pedal cannot be applied smoothly |3.1.3d| | 1 |
Offside Rear Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Fuel hose leaking |7.2.1a| | 1 |
Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
Front Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 1 |
Fuel cap leaking |6.1.3 |b| |i|| | 1 |
Rear Stop lamp not working |4.3.1 |a| |ii|| | 1 |
Rear reflector missing |4.8.2 |a| |ii|| | 1 |
Offside Front Handlebar mounting clamp bolt loose |2.1.1a| | 1 |
Offside Front Steering control has Insufficient clearance at full lock affecting the riders grasp of handlebars |2.1.2b| | 1 |
Centre Rear Rear mono-shock insecure |2.4.B.4| | 1 |
Rear Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 1 |
Offside Steering control has Insufficient clearance at full lock affecting the riders grasp of handlebars |2.1.2b| | 1 |
Rear Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
Rear Rear reflector on motorcycle missing |1.4.1| | 1 |
Offside Front Floor brake test indicates a binding brake |3.3.C2c| | 1 |
Nearside Footrest insecure |6.2.1a| | 1 |
Steering movement excessively stiff with the weight on the lower bearing |2.2.1a| | 1 |
Steering movement excessively stiff with the wheel raised |2.2.1b| | 1 |
Plate brake test indicates a binding brake |3.3.B1a| | 1 |
Front Wheel bearing so rough it is likely to overheat or break up |5.1.3 |b| |ii|| | 1 |
Front Roller brake test indicates a severely juddering brake |3.3.A1b| | 1 |
Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Nearside Front Direction indicator insecure |1.5.3b| | 1 |
Offside Front Direction indicator insecure |1.5.3b| | 1 |
Rear Roller brake test indicates a binding brake |3.3.A1a| | 1 |
Rear Brake pedal cannot be released smoothly |3.1.3d| | 1 |
Rear Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
Front Horn not working |1.7.3a| | 1 |
Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Drive chain worn to excess |6.2.1e| | 1 |
Fuel system component leaking |7.2.1a| | 1 |
Front Roller brake test indicates a sticking brake |3.3.A1a| | 1 |
Front Brake lever has inadequate reserve travel |3.1.3b| | 1 |
Throttle operating incorrectly (6.2.7 (a) (i)) | 1 |
Steering headbearing excessively stiff or notchy (2.2.2 (f) (i)) | 1 |
Nearside Front Brake disc fractured (1.1.14 (a) (ii)) | 1 |
Offside Front Brake disc fractured (1.1.14 (a) (ii)) | 1 |
Rear Wheel bearing has excessive play (5.1.3 (a) (i)) | 1 |
Front Brake indicates excessive fluctuation of brake effort (1.2.1 (e)) | 1 |
Front Fuel cap ineffective (6.1.3 (b) (i)) | 1 |
Rear Drive chain excessively loose (6.1.7 (c) (i)) | 1 |
Central Front Steering operation fouling on the fuel tank or bodywork on full lock (2.1.4 (b)) | 1 |
Central Front Steering operation restricted in free movement from lock to lock wiring fouling steering (2.1.4 (c)) | 1 |
Offside Front Brake lever has insufficient reserve travel (1.1.2 (a)) | 1 |
Nearside Rear Direction indicator not working (4.4.1 (a) (ii)) | 1 |
Horn not working (7.7 (a)) | 1 |
Rear Rear reflector missing (4.8.2 (a) (ii)) | 1 |
Exhaust has a major leak of exhaust gases offside header flange (6.1.2 (a)) | 1 |
Registration plate lamp issues | 1 |