Most common failures | No# failures |
---|
Headlamp aim out of alignment | 14 |
Drive chain excessively loose |6.2.1d| | 9 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 7 |
Horn not working |1.7.3a| | 6 |
Front Floor brake test indicates a binding brake |3.3.C2c| | 5 |
Exhaust is leaking and excessively noisey |7.1.1b| | 5 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 5 |
Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 5 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 5 |
Rear reflector on motorcycle missing |1.4.1| | 5 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 4 |
Rear suspension bush has excessive free play |2.4.A2a|i|| | 4 |
Wheel alignment incorrect which adversely affects the handling |2.5.1| | 4 |
Drive chain worn to excess |6.2.1e| | 4 |
Rear Roller brake test indicates a binding brake |3.3.A1a| | 4 |
Offside Handlebar mounting clamp bolt loose |2.1.1a| | 3 |
Offside Front Footrest insecure |6.2.1a| | 3 |
Registration plate issues | 3 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 3 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 3 |
Throttle operating incorrectly |6.2.1f| | 3 |
Registration plate lamp issues | 3 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 3 |
Drive chain sprocket carrier worn to excess |6.2.1e| | 3 |
Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 3 |
Rear Drive chain sprocket worn to excess |6.2.1e| | 3 |
Steering headbearing has excessive free play |2.2.2| | 3 |
Steering movement excessively stiff with the weight on the lower bearing |2.2.1a| | 2 |
Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 2 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 2 |
Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 2 |
Front Roller brake test indicates a sticking brake |3.3.A1a| | 2 |
Front Front wheel bearings have excessive free play |2.3.5b| | 2 |
Rear wheel spindle securing nut locking device missing |2.4.A.2b| | 2 |
Front Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Parking brake: efficiency below requirements |3.7.B.7| | 2 |
Rear parking brake recording little or no effort | 2 |
Nearside Front Direction indicator insecure |1.5.3b| | 2 |
Rear Rear suspension movement is excessively stiff |2.4.A.3b| | 2 |
Offside Rear Direction indicator not working |1.5.1c| | 2 |
Offside Handlebar handgrip not secure to handlebars. |2.1.1c| | 2 |
Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 2 |
Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 2 |
Rear Brake pedal has inadequate reserve travel |3.1.3b| | 2 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 2 |
Front Brake component has restricted free movement and operation is likely to be impeded |3.2.A1h| | 2 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 2 |
Rear Rear suspension bush has excessive free play |2.4.A2a|i|| | 2 |
Front wheel bearings are excessively rough |2.3.5b| | 2 |
Rear Drive chain excessively loose |6.2.1d| | 2 |
Steering control has Insufficient clearance at full lock affecting the riders grasp of handlebars |2.1.2b| | 2 |
Nearside Front Footrest insecure |6.2.1a| | 2 |
Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Front Brake disc|s| has excessive run out |3.2.A1m| | 2 |
Nearside Handlebar deformed |2.1.1b| | 2 |
Front Position lamp not working (4.2.1 (a)) | 2 |
Rear Footrest missing (6.2.12 (a)) | 2 |
Rear reflector missing (4.8.2 (a) (ii)) | 2 |
Centre Front Lower Front wheel bearings have excessive free play |2.3.5b| | 1 |
Rear suspension component seized |2.4A2a|ii|| | 1 |
Rear Brake reaction bracket securing bolt|s| loose |3.2.A1j| | 1 |
Rear Rear wheel has a loose wheel nut|s| |4.2.3a| | 1 |
Rear Hydraulic brake control feels spongy |3.1.4a| | 1 |
Rear Brake disc|s| has excessive run out |3.2.A1m| | 1 |
Headlamp insecure |1.2.3b| | 1 |
Front Front suspension has inadequate damping effect. |2.3.6c| | 1 |
Front Floor brake test indicates a sticking brake |3.3.C2c| | 1 |
Rear Brake lining|s| less than 1.5 mm thick |3.2.A1f|i|| | 1 |
Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 1 |
Brake lever cannot be applied smoothly |3.1.3d| | 1 |
Offside Handlebar deformed |2.1.1b| | 1 |
Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride chain link. |6.2.1h| | 1 |
Rear Brake disc|s| cracked |3.2.A1g| | 1 |
Nearside Front Front suspension assembly component loose |2.3.1| | 1 |
Front Brake hose stretched by suspension movement |3.2.B3b| | 1 |
Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
Offside Rear Direction indicators not working |1.5.1c| | 1 |
Offside Braking system leaking front to rear pipe burst |3.6.A.1| | 1 |
Front Front wheel bearing rough when rotated |2.5.A.2| | 1 |
Rear Trailing arm has excessive play in a pin/bearing |2.4.G.2| | 1 |
Offside Rear Brake lever is inoperative |9.3.1g| | 1 |
Nearside Rear Braking system leaking |3.6.A.1| | 1 |
Centre Front Braking system leaking |3.6.A.1| | 1 |
Service brake: efficiency below requirements |3.7.B.7| | 1 |
Offside Brake lever is so short and the brake cannot be readily applied |3.1.3c| | 1 |
Rear Rear wheel spindle securing nut locking device missing split pin |2.4.A.2b| | 1 |
Rear mono-shock pivot excessively worn lower shock mounting bush |2.4.B.4| | 1 |
Rear Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
Front Stop lamp does not illuminate immediately a brake applies leaver does not illuminate brake light |1.3.1a| | 1 |
Rear mono-shock pivot seized |2.4.B.4| | 1 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
Rear Roller brake test indicates brake effort rise disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 1 |
Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
Rear Rear mono-shock pivot excessively worn |2.4.B.4| | 1 |
Rear Rear wheel spindle securing nut locking device missing |2.4.A.2b| | 1 |
Rear Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Offside Front Front wheel spindle securing nut locking device missing |2.3.3a| | 1 |
Rear Rear reflector on motorcycle missing |1.4.1| | 1 |
Front Horn not working |1.7.3a| | 1 |
Rear Roller brake test indicates a sticking brake |3.3.A1a| | 1 |
Offside Front Direction indicator damaged and function impaired |1.5.3a| | 1 |
Rear Brake excessively binding |1.2.1 |f|| | 1 |
Upper Direction indicators not working |1.5.1c| | 1 |
Rear Brake component worn and seriously reduced in strength |3.2.A1| | 1 |
Front Brake component worn and seriously reduced in strength |3.2.A1| | 1 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
Front Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 1 |
Front Throttle operating incorrectly |6.2.1f| | 1 |
Rear position lamp adversely affected by the operation of another lamp brake light &rear light wired in reverse |1.1.3b| | 1 |
Nearside Front Handlebar mounting clamp bolt loose |2.1.1a| | 1 |
Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Offside Front Direction indicators not working |1.5.1c| | 1 |
Clutch lever shortened so it cannot be readily operated. |6.2.1g| | 1 |
Horn control not functioning. |1.7.2b| | 1 |
Nearside Rear Drive chain sprocket carrier worn to excess |6.2.1e| | 1 |
Front position lamp incorrect colour |1.1.2a| | 1 |
Front Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 1 |
Rear Rear suspension component seized |2.4A2a|ii|| | 1 |
Centre Front Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Front Brake disc|s| is excessively distorted |3.2.A1m| | 1 |
Rear Stop lamp deteriorated and function impaired |1.3.3a| | 1 |
Brake disc|s| excessively worn |3.2.A1l| | 1 |
Brake fluid reservoir fluid level dangerously low |3.2.B1d| | 1 |
Floor brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.C1b| | 1 |
Rear Floor brake test indicates a binding brake |3.3.C2c| | 1 |
Handlebar deformed |2.1.1b| | 1 |
Nearside Front Front suspension assembly component excessively bent |2.3.1| | 1 |
Offside Front Front suspension assembly component excessively bent |2.3.1| | 1 |
Front Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Rear Brake pedal is inoperative |3.1.3c| | 1 |
Rear Exhaust mounting missing |7.1.1c| | 1 |
Chain guard insecure |6.2.1c| | 1 |
Rear suspension movement is excessively stiff |2.4.A.3b| | 1 |
Steering control has Insufficient clearance at full lock affecting the riders operation of the controls |2.1.2b| | 1 |
Front wheel bearings have excessive free play |2.3.5b| | 1 |
Headlamp incorrect colour |1.2.1| | 1 |
Offside Front Stop lamp does not illuminate immediately a brake applies brake lever |1.3.1a| | 1 |
Rear Brake pedal pivots excessively worn |3.1.3a| | 1 |
Direction indicators flashing less than 60 times a minute |1.5.1c| | 1 |
Offside Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Fuel cap does not fasten securely maintaining the sealing arrangement |7.2.2b| | 1 |
Lower Rear mono-shock pivot excessively worn |2.4.B.4| | 1 |
Rear Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Lower Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Offside Rear Brake disc|s| is excessively distorted |3.2.A1m| | 1 |
Nearside Front Floor brake test indicates a binding brake |3.3.C2c| | 1 |
Offside Front Floor brake test indicates a binding brake |3.3.C2c| | 1 |
Fairings insecure and likely to impede the steering |2.1.2e| | 1 |
Front Front wheel bearings are excessively rough |2.3.5b| | 1 |
Rear Front wheel bearings have excessive free play |2.3.5b| | 1 |
Nearside Front Direction indicator not working |1.5.1c| | 1 |
Front Steering headbearing has excessive free play |2.2.2| | 1 |
Rear mono-shock pivot excessively worn |2.4.B.4| | 1 |
Rear suspension bearing has excessive free play |2.4.A2a|i|| | 1 |
Fuel system component insecure |7.2.1b| | 1 |
Rear Brake fluid reservoir fluid level dangerously low |3.2.B1d| | 1 |
Handlebar mounting clamp bolt loose |2.1.1a| | 1 |
Nearside Front Direction indicator damaged and function impaired |1.5.3a| | 1 |
Nearside Front Direction indicator incorrect colour |1.5.1b| | 1 |
Rear position lamp insecure |1.1.1c| | 1 |
Exhaust excessively deteriorated |7.1.1a| | 1 |
Nearside Rear Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
Nearside Rear Upper Motorcycle structure insecure and likely to affect the correct functioning of the steering or braking |6.1.1c| | 1 |
Nearside Steering control has Insufficient clearance at full lock affecting the riders grasp of handlebars |2.1.2b| | 1 |
Rear Position lamp not working (4.2.1 (a)) | 1 |
Front Brake indicates excessive fluctuation of brake effort (1.2.1 (e)) | 1 |
Headlamp not working on main beam (4.1.1 (a) (ii)) | 1 |
Front Stop lamp not working (4.3.1 (a) (ii)) | 1 |
Drive chain excessively loose (6.1.7 (c) (i)) | 1 |
Motorcycle structure joining/attachment plate or fastening insecure LOWER FARING (6.1.1 (b) (i)) | 1 |
Stop lamp(s) all not working (4.3.1 (a) (iii)) | 1 |
Offside Rear Brake hose connection leaking (1.1.12 (c)) | 1 |
Nearside Rear Direction indicator not working (4.4.1 (a) (ii)) | 1 |
Nearside Steering operation fouling on the fuel tank or bodywork on full lock (2.1.4 (b)) | 1 |
Rear Brake master cylinder insecure (1.1.10 (c)) | 1 |
Nearside Front Direction indicator not working (4.4.1 (a) (ii)) | 1 |
Offside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
Brake disc contaminated (1.1.14 (b)) | 1 |
Rear Wheel bearing has excessive play (5.1.3 (a) (i)) | 1 |
Stop lamp not working (4.3.1 (a) (ii)) | 1 |
Stop lamp does not illuminate by the operation of both brake controls front brake control (4.3.2 (a) (iii)) | 1 |