Most common failures | No# failures |
---|
Headlamp aim out of alignment | 10 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 8 |
Exhaust is leaking and excessively noisey |7.1.1b| | 7 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 7 |
Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 5 |
Drive chain excessively loose |6.2.1d| | 5 |
Throttle operating incorrectly |6.2.1f| | 4 |
Registration plate issues | 4 |
Steering headbearing has excessive free play |2.2.2| | 3 |
Exhaust excessively deteriorated |7.1.1a| | 3 |
Drive chain sprocket carrier worn to excess |6.2.1e| | 3 |
Front Steering headbearing has excessive free play |2.2.2| | 2 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 2 |
Front Front wheel bearings are excessively rough |2.3.5b| | 2 |
Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 2 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Front Floor brake test indicates a binding brake |3.3.C2c| | 2 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 2 |
Horn not working |1.7.3a| | 2 |
Drive chain worn to excess |6.2.1e| | 2 |
Rear Drive chain sprocket worn to excess |6.2.1e| | 2 |
Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 2 |
Front Exhaust is leaking and excessively noisey |7.1.1b| | 2 |
Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Centre Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Rear Brake pedal is positioned so that the brake cannot be readily applied |3.1.3c| | 1 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 1 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Nearside Front Direction indicator not working |1.5.1c| | 1 |
Nearside Rear Direction indicators affected by the operation of another lamp |1.5.1c| | 1 |
Rear Brake disc|s| cracked |3.2.A1g| | 1 |
Centre Rear Upper Rear suspension bearing has excessive free play |2.4.A2a|i|| | 1 |
Centre Rear Lower Rear suspension bearing has excessive free play |2.4.A2a|i|| | 1 |
Outer Rear Upper Rear suspension bearing has excessive free play |2.4.A2a|i|| | 1 |
Offside Front Direction indicator not working |1.5.1c| | 1 |
Rear wheel spindle securing nut locking device missing |2.4.A.2b| | 1 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Motorcycle structure excessively damaged |6.1.1a| | 1 |
Motorcycle structure insecure and likely to affect the correct functioning of the steering or braking |6.1.1c| | 1 |
Exhaust has part of the system missing |7.1.1a| | 1 |
Offside Steering control has Insufficient clearance at full lock affecting the riders grasp of handlebars |2.1.2b| | 1 |
Front Floor brake test indicates a sticking brake |3.3.C2c| | 1 |
Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 1 |
Outer Rear Upper All position lamps adversely affected by the operation of another lamp |1.1.3b| | 1 |
Inner Lower Brake disc|s| has excessive run out |3.2.A1m| | 1 |
Rear suspension component seized |2.4A2a|ii|| | 1 |
Roller brake test indicates brake effort rise disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
Nearside Rear Drive chain sprocket carrier worn to excess |6.2.1e| | 1 |
Nearside Rear Drive chain excessively loose |6.2.1d| | 1 |
Offside Rear Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Front Front suspension has inadequate damping effect. |2.3.6c| | 1 |
Front Brake lever has inadequate reserve travel |3.1.3b| | 1 |
Nearside Handlebar mounting clamp bolt loose |2.1.1a| | 1 |
Front wheel bearings have excessive free play |2.3.5b| | 1 |
Rear Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 1 |
Front Steering lock stop maladjusted |2.1.3| | 1 |
Front Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 1 |
Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
Front Footrest insecure |6.2.1a| | 1 |
Front Direction indicators not working |1.5.1c| | 1 |
Steering control handlebar movement restricted by trapped cables |2.1.2c| | 1 |
Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
Rear shock absorber insecurely mounted |2.4.A.3b| | 1 |
Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
Offside Front Handlebar mounting clamp bolt loose |2.1.1a| | 1 |
Front Headlamp aim beam image kick-up is to the offside |1.6.1| | 1 |
Front Headlamp aim not tested |1.6| | 1 |
Headlamp aim so that beam "kick up" is not visible on the screen |4.1.2 |a|| | 1 |
Rear Brake pedal has insufficient reserve travel |1.1.2 |a|| | 1 |
Roller brake test The less effective brake control does not achieve an efficiency of 25% |1.2.2 |a| |i|| | 1 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Brake component leaking fluid |3.2.B4| | 1 |
Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Nearside Front Direction indicators not working |1.5.1c| | 1 |
Rear Rear reflector on motorcycle obscured |1.4.2b| | 1 |
Front Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 1 |
Roller brake test No brake control achieves an efficiency of 30%. |3.3.A2a| | 1 |
Roller brake test Neither brake control achieves an efficiency of 25% |3.3.A2b| | 1 |
Rear mono-shock pivot seized |2.4.B.4| | 1 |
Offside Handlebar mounting clamp bolt loose |2.1.1a| | 1 |
Rear Brake lever is bent and the brake cannot be readily applied |3.1.3c| | 1 |
Nearside Rear Direction indicator not working |1.5.1c| | 1 |
Handlebar deformed |2.1.1b| | 1 |
Steering movement excessively stiff with the wheel raised |2.2.1b| | 1 |
Clutch lever shortened so it cannot be readily operated. |6.2.1g| | 1 |
Front position lamp insecure |1.1.1c| | 1 |
Rear reflector missing New reflector fitted (4.8.2 (a) (ii)) | 1 |
Front Shock absorber has a serious fluid leak BOTH (5.3.2 (b)) | 1 |
Front Brake excessively binding (1.2.1 (f)) | 1 |