| Most common failures | No# failures |
|---|
| Registration plate issues | 6 |
| Steering headbearing has excessive free play |2.2.2| | 5 |
| Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 4 |
| Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 3 |
| Headlamp aim out of alignment | 3 |
| Registration plate lamp issues | 3 |
| Offside Rear Direction indicator not working |1.5.1c| | 2 |
| Front Brake caliper|s| securing bolt|s| loose |3.2.A1j| | 2 |
| Rear wheel bearings have excessive free play |2.4.A.2c| | 2 |
| Exhaust is leaking and excessively noisey |7.1.1b| | 2 |
| Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 2 |
| Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
| Front Steering headbearing has excessive free play |2.2.2| | 2 |
| Front Roller brake test indicates a binding brake |3.3.A1a| | 2 |
| Direction indicators not working |1.5.1c| | 2 |
| Front Brake disc|s| excessively worn |3.2.A1l| | 2 |
| Throttle operating incorrectly |6.2.1f| | 2 |
| Drive chain worn to excess |6.2.1e| | 2 |
| Rear mono-shock pivot excessively worn |2.4.B.4| | 2 |
| Rear Rear reflector on motorcycle missing |1.4.1| | 1 |
| Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
| Rear Roller brake test indicates a severely juddering brake |3.3.A1b| | 1 |
| Nearside Handlebar mounting clamp bolt loose |2.1.1a| | 1 |
| Direction indicators flashing more than 120 times per minute |1.5.1c| | 1 |
| Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
| Brake rod excessively damaged |3.2.A1c| | 1 |
| Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 1 |
| Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
| Front Direction indicators not working |1.5.1c| | 1 |
| Rear Direction indicators not working |1.5.1c| | 1 |
| Offside Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
| Nearside Front Direction indicator damaged and function impaired |1.5.3a| | 1 |
| Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
| Rear Roller brake test indicates a binding brake |3.3.A1a| | 1 |
| Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
| Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
| Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
| Nearside Rear Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
| Offside Rear Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
| Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
| Handlebar mounting clamp loose |2.1.1a| | 1 |
| Brake pedal has inadequate reserve travel |3.1.3b| | 1 |
| Front Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 1 |
| Rear Rear suspension component seized |2.4A2a|ii|| | 1 |
| Offside Front Lower Front wheel spindle securing nut|s| loose |2.3.5a| | 1 |
| Centre Rear Lower Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
| Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
| Centre Rear Rear reflector on motorcycle missing |1.4.1| | 1 |
| Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
| Brake lever cannot be applied smoothly |3.1.3d| | 1 |
| Rear wheel spindle securing nut locking device insecure |2.4.A.2b| | 1 |
| Front wheel spindle securing nut|s| loose |2.3.3a| | 1 |
| Nearside Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
| Rear Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
| Nearside Front Brake pipe inadequately supported |3.2.B2b| | 1 |
| Centre Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
| Offside Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
| Front Front position lamp incorrect colour |1.1.2a| | 1 |
| Floor brake test No brake control achieves an efficiency of 30%. |3.3.C1a| | 1 |
| Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
| Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
| Front Headlamp aim beam image kick up to the offside tape up |1.6| | 1 |
| Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
| Headlamp aim beam image kick up to the offside |1.6| | 1 |
| Floor brake test Neither brake control achieves an efficiency of 25% |3.3.C1b| | 1 |
| Front Roller brake test indicates a severely grabbing brake |3.3.A1b| | 1 |
| Horn not working |1.7.3a| | 1 |
| Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
| Centre Rear Upper Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
| Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
| Rear Drive chain excessively tight |6.2.1d| | 1 |
| Front Position lamp not working |4.2.1 |a|| | 1 |
| Rear Position lamp not working |4.2.1 |a|| | 1 |
| Front Brake master cylinder fluid level dangerously low |3.2.B1d| | 1 |
| Front Wheel bearing play so excessive that directional control is impaired |5.1.3 |a| |ii|| | 1 |
| Clutch lever shortened so it cannot be readily operated. |6.2.1g| | 1 |
| Nearside Handlebar deformed |2.1.1b| | 1 |
| Rear Stop lamp not working (4.3.1 (a) (ii)) | 1 |
| Rear Position lamp not working (4.2.1 (a)) | 1 |
| Rear Brake caliper inadequately mounted and braking performance affected (1.1.16 (c) (ii)) | 1 |
| Rear Brake caliper insecure (1.1.16 (c) (i)) | 1 |
| Steering headbearing has excessive wear or free play (2.2.2 (f) (i)) | 1 |