| Most common failures | No# failures |
|---|
| Headlamp aim out of alignment | 40 |
| Front Roller brake test indicates a binding brake |3.3.A1a| | 39 |
| Rear Roller brake test indicates a binding brake |3.3.A1a| | 29 |
| Registration plate issues | 23 |
| Rear reflector on motorcycle missing |1.4.1| | 21 |
| Horn not working |1.7.3a| | 14 |
| Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 11 |
| Front position lamp does not illuminate immediately when switched on |1.1.3a| | 11 |
| Offside Front shock absorber seal failed and leaking oil |2.3.3| | 11 |
| Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 11 |
| Exhaust is leaking and excessively noisey |7.1.1b| | 10 |
| Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 9 |
| Rear wheel bearings have excessive free play |2.4.A.2c| | 9 |
| Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 8 |
| Drive chain excessively loose |6.2.1d| | 7 |
| Offside Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 7 |
| Front shock absorber seal failed and leaking oil |2.3.3| | 7 |
| Drive chain sprocket carrier worn to excess |6.2.1e| | 7 |
| Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 7 |
| Throttle operating incorrectly |6.2.1f| | 7 |
| Front Floor brake test indicates a sticking brake |3.3.C2c| | 6 |
| Front wheel bearings have excessive free play |2.3.5b| | 6 |
| Rear Floor brake test indicates a binding brake |3.3.C2c| | 6 |
| Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 6 |
| Front wheel bearings are excessively rough |2.3.5b| | 6 |
| Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 6 |
| Fuel system component leaking |7.2.1a| | 6 |
| Front Floor brake test indicates a binding brake |3.3.C2c| | 6 |
| Front Hydraulic brake control feels spongy |3.1.4a| | 6 |
| Horn not loud enough to be heard by another road user |1.7.3a| | 5 |
| Front Brake lever has inadequate reserve travel |3.1.3b| | 5 |
| Rear wheel spindle securing nut locking device missing |2.4.A.2b| | 5 |
| Rear Rear wheel bearings have excessive free play |2.4.A.2c| | 4 |
| Drive chain worn to excess |6.2.1e| | 4 |
| Front Roller brake test indicates a sticking brake |3.3.A1a| | 4 |
| Chain guard insecure |6.2.1c| | 4 |
| Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 4 |
| Front Steering headbearing has excessive free play |2.2.2| | 4 |
| Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 4 |
| Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 4 |
| Rear Floor brake test indicates a sticking brake |3.3.C2c| | 3 |
| Rear Wheel alignment incorrect which adversely affects the handling |2.5.1| | 3 |
| Wheel alignment incorrect which adversely affects the handling |2.5.1| | 3 |
| Brake hose damaged | 3 |
| Front Brake fluid reservoir fluid level dangerously low |3.2.B1d| | 3 |
| Drive chain excessively tight |6.2.1d| | 3 |
| Rear suspension movement is excessively stiff |2.4.A.3b| | 3 |
| Rear Brake excessively binding (1.2.1 (f)) | 3 |
| Front Brake excessively binding (1.2.1 (f)) | 3 |
| Hydraulic brake control feels spongy |3.1.4a| | 2 |
| Rear Hydraulic brake control feels spongy |3.1.4a| | 2 |
| Headlamp dipped beam affected by the operation of another lamp |1.2.2c| | 2 |
| Steering control has Insufficient clearance at full lock affecting the riders grasp of handlebars |2.1.2b| | 2 |
| Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 2 |
| Rear Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 2 |
| Rear Roller brake test indicates a sticking brake |3.3.A1a| | 2 |
| Rear Brake component has an inadequate repair |3.1.5| | 2 |
| Rear Brake pedal has inadequate reserve travel |3.1.3b| | 2 |
| Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 2 |
| Centre Rear Rear reflector on motorcycle missing |1.4.1| | 2 |
| Offside Front Direction indicator insecure |1.5.3b| | 2 |
| Offside Front Footrest insecure |6.2.1a| | 2 |
| Rear Rear reflector on motorcycle missing |1.4.1| | 2 |
| Stop lamp not working |4.3.1 |a| |ii|| | 2 |
| Offside Handlebar handgrip not secure to handlebars. |2.1.1c| | 2 |
| Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 2 |
| Headlamp insecure |1.2.3b| | 2 |
| Rear Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 2 |
| Rear Drive chain worn to excess |6.2.1e| | 2 |
| Front Throttle operating incorrectly |6.2.1f| | 2 |
| Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 2 |
| Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 2 |
| Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 2 |
| Nearside Steering lock stop ineffective |2.1.3| | 2 |
| Offside Rear Roller brake test indicates a sticking brake |3.3.A1a| | 2 |
| An item not tested |Manual| | 2 |
| Rear suspension bearing has excessive free play |2.4.A2a|i|| | 2 |
| Direction indicators flashing less than 60 times a minute |1.5.1c| | 2 |
| Offside Front Lower Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
| Centre Lower Exhaust is leaking and excessively noisey |7.1.1b| | 2 |
| Front Position lamp not working |4.2.1 |a|| | 2 |
| Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 2 |
| Offside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 2 |
| Rear Position lamp not working (4.2.1 (a)) | 2 |
| Steering headbearing has excessive wear or free play (2.2.2 (f) (i)) | 2 |
| Registration plate lamp issues | 2 |
| Offside Rear Direction indicators flashing less than 60 times a minute |1.5.1c| | 1 |
| Nearside Front Steering control has Insufficient clearance at full lock affecting the riders grasp of handlebars |2.1.2b| | 1 |
| Steering control fouling between components which interferes with the free movement of the steering |2.1.2a| | 1 |
| Inner Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
| Front suspension has excessive stiffness in the suspension movement. |2.3.6b| | 1 |
| Rear wheel spindle loose |2.4.A.2b| | 1 |
| Stop lamp not working not working on front brake lever |4.3.1 |a| |ii|| | 1 |
| All position lamps not working front and rear |4.2.1 |a|| | 1 |
| Rear position lamp damaged and function impaired |1.1.1b| | 1 |
| Centre Rear Upper Drive chain sprocket worn to excess |6.2.1e| | 1 |
| All position lamps not working |4.2.1 |a|| | 1 |
| Front Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
| Nearside Front Brake pipe excessively chafed |3.2.B2a| | 1 |
| Nearside Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
| Offside Front Handlebar deformed |2.1.1b| | 1 |
| Offside Rear Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
| Nearside Front Steering lock stop ineffective |2.1.3| | 1 |
| Wheel alignment incorrect which adversely affects the steering |2.5.1| | 1 |
| Nearside Front Floor brake test indicates a binding brake |3.3.C2c| | 1 |
| Offside Front Floor brake test indicates a binding brake |3.3.C2c| | 1 |
| Nearside Rear Direction indicator not working |1.5.1c| | 1 |
| Offside Rear Direction indicator not working |1.5.1c| | 1 |
| Roller brake test indicates brake effort rise disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
| Footrest insecure |6.2.1a| | 1 |
| Offside Front Direction indicator not working |1.5.1c| | 1 |
| Centre Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
| Offside Front Direction indicators not working |1.5.1c| | 1 |
| Front Brake caliper|s| securing bolt|s| loose |3.2.A1j| | 1 |
| Headlamp switch faulty |1.2.4| | 1 |
| Stop lamp does not emit a steady light |1.3.1b| | 1 |
| Rear Brake disc|s| excessively scored |3.2.A1l| | 1 |
| Rear Brake caliper|s| securing bolt|s| loose |3.2.A1j| | 1 |
| Throttle operating incorrectly Throttle sticks on |6.2.7 |a| |i|| | 1 |
| Stop lamp not working front brake |4.3.1 |a| |ii|| | 1 |
| Rear Rear reflector missing |4.8.2 |a| |ii|| | 1 |
| Offside Rear Drive chain excessively loose |6.2.1d| | 1 |
| Horn not working |7.7 |a| |ii|| | 1 |
| Headlamp aim headlamp deteriorated and function impaired |1.2.3a| | 1 |
| Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 1 |
| Nearside Front Brake disc|s| excessively worn |3.2.A1l| | 1 |
| Offside Front Brake disc|s| excessively worn |3.2.A1l| | 1 |
| Offside Rear Rear position lamp damaged and function impaired |1.1.1b| | 1 |
| Offside Rear Stop lamp damaged and function impaired |1.3.3a| | 1 |
| Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 1 |
| Headlamp deteriorated and function impaired |1.2.3a| | 1 |
| Front Headlamp dipped beam affected by the operation of another lamp |1.2.2c| | 1 |
| Front Steering movement excessively stiff with the wheel raised |2.2.1b| | 1 |
| Rear Drive chain excessively tight |6.2.1d| | 1 |
| Nearside Front Brake pipe union leaking fluid |3.2.B4| | 1 |
| Nearside Front Direction indicator not working |1.5.1c| | 1 |
| Nearside Front Lower Brake pipe excessively damaged |3.2.B2a| | 1 |
| Front All position lamps do not illuminate immediately when switched on |1.1.3a| | 1 |
| Offside Steering lock stop maladjusted |2.1.3| | 1 |
| Offside Steering control has Insufficient clearance at full lock affecting the riders grasp of handlebars |2.1.2b| | 1 |
| Nearside Front Footrest insecure |6.2.1a| | 1 |
| Fuel system component leaking under carbs |7.2.1a| | 1 |
| Front Front wheel bearings are excessively rough |2.3.5b| | 1 |
| Offside Rear Lower Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
| Drive chain excessively tight |6.1.7 |k| |i|| | 1 |
| Front Fuel system component leaking |7.2.1a| | 1 |
| Offside Rear Brake caliper|s| securing bolt|s| loose |3.2.A1j| | 1 |
| Offside Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
| Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
| All position lamps do not illuminate immediately when switched on |1.1.3a| | 1 |
| Headlamp not working on dipped beam |4.1.1 |a| |ii|| | 1 |
| Brake pedal cannot be released smoothly |3.1.3d| | 1 |
| Front Steering control has Insufficient clearance at full lock affecting the riders grasp of handlebars |2.1.2b| | 1 |
| Front Headlamp aim beam image kick up to the offside |1.6| | 1 |
| Headlamp main beam affected by the operation of another lamp |1.2.2c| | 1 |
| Drive chain fouling another component |6.2.1d| | 1 |
| Nearside Front Brake cylinder leaking hydraulic fluid |3.2.B1e| | 1 |
| Rear Rear suspension fouling which affects the movement of the rear suspension |2.4.A.3a| | 1 |
| Offside Front Direction indicator affected by the operation of another lamp |1.5.1c| | 1 |
| Front suspension has inadequate damping effect. |2.3.6c| | 1 |
| Steering lock stop ineffective |2.1.3| | 1 |
| Steering control handlebar movement restricted by trapped cables |2.1.2c| | 1 |
| Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
| Rear Rear mono-shock pivot excessively worn |2.4.B.4| | 1 |
| Direction indicators affected by the operation of another lamp |1.5.1c| | 1 |
| Rear Brake disc|s| has excessive run out |3.2.A1m| | 1 |
| Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
| Offside Front Brake component leaking fluid |3.2.B4| | 1 |
| Steering headbearing has excessive free play |2.2.2| | 1 |
| Nearside Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
| Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
| Offside Direction indicator not working |1.5.1c| | 1 |
| Rear shock absorber insecurely mounted |2.4.A.3b| | 1 |
| Rear Roller brake test indicates brake effort rise disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
| Wheel spindle or securing nut|s| so insecure that wheel security or steering control is adversely affected locking device missing |5.2.1 |c| |ii|| | 1 |
| Rear Brake excessively binding |1.2.1 |f|| | 1 |
| Brake linkage has abnormal movement due to maladjustment |3.2.A1i| | 1 |
| Nearside Front wheel bearings have excessive free play |2.3.5b| | 1 |
| Offside Front wheel bearings have excessive free play |2.3.5b| | 1 |
| Rear Brake cylinder severely corroded |3.2.B1b| | 1 |
| Rear Rear mono-shock pivot seized |2.4.B.4| | 1 |
| Rear Drive chain excessively loose |6.2.1d| | 1 |
| Centre Rear Roller brake test indicates a binding brake |3.3.A1a| | 1 |
| Front Direction indicators not working |1.5.1c| | 1 |
| Rear Direction indicators not working |1.5.1c| | 1 |
| Rear wheel insecure |4.2.3b| | 1 |
| Front mudguard insecure |2.3.7| | 1 |
| Motorcycle structure insecure and likely to affect the correct functioning of the steering or braking |6.1.1c| | 1 |
| Rear position lamp insecure |1.1.1c| | 1 |
| Direction indicator insecure |1.5.3b| | 1 |
| Front Stop lamp remains on when the brake is released |1.3.1e| | 1 |
| Offside Rear Brake cylinder leaking hydraulic fluid |3.2.B1e| | 1 |
| Front An item not tested |Manual| | 1 |
| Front wheel bearings are excessively tight |2.3.5b| | 1 |
| Centre Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
| Offside Lower Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
| Offside Front Brake component has restricted free movement and operation is likely to be impeded |3.2.A1h| | 1 |
| Nearside Front Brake component has restricted free movement and operation is likely to be impeded |3.2.A1h| | 1 |
| Rear Brake disc|s| excessively worn |3.2.A1l| | 1 |
| Front Roller brake test indicates brake effort fall disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
| Rear suspension component seized |2.4A2a|ii|| | 1 |
| Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
| Fairings so located that it is likely to impede the steering |2.1.2e| | 1 |
| Front Stop lamp not working |4.3.1 |a| |ii|| | 1 |
| Exhaust markings indicating not for road use or similar wording |7.1.4| | 1 |
| Handlebar deformed |2.1.1b| | 1 |
| Nearside Rear Direction indicator obscured |1.5.1a| | 1 |
| Offside Rear Direction indicator obscured |1.5.1a| | 1 |
| Fairing so located that it is likely to impede the steering |2.1.2e| | 1 |
| Headlamp incorrect colour |1.2.1| | 1 |
| Rear Rear wheel rotation likely to be impeded |6.2.1b| | 1 |
| Nearside Front Direction indicator flashing more than 120 times per minute |1.5.1c| | 1 |
| Riders seat insecure |6.2.1a| | 1 |
| Front Brake fluid reservoir insecurely mounted |3.2.B1a| | 1 |
| Headlamp aim beam image too far to the right |1.6.4| | 1 |
| Nearside Rear Footrest insecure |6.2.1a| | 1 |
| Front Headlamp insecure |1.2.3b| | 1 |
| Offside Rear Brake disc|s| excessively worn |3.2.A1l| | 1 |
| Rear Brake component has restricted free movement and operation is likely to be impeded |3.2.A1h| | 1 |
| Front Direction indicator not working |1.5.1c| | 1 |
| Rear Direction indicator not working |1.5.1c| | 1 |
| Front Brake disc contaminated |1.1.14 |b|| | 1 |
| Chain guard fouling another component |6.2.1c| | 1 |
| Brake lever has inadequate reserve travel |3.1.3b| | 1 |
| Stop lamp remains on when the brake is released |1.3.1e| | 1 |
| Brake pedal has inadequate reserve travel |3.1.3b| | 1 |
| Rear Stop lamp remains on when the brake is released |1.3.1e| | 1 |
| Front Front wheel bearings have excessive free play |2.3.5b| | 1 |
| Nearside Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
| Nearside Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
| Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 1 |
| Steering movement excessively stiff with the wheel raised |2.2.1b| | 1 |
| Rear Drive chain sprocket worn to excess |6.2.1e| | 1 |
| Rear Brake disc|s| cracked |3.2.A1g| | 1 |
| Offside Front Brake lever mounting insecure |3.1.2a| | 1 |
| Brake hose excessively deteriorated | 1 |
| Offside Front Handlebar mounting clamp bolt loose |2.1.1a| | 1 |
| Offside Front Front suspension assembly component loose |2.3.1| | 1 |
| Nearside Front Direction indicator damaged and function impaired |1.5.3a| | 1 |
| Rear Rear wheel spindle securing nut locking device missing |2.4.A.2b| | 1 |
| Rear Brake hose leaking fluid |3.2.B4| | 1 |
| Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
| Rear Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
| Position lamp not working |4.2.1 |a|| | 1 |
| Horn control defective |1.7.2a| | 1 |
| Front position lamp incorrect colour |1.1.2a| | 1 |
| Headlamp aim beam image kick up to the offside |1.6| | 1 |
| Direction indicators not working |1.5.1c| | 1 |
| Drive chain excessively loose |6.1.7 |c| |i|| | 1 |
| Offside Front Shock absorber has a serious fluid leak |5.3.2 |b|| | 1 |
| Nearside Handlebar grip insecure to handlebar |2.2.1 |d| |ii|| | 1 |
| Nearside Rear Rear suspension component loose |2.4.A.1a| | 1 |
| Nearside Front Handlebar deformed |2.1.1b| | 1 |
| Nearside Fuel system component insecure |7.2.1b| | 1 |
| Front Floor brake test indicates a severely juddering brake |3.3C2d.| | 1 |
| Front Brake disc|s| excessively worn |3.2.A1l| | 1 |
| Front Brake indicates excessive fluctuation of brake effort |1.2.1 |e|| | 1 |
| Front Front suspension has excessive stiffness in the suspension movement. |2.3.6b| | 1 |
| Rear Brake reaction bracket securing bolt|s| loose |3.2.A1j| | 1 |
| Nearside Front Brake excessively binding (1.2.1 (f)) | 1 |
| Offside Front Brake excessively binding (1.2.1 (f)) | 1 |
| Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i)) | 1 |
| Valve stem seriously misaligned (5.2.3 (j)) | 1 |
| Floor brake test No brake control achieves an efficiency of 30% (1.2.2 (a) (i)) | 1 |
| Rear Rear reflector missing (4.8.2 (a) (ii)) | 1 |
| Headlamp aim projected beam image obviously incorrect (4.1.2 (c)) | 1 |
| Fuel cap ineffective fuel cap does not close securely (6.1.3 (b) (i)) | 1 |
| Nearside Front Brake caliper leaking and braking performance affected (1.1.16 (b) (ii)) | 1 |
| Brake indicates excessive fluctuation of brake effort Front brake unable to maintain steady pressure (1.2.1 (e)) | 1 |
| Front Position lamp not working (4.2.1 (a)) | 1 |
| Rear Lower Shock absorber has an excessively worn bush (5.3.2 (c)) | 1 |
| Front Brake lever has insufficient reserve travel (1.1.2 (a)) | 1 |
| Front Steering headbearing excessively stiff or notchy BOTTOM BEARING SEIZED (2.2.2 (f) (i)) | 1 |
| Offside Front Throttle operating incorrectly NOT RETURNING CORRECTLY (6.2.7 (a) (i)) | 1 |
| Stop lamp does not illuminate by the operation of both brake controls (4.3.2 (a) (iii)) | 1 |
| Motorcycle structure modified such that structural rigidity is significantly reduced (6.1.1 (d) (i)) | 1 |
| Rear Wheel spindle loose (5.2.1 (c) (i)) | 1 |
| Rear Wheel spindle locking device missing (5.2.1 (d)) | 1 |
| Exhaust silencer insecure (8.1.1 (b) (i)) | 1 |