| Most common failures | No# failures |
|---|
| Headlamp aim out of alignment | 113 |
| Registration plate lamp issues | 88 |
| Rear reflector on motorcycle missing |1.4.1| | 64 |
| Drive chain excessively loose |6.2.1d| | 47 |
| Registration plate issues | 42 |
| Front Roller brake test indicates a binding brake |3.3.A1a| | 28 |
| Rear Roller brake test indicates a binding brake |3.3.A1a| | 28 |
| Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 27 |
| Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 26 |
| Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 25 |
| Rear reflector missing (4.8.2 (a) (ii)) | 23 |
| Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 23 |
| Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 22 |
| Drive chain worn to excess |6.2.1e| | 19 |
| Rear Brake excessively binding (1.2.1 (f)) | 18 |
| Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 17 |
| Drive chain excessively loose (6.1.7 (c) (i)) | 17 |
| Front Brake excessively binding (1.2.1 (f)) | 17 |
| Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 15 |
| Front Stop lamp not working (4.3.1 (a) (ii)) | 15 |
| Drive chain excessively tight |6.2.1d| | 15 |
| Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 15 |
| Rear wheel bearings have excessive free play |2.4.A.2c| | 13 |
| Horn not working |1.7.3a| | 13 |
| Steering headbearing excessively stiff or notchy (2.2.2 (f) (i)) | 12 |
| Rear suspension movement is excessively stiff |2.4.A.3b| | 12 |
| Exhaust is leaking and excessively noisey |7.1.1b| | 12 |
| Offside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 11 |
| Stop lamp remains on when the brakes are released | 11 |
| Horn not working (7.7 (a) (ii)) | 11 |
| Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 11 |
| Rear Drive chain sprocket worn to excess |6.2.1e| | 10 |
| Headlamp not working on dipped beam |4.1.1 |a| |ii|| | 9 |
| Front Valve stem seriously damaged (5.2.3 (j)) | 9 |
| Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 9 |
| Front Floor brake test indicates a binding brake |3.3.C2c| | 9 |
| Horn not working (7.7 (a)) | 9 |
| Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 9 |
| Rear Stop lamp remains on when the brake is released |1.3.1e| | 8 |
| Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 8 |
| Drive chain excessively tight (6.1.7 (k) (i)) | 8 |
| Rear wheel spindle securing nut locking device missing |2.4.A.2b| | 8 |
| Offside Front shock absorber seal failed and leaking oil |2.3.3| | 8 |
| Drive chain so loose it is likely to fail (6.1.7 (c) (ii)) | 7 |
| Front position lamp does not illuminate immediately when switched on |1.1.3a| | 7 |
| Rear Floor brake test indicates a binding brake |3.3.C2c| | 7 |
| Rear Stop lamp not working (4.3.1 (a) (ii)) | 7 |
| Rear Brake excessively binding |1.2.1 |f|| | 7 |
| Rear suspension bush has excessive free play |2.4.A2a|i|| | 7 |
| Rear Rear reflector on motorcycle missing |1.4.1| | 7 |
| Rear Valve stem seriously damaged (5.2.3 (j)) | 6 |
| Front Roller brake test indicates a sticking brake |3.3.A1a| | 6 |
| Rear Brake fluid reservoir fluid level dangerously low |3.2.B1d| | 6 |
| Throttle operating incorrectly |6.2.1f| | 6 |
| Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 6 |
| Rear Shock absorber has negligible damping effect (5.3.2 (b)) | 6 |
| Drive chain excessively loose |6.1.7 |c| |i|| | 5 |
| Nearside Rear Direction indicator not working |1.5.1c| | 5 |
| Stop lamp does not illuminate by the operation of both brake controls (4.3.2 (a) (iii)) | 5 |
| Offside Front Shock absorber has a serious fluid leak |5.3.2 |b|| | 5 |
| Rear Drive chain excessively loose |6.2.1d| | 5 |
| Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 5 |
| Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 5 |
| Rear Wheel bearing has excessive play (5.1.3 (a) (i)) | 5 |
| Rear Rear wheel bearings have excessive free play |2.4.A.2c| | 5 |
| Headlamp not working on main beam (4.1.1 (a) (ii)) | 5 |
| Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 5 |
| Stop lamp not working (4.3.1 (a) (ii)) | 5 |
| Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 5 |
| Headlamp aim not tested |4.1.2 |b|| | 4 |
| Drive chain so loose it is likely to fail |6.1.7 |c| |ii|| | 4 |
| Rear Brake disc|s| excessively worn |3.2.A1l| | 4 |
| Headlamp aim not tested (4.1.2 (b)) | 4 |
| Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 4 |
| Rear reflector missing |4.8.2 |a| |ii|| | 4 |
| Rear Brake indicates excessive fluctuation of brake effort (1.2.1 (e)) | 4 |
| Riders seat insecure |6.2.1a| | 4 |
| Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 4 |
| Rear Rear reflector missing (4.8.2 (a) (ii)) | 4 |
| Stop lamp remains on when the brake is released |1.3.1e| | 4 |
| Rear Brake disc|s| excessively scored |3.2.A1l| | 4 |
| Rear Drive chain worn to excess |6.2.1e| | 4 |