Most common failures | No# failures |
---|
Headlamp aim out of alignment | 97 |
Rear reflector on motorcycle missing |1.4.1| | 34 |
Drive chain excessively loose |6.2.1d| | 33 |
Registration plate lamp issues | 30 |
Registration plate issues | 22 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 18 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 18 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 15 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 15 |
Horn not working |1.7.3a| | 14 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 12 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 11 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 10 |
Drive chain worn to excess |6.2.1e| | 10 |
Throttle operating incorrectly |6.2.1f| | 9 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 9 |
Rear Drive chain sprocket worn to excess |6.2.1e| | 8 |
Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 8 |
Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 7 |
Rear wheel spindle securing nut locking device missing |2.4.A.2b| | 7 |
Handlebar deformed |2.1.1b| | 7 |
Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 7 |
Rear Roller brake test indicates a binding brake |3.3.A1a| | 7 |
Drive chain excessively tight |6.2.1d| | 6 |
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 6 |
Rear Roller brake test indicates a sticking brake |3.3.A1a| | 6 |
Front Front shock absorber seal failed and leaking oil |2.3.3| | 6 |
Drive chain sprocket carrier worn to excess |6.2.1e| | 6 |
Rear Brake indicates excessive fluctuation of brake effort (1.2.1 (e)) | 6 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 6 |
Offside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 6 |
Headlamp insecure |1.2.3b| | 5 |
Rear reflector missing (4.8.2 (a) (ii)) | 5 |
Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 5 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 5 |
Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 5 |
Front Brake lever has inadequate reserve travel |3.1.3b| | 5 |
Drive chain excessively loose (6.1.7 (c) (i)) | 4 |
Drive chain worn to excess (6.1.7 (c) (i)) | 4 |
Rear Rear reflector on motorcycle missing |1.4.1| | 4 |
Rear suspension movement is excessively stiff |2.4.A.3b| | 4 |
Front Stop lamp not working (4.3.1 (a) (ii)) | 4 |
Front Brake excessively binding (1.2.1 (f)) | 4 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 4 |
Offside Front Shock absorber has a serious fluid leak |5.3.2 |b|| | 4 |
Rear Stop lamp remains on when the brake is released |1.3.1e| | 4 |
Stop lamp not working (4.3.1 (a) (ii)) | 4 |
Rear Stop lamp not working (4.3.1 (a) (ii)) | 4 |
Steering movement excessively stiff with the weight on the lower bearing |2.2.1a| | 4 |
Front Position lamp not working (4.2.1 (a)) | 4 |
Steering headbearing has excessive free play |2.2.2| | 4 |
Rear suspension bush has excessive free play |2.4.A2a|i|| | 4 |
Exhaust is leaking and excessively noisey |7.1.1b| | 4 |
Front Horn not working |1.7.3a| | 3 |
Rear Brake excessively binding (1.2.1 (f)) | 3 |
Rear Drive chain excessively loose |6.2.1d| | 3 |
Rear reflector missing |4.8.2 |a| |ii|| | 3 |
Rear Brake pedal cannot be applied smoothly |3.1.3d| | 3 |
Exhaust has a major leak of exhaust gases (6.1.2 (a)) | 3 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 3 |
Front Handlebar deformed |2.1.1b| | 3 |
Upper Rear mono-shock pivot excessively worn |2.4.B.4| | 3 |
Offside Rear Direction indicators not working |1.5.1c| | 3 |
Nearside Front Shock absorber has a serious fluid leak |5.3.2 |b|| | 3 |
Front Brake excessively binding |1.2.1 |f|| | 3 |
Front Floor brake test indicates a binding brake |3.3.C2c| | 3 |
Front Valve stem seriously damaged (5.2.3 (j)) | 3 |
Rear Valve stem seriously damaged (5.2.3 (j)) | 3 |
Front shock absorber seal failed and leaking oil |2.3.3| | 3 |
Offside Front Direction indicators not working |1.5.1c| | 3 |
Rear Rear reflector missing (4.8.2 (a) (ii)) | 3 |
Stop lamp remains on when the brakes are released | 3 |
Horn not loud enough to be heard by another road user |1.7.3a| | 3 |
Stop lamp remains on when the brake is released |1.3.1e| | 3 |
Rear Drive chain worn to excess |6.2.1e| | 2 |
Rear Wheel alignment incorrect which adversely affects the handling |2.5.1| | 2 |
Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 2 |
Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 2 |
Horn not working (7.7 (a) (ii)) | 2 |
Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 2 |
Headlamp aim not tested |1.6| | 2 |
Front wheel bearings are excessively rough |2.3.5b| | 2 |
Front Brake lever is so short that the brake cannot be readily applied (1.1.2 (d)) | 2 |
Offside Front Direction indicator damaged and function impaired |1.5.3a| | 2 |
Wheel alignment incorrect which adversely affects the handling |2.5.1| | 2 |
Rear Exhaust system insecure (6.1.2 (a)) | 2 |
Nearside Front Direction indicator not working |1.5.1c| | 2 |
Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 2 |
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 2 |
Rear Position lamp not working (4.2.1 (a)) | 2 |
Nearside Rear Direction indicator not working |1.5.1c| | 2 |
Front Drive chain sprocket worn to excess (6.1.7 (c) (i)) | 2 |
Offside Handlebar handgrip not secure to handlebars. |2.1.1c| | 2 |
Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 2 |
Rear Rear wheel spindle securing nut locking device missing |2.4.A.2b| | 2 |
Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition |8.1.1 |a|| | 2 |
Drive chain excessively tight (6.1.7 (k) (i)) | 2 |
Front Brake disc|s| has excessive run out |3.2.A1m| | 2 |
Clutch lever positioned so it cannot be readily operated. |6.2.1g| | 2 |
Rear Plate brake test indicates a binding brake |3.3.B1a| | 2 |
Rear Floor brake test indicates a sticking brake |3.3.C2c| | 2 |
Nearside Rear Direction indicators not working |1.5.1c| | 2 |
Front Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 2 |
Horn not working |7.7 |a| |ii|| | 2 |
Drive chain excessively loose |6.1.7 |c| |i|| | 2 |
Rear Direction indicator obviously incorrectly positioned (4.4.3 (a)) | 2 |
Front Exhaust is leaking and excessively noisey |7.1.1b| | 2 |
Front Brake lever is damaged and the brake cannot be readily applied |3.1.3c| | 2 |
Rear reflector on motorcycle incorrectly positioned |1.4.2d| | 2 |
Front Shock absorber has a serious fluid leak |5.3.2 |b|| | 2 |
Rear Roller brake test indicates a severely juddering brake |3.3.A1b| | 2 |
Rear Wheel bearing has excessive play |5.1.3 |a| |i|| | 2 |
Exhaust excessively deteriorated |7.1.1a| | 2 |
Upper Rear suspension bush has excessive free play |2.4.A2a|i|| | 2 |
Front Handlebar deformed to the extent that steering is affected (2.2.1 (c) (ii)) | 2 |
Front Wheel alignment incorrect which adversely affects the handling (2.4 (a)) | 2 |
Rear Brake grabbing severely |1.2.1 |c|| | 2 |