| Most common failures | No# failures |
|---|
| Headlamp aim out of alignment | 19 |
| Front Roller brake test indicates a binding brake |3.3.A1a| | 8 |
| Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 7 |
| Front position lamp does not illuminate immediately when switched on |1.1.3a| | 6 |
| Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 5 |
| Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 5 |
| Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 4 |
| Front Floor brake test indicates a binding brake |3.3.C2c| | 4 |
| Horn not working |1.7.3a| | 4 |
| Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 4 |
| Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 4 |
| Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 3 |
| Drive chain excessively loose |6.2.1d| | 3 |
| Exhaust is leaking and excessively noisey |7.1.1b| | 3 |
| Offside Front shock absorber seal failed and leaking oil |2.3.3| | 3 |
| Handlebar deformed |2.1.1b| | 2 |
| Rear Drive chain excessively loose |6.2.1d| | 2 |
| Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
| Throttle operating incorrectly |6.2.1f| | 2 |
| Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 2 |
| Rear wheel bearings have excessive free play |2.4.A.2c| | 2 |
| Front Hydraulic brake control feels spongy |3.1.4a| | 2 |
| Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 2 |
| Rear wheel spindle securing nut locking device missing |2.4.A.2b| | 2 |
| Indicator switch insecure |1.5.4| | 1 |
| Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 1 |
| Rear Brake drum significantly and obviously worn (1.1.14 (a) (i)) | 1 |
| Nearside Rear Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 1 |
| Offside Rear Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 1 |
| Brake lever mounting cracked |3.1.2c| | 1 |
| Front Brake hose is likely to be fouled or trapped by moving parts |3.2.B2c| | 1 |
| Front wheel spindle securing nut locking device missing |2.3.5a| | 1 |
| Rear suspension fouling which affects the movement of the rear suspension |2.4.A.3a| | 1 |
| Front Brake cylinder leaking hydraulic fluid |3.2.B1e| | 1 |
| Nearside Drive chain worn to excess |6.2.1e| | 1 |
| Registration plate issues | 1 |
| Steering movement excessively stiff with the wheel raised |2.2.1b| | 1 |
| Nearside Fuel system component leaking |7.2.1a| | 1 |
| Drive chain sprocket carrier worn to excess |6.2.1e| | 1 |
| Offside Footrest insecure |6.2.1a| | 1 |
| Front Position lamp not working (4.2.1 (a)) | 1 |
| Nearside Rear Direction indicator not working (4.4.1 (a) (ii)) | 1 |
| Central Exhaust has a major leak of exhaust gases (6.1.2 (a)) | 1 |
| Nearside Front Motorcycle structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i)) | 1 |
| Suspension attachment bracket/mounting insecure swing ARM (5.3.3 (a) (i)) | 1 |
| Stop lamp remains on when the brakes are released | 1 |
| Front Stop lamp not working (4.3.1 (a) (ii)) | 1 |
| Offside Rear Lower Suspension arm corroded and seriously weakened (5.3.3 (b) (i)) | 1 |
| Steering headbearing excessively stiff or notchy |2.2.2 |f| |i|| | 1 |
| Nearside Shock absorber has a serious fluid leak |5.3.2 |b|| | 1 |
| Riders seat insecure |6.2.1a| | 1 |
| Exhaust mounting missing |7.1.1c| | 1 |
| Steering headbearing has excessive free play |2.2.2| | 1 |
| Nearside Handlebar deformed |2.1.1b| | 1 |
| Headlamp aim headlamp damaged and function impaired |1.2.3a| | 1 |
| Nearside Lower Fuel hose leaking excessively or a risk of fire (6.1.3 (b) (ii)) | 1 |
| Rear reflector missing (4.8.2 (a) (ii)) | 1 |
| Rear Direction indicator obviously incorrectly positioned Too close together (4.4.3 (a)) | 1 |
| Rear Stop lamp not working Front and rear switch? (4.3.1 (a) (ii)) | 1 |
| Rear Brake pedal not releasing correctly and functionality of brakes affected (1.1.2 (b) (ii)) | 1 |
| Roller brake test indicates a sticking brake |3.3.A1a| | 1 |
| Offside Front Direction indicator not working |1.5.1c| | 1 |
| Offside Rear Direction indicator flashing more than 120 times per minute |1.5.1c| | 1 |
| Offside Rear Footrest missing |6.2.1a| | 1 |
| Rear Roller brake test indicates a binding brake |3.3.A1a| | 1 |
| All position lamps do not illuminate immediately when switched on |1.1.3a| | 1 |
| Rear Brake pedal has inadequate reserve travel |3.1.3b| | 1 |
| Rear Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
| Offside Front Front position lamp damaged and function impaired |1.1.1b| | 1 |
| Nearside Rear Direction indicators not working |1.5.1c| | 1 |
| Offside Rear Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
| Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
| Nearside Rear Direction indicator not working |1.5.1c| | 1 |
| Headlamp insecure |1.2.3b| | 1 |
| Rear Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
| Rear Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
| Nearside Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 1 |
| Front Stop lamp switch with a delay in operation (4.3.2 (a) (ii)) | 1 |
| Rear Rear wheel spindle securing nut locking device missing |2.4.A.2b| | 1 |
| Drive chain excessively tight |6.2.1d| | 1 |
| Front wheel bearings have excessive free play |2.3.5b| | 1 |
| Front wheel spindle securing nut locking device missing |2.3.3a| | 1 |
| Front Brake disc|s| cracked |3.2.A1g| | 1 |
| Offside Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 1 |
| Rear Drive chain excessively loose (6.1.7 (c) (i)) | 1 |
| Rear Brake reaction bracket insecure |3.2.A1j| | 1 |
| Front Brake lever has inadequate reserve travel |3.1.3b| | 1 |
| Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
| Front Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 1 |
| Front Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 1 |
| Rear Brake pedal cannot be released smoothly |3.1.3d| | 1 |
| Front Steering headbearing has excessive free play |2.2.2| | 1 |
| Rear Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
| Nearside Rear Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
| Front Front wheel has a loose wheel nut|s| |4.2.3a| | 1 |
| Front Roller brake test indicates a sticking brake |3.3.A1a| | 1 |