MOT History from tests of petrol JONWAY YY125T-12s year 2005

Review the list of common JONWAY YY125T-12 failures below or to perform a specific mot history check on your JONWAY then use our popular KnowYourCar service

mot history

Pass percent:46.43%

(The average a petrol JONWAY YY125T-12 year 2005 passes without issue)

Based on:56 MOT Tests

Most common failures	No# failures
Headlamp aim out of alignment	8
Rear Brake lever has inadequate reserve travel \|3.1.3b\|	8
Steering movement excessively `notchy` with the wheel raised \|2.2.1b\|	4
Brake hose excessively deteriorated	3
Front Floor brake test indicates a binding brake \|3.3.C2c\|	3
Brake hose damaged	3
Roller brake test The less effective brake control does not achieve an efficiency of 25%. \|3.3.A2b\|	3
Rear shock absorber has inadequate damping effect. \|2.4.A.3b\|	3
Front Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	2
Nearside Rear shock absorber has inadequate damping effect. \|2.4.A.3b\|	2
Offside Rear shock absorber has inadequate damping effect. \|2.4.A.3b\|	2
Steering movement excessively stiff with the wheel raised \|2.2.1b\|	2
Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	2
Rear Roller brake test indicates a sticking brake \|3.3.A1a\|	2
Steering movement excessively `notchy` with the weight on the lower bearing \|2.2.1a\|	2
Steering headbearing has excessive free play \|2.2.2\|	2
Front Floor brake test indicates a sticking brake \|3.3.C2c\|	1
Front Brake pipe excessively chafed \|3.2.B2a\|	1
Front Brake pipe excessively damaged \|3.2.B2a\|	1
Headlamp aim beam image kick up to the offside \|1.6\|	1
Offside Rear shock absorber insecurely mounted \|2.4.A.3b\|	1
Rear suspension movement is excessively stiff \|2.4.A.3b\|	1
Nearside Rear shock absorber seal failed and leaking oil \|2.4.A.1c\|	1
Offside Rear shock absorber seal failed and leaking oil \|2.4.A.1c\|	1
Offside Front shock absorber seal failed and leaking oil \|2.3.3\|	1
Front Roller brake test indicates a binding brake \|3.3.A1a\|	1
Rear reflector on motorcycle obscured \|1.4.2b\|	1
Exhaust mounting does not fully support the exhaust system \|7.1.1.c\|	1
Front Steering movement excessively `notchy` with the weight on the lower bearing \|2.2.1a\|	1
Offside Front Brake hose fouling \|3.2.B3b\|	1
Nearside Front Brake lever insecure \|3.1.2a\|	1
Front Brake pipe inadequately supported \|3.2.B2b\|	1
Brake pipe excessively corroded	1
Front Steering headbearing has excessive free play \|2.2.2\|	1
Rear Rear shock absorber has inadequate damping effect. \|2.4.A.3b\|	1
Exhaust is leaking and excessively noisey \|7.1.1b\|	1

We get to these numbers by trawling through over 1 billion MOT test results since 2004 and crunched the numbers. We remove anything to do with Tyres, as they are model independent and group together common non-model specific issues. We are trying to get to a picture of what models have what issues.

Please note: We take the data from the DVSA. This data is raw and can contain typos and spelling mistakes that garages may have entered while recording a MOT result. Specifically miss-match on names of models and makes. We are constantly cleaning the data so bear with the odd issue.

Got suggestions? We’re improving this section all the time. If you have any suggestions, please let us know.

Most common failures	No# failures
Headlamp aim out of alignment	8
Rear Brake lever has inadequate reserve travel \|3.1.3b\|	8
Steering movement excessively `notchy` with the wheel raised \|2.2.1b\|	4
Brake hose excessively deteriorated	3
Front Floor brake test indicates a binding brake \|3.3.C2c\|	3
Brake hose damaged	3
Roller brake test The less effective brake control does not achieve an efficiency of 25%. \|3.3.A2b\|	3
Rear shock absorber has inadequate damping effect. \|2.4.A.3b\|	3
Front Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	2
Nearside Rear shock absorber has inadequate damping effect. \|2.4.A.3b\|	2
Offside Rear shock absorber has inadequate damping effect. \|2.4.A.3b\|	2
Steering movement excessively stiff with the wheel raised \|2.2.1b\|	2
Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	2
Rear Roller brake test indicates a sticking brake \|3.3.A1a\|	2
Steering movement excessively `notchy` with the weight on the lower bearing \|2.2.1a\|	2
Steering headbearing has excessive free play \|2.2.2\|	2
Front Floor brake test indicates a sticking brake \|3.3.C2c\|	1
Front Brake pipe excessively chafed \|3.2.B2a\|	1
Front Brake pipe excessively damaged \|3.2.B2a\|	1
Headlamp aim beam image kick up to the offside \|1.6\|	1
Offside Rear shock absorber insecurely mounted \|2.4.A.3b\|	1
Rear suspension movement is excessively stiff \|2.4.A.3b\|	1
Nearside Rear shock absorber seal failed and leaking oil \|2.4.A.1c\|	1
Offside Rear shock absorber seal failed and leaking oil \|2.4.A.1c\|	1
Offside Front shock absorber seal failed and leaking oil \|2.3.3\|	1
Front Roller brake test indicates a binding brake \|3.3.A1a\|	1
Rear reflector on motorcycle obscured \|1.4.2b\|	1
Exhaust mounting does not fully support the exhaust system \|7.1.1.c\|	1
Front Steering movement excessively `notchy` with the weight on the lower bearing \|2.2.1a\|	1
Offside Front Brake hose fouling \|3.2.B3b\|	1
Nearside Front Brake lever insecure \|3.1.2a\|	1
Front Brake pipe inadequately supported \|3.2.B2b\|	1
Brake pipe excessively corroded	1
Front Steering headbearing has excessive free play \|2.2.2\|	1
Rear Rear shock absorber has inadequate damping effect. \|2.4.A.3b\|	1
Exhaust is leaking and excessively noisey \|7.1.1b\|	1

MOT History from tests of petrol JONWAY YY125T-12s year 2005

Find us on Facebook