| Most common failures | No# failures |
|---|
| Brake pipe excessively corroded | 1384 |
| Headlamp aim out of alignment | 1238 |
| Registration plate lamp issues | 762 |
| Anti-lock braking system warning lamp indicates an ABS fault | 728 |
| Windscreen wiper does not clear the windscreen effectively | 700 |
| Parking brake: efficiency below requirements |3.7.B.7| | 575 |
| Registration plate issues | 574 |
| Exhaust emissions Lambda reading after 2nd fast idle outside specified limits |7.3.D.3| | 390 |
| Exhaust emissions carbon monoxide content after 2nd fast idle excessive |7.3.D.3| | 302 |
| Rear parking brake recording little or no effort | 250 |
| Exhaust emissions carbon monoxide content at idle excessive |7.3.D.4| | 232 |
| Brake hose excessively deteriorated | 230 |
| Offside Front Lower Shock absorber has an excessively worn bush |2.7.4| | 187 |
| Brakes imbalanced across an axle | 187 |
| Nearside Front Lower Shock absorber has an excessively worn bush |2.7.4| | 158 |
| Offside Rear Direction indicator incorrect colour |1.4.A.2f| | 148 |
| Nearside Front Direction indicator incorrect colour |1.4.A.2f| | 147 |
| Offside Front Direction indicator incorrect colour |1.4.A.2f| | 142 |
| Exhaust emissions hydrocarbon content after 2nd fast idle excessive |7.3.D.3| | 141 |
| Nearside Rear Direction indicator incorrect colour |1.4.A.2f| | 138 |
| Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c)) | 135 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 134 |
| Nearside Headlamp not working on dipped beam |1.7.5a| | 130 |
| Nearside Front Upper Suspension arm has excessive play in a pin/bush |2.4.G.2| | 129 |
| Nearside Front position lamp|s| not working |1.1.A.3b| | 128 |
| Offside Front wheel bearing has excessive play |2.5.A.3c| | 122 |
| Nearside Front wheel bearing has excessive play |2.5.A.3c| | 121 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 117 |
| Offside Front Upper Suspension arm has excessive play in a pin/bush |2.4.G.2| | 114 |
| Offside Stop lamp not working |1.2.1b| | 113 |
| Offside Front position lamp|s| not working |1.1.A.3b| | 113 |
| Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 110 |
| Parking brake efficiency below requirements (1.4.2 (a) (i)) | 109 |
| Rear brake binding | 107 |
| Offside Rear fog lamp not working |1.3.2b| | 102 |
| Nearside Rear Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 102 |
| Nearside Stop lamp not working |1.2.1b| | 100 |
| Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 96 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 95 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 93 |
| Offside Headlamp not working on dipped beam |1.7.5a| | 92 |
| Nearside Front Shock absorber has an excessively worn bush |2.7.4| | 90 |
| Offside Front Shock absorber has an excessively worn bush |2.7.4| | 90 |
| Nearside Front Front wheel bearing has excessive play |2.5.A.3c| | 89 |
| Nearside Front Lower Suspension arm has excessive play in a ball joint |2.4.G.2| | 89 |
| Offside Front suspension has excessive play in a lower suspension ball joint |2.5.B.1a| | 86 |
| Offside Front Front wheel bearing has excessive play |2.5.A.3c| | 85 |
| Nearside Front suspension has excessive play in a lower suspension ball joint |2.5.B.1a| | 84 |
| Offside Front Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 81 |
| Nearside Front wheel bearing rough when rotated |2.5.A.2| | 79 |
| Offside Front wheel bearing rough when rotated |2.5.A.2| | 79 |
| Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 78 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 76 |
| Offside Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 76 |
| Offside Front Lower Suspension arm ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.4.G.2| | 75 |
| Windscreen has damage | 74 |
| Offside Front Lower Suspension arm has excessive play in a ball joint |2.4.G.2| | 74 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 71 |
| Nearside Front Lower Suspension arm ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.4.G.2| | 70 |
| Nearside Front Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 69 |
| Horn not working |1.6.2a| | 69 |
| Windscreen washer not working | 68 |
| Electronic stability system warning lamp indicates a fault |3.4.1c| | 67 |
| Offside Front Upper Suspension arm rubber bush deteriorated resulting in excessive movement |2.4.G.2| | 65 |
| Rear fog lamp tell tale not working |1.3.1b| | 63 |
| Stop lamp remains on when the brakes are released | 63 |
| Hazard warning switch faulty |1.4.B.1d| | 62 |
| Nearside Front Upper Suspension arm rubber bush deteriorated resulting in excessive movement |2.4.G.2| | 58 |
| Service brake: efficiency below requirements |3.7.B.7| | 54 |
| Offside Front Direction indicators incorrect colour |1.4.A.2f| | 51 |
| Exhaust carbon monoxide content after 2nd fast idle exceeds manufacturers specified limits (8.2.1.2 (a)) | 51 |
| Nearside Front Headlamp not working on dipped beam |1.7.5a| | 50 |
| Nearside Front Direction indicators incorrect colour |1.4.A.2f| | 50 |
| Driver`s seat fore and aft adjustment mechanism not functioning as intended. |6.2.A.3| | 50 |
| Nearside Front Lower Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.4.G.2| | 49 |
| Nearside Front Front wheel bearing rough when rotated |2.5.A.2| | 49 |
| Nearside Rear Direction indicators incorrect colour |1.4.A.2f| | 49 |
| Offside Rear Stop lamp not working |1.2.1b| | 48 |
| Offside Front Front wheel bearing rough when rotated |2.5.A.2| | 48 |
| Electronic stability control warning lamp indicates a fault (7.12 (e)) | 48 |
| Offside Front Lower Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.4.G.2| | 46 |
| Exhaust Lambda reading after 2nd fast idle outside specified limits |8.2.1.2 |c|| | 46 |
| Exhaust carbon monoxide content after 2nd fast idle exceeds default limits (8.2.1.2 (b)) | 46 |
| Stop lamp not working |1.2.1b| | 45 |
| Nearside Front Position lamp not working (4.2.1 (a) (ii)) | 45 |
| Nearside Rear position lamp|s| adversely affected by the operation of another lamp |1.1.A.3f| | 44 |
| Nearside Front Suspension arm has excessive play in a pin/bush |2.4.G.2| | 44 |
| Offside Rear Direction indicators incorrect colour |1.4.A.2f| | 44 |
| Front brake application uneven | 43 |
| Offside Rear Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 42 |
| Supplementary Restraint System warning lamp indicates a fault |5.4.2| | 41 |
| Parking brake efficiency less than 50% of the required value (1.4.2 (a) (ii)) | 40 |
| Nearside Front Front position lamp|s| not working |1.1.A.3b| | 38 |
| Offside Rear wheel bearing has excessive play |2.6.2| | 38 |
| Nearside Rear wheel bearing has excessive play |2.6.2| | 38 |
| Supplementary restraint system warning lamp indicates a fault (7.1.6 (a)) | 38 |
| Offside Front Headlamp not working on dipped beam |1.7.5a| | 37 |
| Nearside Front Front suspension has excessive play in a lower suspension ball joint |2.5.B.1a| | 36 |
| Nearside front brake binding |3.7.B.1| | 36 |
| Offside Front Suspension arm ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.4.G.2| | 36 |
| Offside Front Front position lamp|s| not working |1.1.A.3b| | 35 |
| Nearside Rear Stop lamp not working |1.2.1b| | 34 |
| Parking brake efficiency below requirements |1.4.2 |a| |i|| | 34 |
| Offside Rear position lamp|s| not working |1.1.A.3b| | 34 |
| Nearside Rear position lamp|s| not working |1.1.A.3b| | 34 |
| Offside Front Suspension arm has excessive play in a ball joint |2.4.G.2| | 34 |
| Parking brake lever has no reserve travel |3.1.6b| | 33 |
| Offside Rear position lamp|s| adversely affected by the operation of another lamp |1.1.A.3f| | 32 |
| Offside Steering rack gaiter insecure |2.2.D.2d| | 32 |
| Nearside Front Suspension arm has excessive play in a ball joint |2.4.G.2| | 32 |
| Nearside Front Suspension arm ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.4.G.2| | 31 |
| Stop lamp(s) all not working (4.3.1 (a) (iii)) | 31 |
| Offside Rear Wheel nut|s| missing |4.2.A.1e| | 30 |
| Offside Front Suspension arm has excessive play in a pin/bush |2.4.G.2| | 30 |
| Direction indicators incorrect colour |1.4.A.2f| | 30 |
| Nearside Front Lower Shock absorbers has an excessively worn bush (5.3.2 (c)) | 30 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i)) | 30 |
| Nearside Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 30 |
| Nearside Front Wheel bearing has excessive play (5.1.3 (a) (i)) | 29 |
| Nearside Rear Position lamp not working (4.2.1 (a) (ii)) | 29 |
| Exhaust carbon monoxide content at idle exceeds manufacturers specified limits (8.2.1.2 (b)) | 29 |