Most common failures | No# failures |
---|
Headlamp aim out of alignment | 7 |
Registration plate lamp issues | 3 |
Windscreen wiper does not clear the windscreen effectively | 2 |
Nearside Rear Position lamp not working (4.2.1 (a) (ii)) | 2 |
Steering rack insecure |2.2.B.1a| | 1 |
Mechanical brake component has restricted free movement | 1 |
Nearside Stop lamp not working |1.2.1b| | 1 |
Offside Stop lamp not working |1.2.1b| | 1 |
Offside Front Windscreen wiper blade deteriorated |8.2.2| | 1 |
Nearside Rear Stop lamp not working |1.2.1b| | 1 |
Offside Rear Stop lamp not working |1.2.1b| | 1 |
Nearside Front Steering rack gaiter split |2.2.D.2d| | 1 |
Offside Front Track rod end ball joint has excessive play |2.2.B.1f| | 1 |
Fuel system component leaking |7.2.3| | 1 |
Rear Stop lamp not working |1.2.1b| | 1 |
Offside Front Headlamp aim beam image too far to the left |1.6.B4| | 1 |
Power steering component|s| leaking |2.3.3b| | 1 |
Offside Steering rack gaiter split |2.2.D.2d| | 1 |
Offside Rear Suspension arm locating pin locking device not properly locked |2.4.G.3b| | 1 |
Front Fuel system component leaking |7.2.3| | 1 |
Parking brake efficiency below requirements |3.7.E.1| | 1 |
Parking brake lever has no reserve travel |3.1.6b| | 1 |
Nearside Front position lamp|s| not working |1.1.A.3b| | 1 |
Nearside Rear position lamp|s| not working |1.1.A.3b| | 1 |
Nearside Headlamp aim beam image kick up to the offside |1.8| | 1 |
Offside Headlamp aim beam image kick up to the offside |1.8| | 1 |
Horn not working |1.6.2a| | 1 |
Nearside Front Front position lamp|s| not working |1.1.A.3b| | 1 |
Offside Front Headlamp missing high beam |4.1.1 |a| |ii|| | 1 |
Stop lamp|s| all not working |4.3.1 |a| |iii|| | 1 |
Direction indicator adversely affected by the operation of another lamp both rear side lights comes on as well |4.4.3 |b|| | 1 |
Nearside Front Seat belt buckle not functioning as intended |7.1.2 |d|| | 1 |
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength marked yellow |5.3.6 |a| |i|| | 1 |
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength marked yellow |5.3.6 |a| |i|| | 1 |
Offside Front Lower Front suspension ball joint dust cover insecure so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
Nearside Front Lower Front suspension ball joint dust cover missing |2.4.G.2| | 1 |
Nearside Front Upper Front suspension ball joint dust cover insecure so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Nearside Stop lamp(s) not working (4.3.1 (a) (ii)) | 1 |
Offside Stop lamp(s) not working (4.3.1 (a) (ii)) | 1 |
Stop lamp(s) all not working (4.3.1 (a) (iii)) | 1 |
Front Position lamp not working both (4.2.1 (a) (ii)) | 1 |
Steering wheel has excessive movement up and down (2.2.2 (a)) | 1 |
Nearside Rear Exhaust has a major leak of exhaust gases (6.1.2 (a)) | 1 |
Fuel pipe insecure front to rear (6.1.3 (a) (i)) | 1 |
Fluid leak harmful to the environment or a risk to other road users coolant (8.4.1 (a) (i)) | 1 |
Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting under wheel arch (6.2.2 (d) (i)) | 1 |
Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill (6.2.2 (d) (i)) | 1 |
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i)) | 1 |
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis (5.3.6 (a) (i)) | 1 |
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill/floor (5.3.6 (a) (i)) | 1 |
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i)) | 1 |
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength floor (5.3.6 (a) (i)) | 1 |
Service brake efficiency less than 50% of the required value (1.2.2 (a) (ii)) | 1 |
Parking brake efficiency less than 50% of the required value (1.4.2 (a) (ii)) | 1 |