Most common failures | No# failures |
---|
Brake pipe excessively corroded | 10 |
Registration plate lamp issues | 6 |
Parking brake: efficiency below requirements |3.7.B.7| | 5 |
Brakes imbalanced across an axle | 3 |
Rear brake binding | 3 |
Battery insecure |1.9.1| | 2 |
Service brake: efficiency below requirements |3.7.B.7| | 2 |
Nearside Rear Direction indicator incorrect colour |1.4.A.2f| | 2 |
Nearside Rear Anti-roll bar linkage has excessive play in a pin/bush |2.4.G.2| | 2 |
Offside Rear Anti-roll bar linkage has excessive play in a pin/bush |2.4.G.2| | 2 |
Front brake application uneven | 2 |
Rear brake application uneven | 2 |
Windscreen wiper does not clear the windscreen effectively | 2 |
Rear parking brake recording little or no effort | 2 |
Brake load sensing valve linkage seized |3.6.E.3| | 1 |
Nearside Rear Service brake: efficiency below requirements |3.7.B.7| | 1 |
Offside Rear Service brake: efficiency below requirements |3.7.B.7| | 1 |
Nearside Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 1 |
Brake load sensing valve linkage defective and function impaired linkage seized (1.1.17 (a)) | 1 |
Service brake effort inadequate at a wheel both rear brakes (1.2.1 (a) (i)) | 1 |
Service brake efficiency below requirements (1.2.2 (a) (i)) | 1 |
Parking brake efficiency below requirements (1.4.2 (a) (i)) | 1 |
Horn not working |1.6.2a| | 1 |
Nearside Rear Leaf spring has excessive wear in an anchor pin and/or bush |2.4.B.2| | 1 |
Offside Rear Leaf spring has excessive wear in an anchor pin and/or bush |2.4.B.2| | 1 |
Brake load sensing valve seized and ABS not fitted or inoperative |1.1.17 |c| |ii|| | 1 |
Nearside Headlamp aim projected beam image is obviously incorrect |4.1.2 |c|| | 1 |
Battery insecure and likely to fall from carrier |4.13 |a| |ii|| | 1 |
Nearside Front Shock absorbers has a serious fluid leak | 1 |
Nearside Front Upper Suspension arm pin or bush excessively worn |5.3.4 |a| |i|| | 1 |
Body mounting fixings insecure both front cab mounts excessively worn |6.2.2 |c| |i|| | 1 |
Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting both front |6.2.2 |d| |i|| | 1 |
Parking brake efficiency below requirements |1.4.2 |a| |i|| | 1 |
Nearside Headlamp not working on dipped beam |1.7.5a| | 1 |
Windscreen wiper blade insecure | 1 |
Nearside Rear Direction indicator not working |1.4.A.2c| | 1 |
Windscreen has damage | 1 |
Nearside Front Upper Front suspension has excessive movement at a wishbone pin or bush |2.5.A.1c| | 1 |
Offside front brake binding |3.7.B.1| | 1 |
Nearside Stop lamp excessively damaged so that it is not visible from a reasonable distance |1.2.1d| | 1 |
Rear Panhard rod attachment bracket/mounting corroded and its strength is seriously reduced |2.4.G.1| | 1 |
Nearside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering |6.1.A.1| | 1 |
Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Offside Front Vehicle structure has excessive corrosion which adversely affects braking or steering |6.1.A.1| | 1 |
Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Offside Stop lamp not working |1.2.1b| | 1 |
Offside Rear Direction indicator incorrect colour |1.4.A.2f| | 1 |
Nearside Rear Anti-roll bar rubber mounting deteriorated resulting in excessive movement |2.4.G.2| | 1 |
Offside Rear Anti-roll bar rubber mounting deteriorated resulting in excessive movement |2.4.G.2| | 1 |
Nearside Rear Leaf spring has excessive side play at eye |anchor| |2.4.B.4| | 1 |
Offside Rear Leaf spring has excessive side play at eye |anchor| |2.4.B.4| | 1 |
Nearside Rear Air suspension levelling valve insecure |2.4.D.4| | 1 |
Offside Rear Shock absorber has a serious fluid leak |2.7.3| | 1 |
Rear Brake load sensing valve seized |3.6.E.3| | 1 |
Offside Rear Air suspension bellows leaking |2.4.D.2| | 1 |
Brake valve insecurely mounted |3.6.A.2a| | 1 |
Nearside Stop lamp(s) not working (4.3.1 (a) (ii)) | 1 |
Horn not working |7.7 |a| |ii|| | 1 |
Nearside Body or chassis has an inadequate repair, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Offside Body or chassis has an inadequate repair, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Body or chassis has an inadequate repair, seriously affecting its strength within 30cm of the body mountings o/side front and centre and rear further corrosion |6.1.B.2| | 1 |
Nearside Body or chassis has an inadequate repair, seriously affecting its strength within 30cm of the body mountings front and centre and rear further corrosion |6.1.B.2| | 1 |
Front Exhaust has a major leak of exhaust gases |7.1.2| | 1 |
Fuel cap/sealing device does not fasten securely maintaining the sealing arrangement |7.2.4b| | 1 |
Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings rear chassis outrigger & rear inner 1/4 pannel |6.1.B.2| | 1 |
Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis outrigger & inner sill |6.1.B.2| | 1 |
Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis outrigger & inner sill front of rear wheel |6.1.B.2| | 1 |
Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings rear chassis outrigger & inner 1/4 panel |6.1.B.2| | 1 |
Exhaust has a major leak of exhaust gases centre |7.1.2| | 1 |
Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis member corroded |6.1.B.2| | 1 |
Nearside Rear Vehicle structure has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings outrigger & rear 1/4 panel|rear of wheel| |6.1.B.2| | 1 |
Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis member |6.1.B.2| | 1 |
Nearside Rear Vehicle structure has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings chassis outrigger & inner sill |front of rear wheel| |6.1.B.2| | 1 |
Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis outrigger & inner sill |6.1.B.2| | 1 |
Offside Rear Vehicle structure has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings flooring |6.1.B.2| | 1 |
Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner whel arch under wing |6.1.B.2| | 1 |
Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner wheel arch & battery area |under wing| |6.1.B.2| | 1 |