MOT History from tests of petrol ITALJET TORPEDOs year 2000

Review the list of common ITALJET TORPEDO failures below or to perform a specific mot history check on your ITALJET then use our popular KnowYourCar service

mot history

Pass percent:83.51%

(The average a petrol ITALJET TORPEDO year 2000 passes without issue)

Based on:97 MOT Tests

Most common failures	No# failures
Direction indicators not working \|1.5.1c\|	3
Headlamp at least one does not illuminate on dipped beam \|1.2.2a\|i\|\|	2
Front Headlamp at least one does not illuminate on dipped beam \|1.2.2a\|i\|\|	2
Front Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	2
Rear Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	2
Headlamp aim out of alignment	2
Rear position lamp does not illuminate immediately when it is switched on \|1.1.3a\|	2
Front suspension has excessive stiffness in the suspension movement. \|2.3.6b\|	1
Rear reflector on motorcycle missing \|1.4.1\|	1
Rear Roller brake test indicates excessive fluctuation of brake effort \|3.3.A1d\|	1
Front Front suspension assembly component excessively bent \|2.3.1\|	1
Offside Front Direction indicators not working \|1.5.1c\|	1
Rear shock absorber has inadequate damping effect. \|2.4.A.3b\|	1
Steering headbearing excessively stiff or notchy \|2.2.2 \|f\| \|i\|\|	1
Front Wheel bearing has excessive play \|5.1.3 \|a\| \|i\|\|	1
Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	1
Horn control defective \|1.7.2a\|	1
Front shock absorber seal failed and leaking oil \|2.3.3\|	1
Roller brake test The less effective brake control does not achieve an efficiency of 25%. \|3.3.A2b\|	1
Registration plate issues	1
Rear Rear position lamp does not illuminate immediately when it is switched on \|1.1.3a\|	1
Rear Wheel spindle or securing nut(s) so insecure that wheel security or steering control is adversely affected (5.2.1 (c) (ii))	1
Front Headlamp aim not tested \|1.6\|	1
Stop lamp remains on when the brake is released \|1.3.1e\|	1
Front Floor brake test indicates a binding brake \|3.3.C2c\|	1
Front wheel bearings are excessively rough \|2.3.5b\|	1
Exhaust is leaking and excessively noisey \|7.1.1b\|	1
Front Steering control handlebar movement restricted by cables caught on a projection \|2.1.2c\|	1
Horn not working \|1.7.3a\|	1

We get to these numbers by trawling through over 1 billion MOT test results since 2004 and crunched the numbers. We remove anything to do with Tyres, as they are model independent and group together common non-model specific issues. We are trying to get to a picture of what models have what issues.

Please note: We take the data from the DVSA. This data is raw and can contain typos and spelling mistakes that garages may have entered while recording a MOT result. Specifically miss-match on names of models and makes. We are constantly cleaning the data so bear with the odd issue.

Got suggestions? We’re improving this section all the time. If you have any suggestions, please let us know.

Most common failures	No# failures
Direction indicators not working \|1.5.1c\|	3
Headlamp at least one does not illuminate on dipped beam \|1.2.2a\|i\|\|	2
Front Headlamp at least one does not illuminate on dipped beam \|1.2.2a\|i\|\|	2
Front Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	2
Rear Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	2
Headlamp aim out of alignment	2
Rear position lamp does not illuminate immediately when it is switched on \|1.1.3a\|	2
Front suspension has excessive stiffness in the suspension movement. \|2.3.6b\|	1
Rear reflector on motorcycle missing \|1.4.1\|	1
Rear Roller brake test indicates excessive fluctuation of brake effort \|3.3.A1d\|	1
Front Front suspension assembly component excessively bent \|2.3.1\|	1
Offside Front Direction indicators not working \|1.5.1c\|	1
Rear shock absorber has inadequate damping effect. \|2.4.A.3b\|	1
Steering headbearing excessively stiff or notchy \|2.2.2 \|f\| \|i\|\|	1
Front Wheel bearing has excessive play \|5.1.3 \|a\| \|i\|\|	1
Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	1
Horn control defective \|1.7.2a\|	1
Front shock absorber seal failed and leaking oil \|2.3.3\|	1
Roller brake test The less effective brake control does not achieve an efficiency of 25%. \|3.3.A2b\|	1
Registration plate issues	1
Rear Rear position lamp does not illuminate immediately when it is switched on \|1.1.3a\|	1
Rear Wheel spindle or securing nut(s) so insecure that wheel security or steering control is adversely affected (5.2.1 (c) (ii))	1
Front Headlamp aim not tested \|1.6\|	1
Stop lamp remains on when the brake is released \|1.3.1e\|	1
Front Floor brake test indicates a binding brake \|3.3.C2c\|	1
Front wheel bearings are excessively rough \|2.3.5b\|	1
Exhaust is leaking and excessively noisey \|7.1.1b\|	1
Front Steering control handlebar movement restricted by cables caught on a projection \|2.1.2c\|	1
Horn not working \|1.7.3a\|	1

MOT History from tests of petrol ITALJET TORPEDOs year 2000

Find us on Facebook