Most common failures | No# failures |
---|
Rear reflector on motorcycle missing |1.4.1| | 8 |
Headlamp aim out of alignment | 6 |
Horn not working |1.7.3a| | 5 |
Steering movement excessively stiff with the weight on the lower bearing |2.2.1a| | 5 |
Registration plate issues | 4 |
Steering movement excessively stiff with the wheel raised |2.2.1b| | 3 |
Steering linkage has excessive free play |2.2.2| | 3 |
Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 3 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 3 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 2 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 2 |
Centre Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 2 |
Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 2 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 2 |
Rear Stop lamp remains on when the brake is released |1.3.1e| | 2 |
Indicator tell tale not functioning |1.5.2| | 1 |
Front Steering movement excessively stiff with the weight on the lower bearing |2.2.1a| | 1 |
Rear Rear reflector on motorcycle missing |1.4.1| | 1 |
Rear Vehicle identification number not permanently displayed |6.3.5a| | 1 |
Rear Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Front Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
Front Steering control fouling between components which interferes with the free movement of the steering |2.1.2a| | 1 |
Floor brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.C1b| | 1 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Rear Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Front Brake lever is so short and the brake cannot be readily applied |3.1.3c| | 1 |
Nearside Rear Direction indicator not working |1.5.1c| | 1 |
Direction indicator not working |1.5.1c| | 1 |
Brake lever is bent and the brake cannot be readily applied |3.1.3c| | 1 |
Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Rear Brake lining|s| less than 1.5 mm thick |3.2.A1f|i|| | 1 |
Front Front wheel bearings have excessive free play |2.3.5b| | 1 |
Lower Steering linkage has excessive free play |2.2.2| | 1 |
Motorcycle structure insecure and likely to affect the correct functioning of the steering or braking |6.1.1c| | 1 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Headlamp aim headlamp deteriorated and function impaired |1.2.3a| | 1 |
Front Headlamp incorrect colour |1.2.1| | 1 |
Nearside Rear Direction indicator incorrect colour |1.5.1b| | 1 |
Offside Rear Direction indicator incorrect colour |1.5.1b| | 1 |
Offside Rear Direction indicator not working (4.4.1 (a) (ii)) | 1 |
Front wheel bearings have excessive free play |2.3.5b| | 1 |
Stop lamp not working front and rear (4.3.1 (a) (ii)) | 1 |
Rear Roller brake test indicates a sticking brake |3.3.A1a| | 1 |
Front Wheel alignment incorrect which adversely affects the steering |2.5.1| | 1 |
Nearside Indicator tell tale not functioning |1.5.2| | 1 |
Rear Stop lamp deteriorated and function impaired |1.3.3a| | 1 |
Rear Brake lever insecure |3.1.2a| | 1 |
Direction indicators not working |1.5.1c| | 1 |
Front Steering linkage has excessive free play |2.2.2| | 1 |
Registration plate lamp issues | 1 |
Rear Floor brake test indicates a binding brake |3.3.C2c| | 1 |
Front Floor brake test indicates a binding brake |3.3.C2c| | 1 |
Headlamp insecure |1.2.3b| | 1 |
Rear reflector on motorcycle damaged and function impaired |1.4.2a| | 1 |
Centre Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Offside Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
Headlamp aim not tested |1.6| | 1 |
Handlebar mounting clamp bolt loose |2.1.1a| | 1 |
Offside Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Rear Roller brake test indicates a severely juddering brake |3.3.A1b| | 1 |
Rear Stop lamp affected by the operation of another lamp |1.3.2| | 1 |
Front Stop lamp affected by the operation of another lamp |1.3.2| | 1 |
Stop lamp affected by the operation of the horn |1.3.2| | 1 |
Offside Direction indicator not working |1.5.1c| | 1 |
Nearside Direction indicator affected by the operation of another lamp |1.5.1c| | 1 |
Headlamp dipped beam affected by the operation of another lamp |1.2.2c| | 1 |
Headlamp main beam affected by the operation of another lamp |1.2.2c| | 1 |
Headlamp dipped beam affected by the operation of the horn |1.2.2c| | 1 |
Headlamp main beam affected by the operation of the horn |1.2.2c| | 1 |
Fuel system component leaking |7.2.1a| | 1 |
Riders seat insecure |6.2.1a| | 1 |
Upper Handlebar mounting clamp bolt loose |2.1.1a| | 1 |
Offside Rear Direction indicator not working |1.5.1c| | 1 |
Nearside Rear Direction indicator missing |1.5.1a| | 1 |
Rear Brake lever is damaged and the brake cannot be readily applied |3.1.3c| | 1 |
Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |