Most common failures | No# failures |
---|
Offside Rear fog lamp not working |1.3.2b| | 5 |
Brake pipe excessively corroded | 5 |
Windscreen wiper does not clear the windscreen effectively | 4 |
Registration plate issues | 3 |
Registration plate lamp issues | 2 |
Rear fog lamp tell tale not working |1.3.1b| | 2 |
Exhaust has a major leak of exhaust gases |7.1.2| | 2 |
Nearside Rear Leaf spring fractured |2.4.B.1a| | 2 |
Brakes imbalanced across an axle | 2 |
Battery insecure |1.9.1| | 2 |
Offside Rear Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Front brake application uneven | 1 |
Offside Front brake caliper has restricted free movement |3.5.1k| | 1 |
Rear Parking brake is not capable of being maintained in operation by direct mechanical action only |3.1.2| | 1 |
Nearside Rear Leaf spring has excessive side play at eye |anchor| |2.4.B.4| | 1 |
Offside Rear Leaf spring has excessive side play at eye |anchor| |2.4.B.4| | 1 |
Offside Rear fog lamp insecure |1.3.2a| | 1 |
Centre Exhaust has a major leak of exhaust gases |7.1.2| | 1 |
Vehicle structure has excessive corrosion which adversely affects braking or steering |6.1.A.1| | 1 |
Offside Front Headlamp not in good working order adversely affecting beam image |1.2.4a| | 1 |
Offside Rear Rear fog lamp not working |1.3.2b| | 1 |
Nearside Rear Stop lamp not working |1.2.1b| | 1 |
Offside Rear Stop lamp not working |1.2.1b| | 1 |
Offside Rear Rear position lamp|s| excessively deteriorated so that it is not visible from a reasonable distance |1.1.A.3d| | 1 |
Offside Rear Leaf spring fractured |2.4.B.1a| | 1 |
Nearside Rear Exhaust has a part missing |7.1.1a| | 1 |
Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Nearside Rear Vehicle structure has an inadequate repair, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Nearside Front Body has a sharp edge caused by corrosion |6.1.C.1| | 1 |
Nearside Rear Body has a sharp edge caused by corrosion |6.1.C.1| | 1 |
Offside Rear Body has a sharp edge caused by corrosion |6.1.C.1| | 1 |
Body has a sharp edge caused by corrosion |6.1.C.1| | 1 |
Nearside Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Offside Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Offside Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Offside Front Wheel nut|s| missing |4.2.A.1e| | 1 |
Exhaust has a part missing |7.1.1a| | 1 |
Exhaust tailpipe not capable of allowing the emission probe to be inserted |7.4.B.1| | 1 |
Nearside Front Steering pivot point has excessive play |2.2.B.1g| | 1 |
Nearside Vehicle structure has excessive corrosion which adversely affects braking or steering |6.1.A.1| | 1 |
Parking brake: efficiency below requirements |3.7.B.7| | 1 |
Nearside Rear Body has a sharp edge caused by damage |6.1.C.1| | 1 |
Nearside Side repeater missing |1.4.A.2b| | 1 |
Offside Side repeater missing |1.4.A.2b| | 1 |
Offside Torque/reaction arm attachment bracket/mounting insecure |2.4.G.1| | 1 |
Offside Front Vehicle structure has excessive corrosion which adversely affects braking or steering |6.1.A.1| | 1 |
Nearside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Nearside Body has a sharp edge caused by corrosion |6.1.C.1| | 1 |
Nearside Front Lower Suspension arm ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
Nearside Outer Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc |2.5.C.1a| | 1 |
Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Nearside Front front brake binding |3.7.B.1| | 1 |