MOT History from tests of petrol HYUNDAI X2s year 1990

Review the list of common HYUNDAI X2 failures below or to perform a specific mot history check on your HYUNDAI then use our popular KnowYourCar service

mot history

Pass percent:41.38%

(The average a petrol HYUNDAI X2 year 1990 passes without issue)

Based on:29 MOT Tests

Most common failures	No# failures
Nearside Headlamp not working on dipped beam \|1.7.5a\|	2
Offside Rear Suspension component mounting prescribed area is excessively corroded \|2.4.A.3\|	2
Exhaust emissions carbon monoxide content excessive \|7.3.B.1a\|	2
Nearside Seat belt anchorage prescribed area is excessively corroded \|5.2.6\|	1
Nearside Rear Lower Subframe mounting prescribed area is excessively corroded \|2.4.A.3\|	1
Nearside Front Lower Seat belt anchorage prescribed area is excessively corroded \|5.2.6\|	1
Offside Front constant velocity joint gaiter split \|2.5.C.1a\|	1
Service brake: efficiency below requirements \|3.7.B.7\|	1
Parking brake: efficiency below requirements \|3.7.B.7\|	1
Rear parking brake recording little or no effort	1
Rear brake application uneven	1
Nearside Front Front position lamp\|s\| not working \|1.1.A.3b\|	1
Nearside Outer Rear Seat belt anchorage prescribed area is excessively corroded \|5.2.6\|	1
Offside Outer Rear Seat belt anchorage prescribed area is excessively corroded \|5.2.6\|	1
Nearside Rear Suspension component mounting prescribed area is excessively corroded \|2.4.A.3\|	1
Brake pipe excessively corroded	1
Dipswitch operation does not deflect all main beam headlamps to make them dipped beams \|1.7.4b\|	1
Offside Headlamp not working on dipped beam \|1.7.5a\|	1
Windscreen has a sticker or other obstruction encroaching into the swept area by more than 40mm outside zone `A` \|8.3.1e\|	1
Nearside Rear Shock absorber has negligible damping effect \|2.7.5\|	1
Offside Rear Shock absorber has negligible damping effect \|2.7.5\|	1
Nearside Stop lamp not working \|1.2.1b\|	1
Exhaust emissions hydrocarbon content excessive \|7.3.B.1b\|	1
Nearside Front position lamp\|s\| not working \|1.1.A.3b\|	1
Offside Rear Subframe mounting prescribed area is excessively corroded \|2.4.A.3\|	1
Rear Exhaust has a major leak of exhaust gases \|7.1.2\|	1
Offside Rear Body has a sharp edge caused by corrosion \|6.1.C.1\|	1
Registration plate lamp issues	1

We get to these numbers by trawling through over 1 billion MOT test results since 2004 and crunched the numbers. We remove anything to do with Tyres, as they are model independent and group together common non-model specific issues. We are trying to get to a picture of what models have what issues.

Please note: We take the data from the DVSA. This data is raw and can contain typos and spelling mistakes that garages may have entered while recording a MOT result. Specifically miss-match on names of models and makes. We are constantly cleaning the data so bear with the odd issue.

Got suggestions? We’re improving this section all the time. If you have any suggestions, please let us know.

Most common failures	No# failures
Nearside Headlamp not working on dipped beam \|1.7.5a\|	2
Offside Rear Suspension component mounting prescribed area is excessively corroded \|2.4.A.3\|	2
Exhaust emissions carbon monoxide content excessive \|7.3.B.1a\|	2
Nearside Seat belt anchorage prescribed area is excessively corroded \|5.2.6\|	1
Nearside Rear Lower Subframe mounting prescribed area is excessively corroded \|2.4.A.3\|	1
Nearside Front Lower Seat belt anchorage prescribed area is excessively corroded \|5.2.6\|	1
Offside Front constant velocity joint gaiter split \|2.5.C.1a\|	1
Service brake: efficiency below requirements \|3.7.B.7\|	1
Parking brake: efficiency below requirements \|3.7.B.7\|	1
Rear parking brake recording little or no effort	1
Rear brake application uneven	1
Nearside Front Front position lamp\|s\| not working \|1.1.A.3b\|	1
Nearside Outer Rear Seat belt anchorage prescribed area is excessively corroded \|5.2.6\|	1
Offside Outer Rear Seat belt anchorage prescribed area is excessively corroded \|5.2.6\|	1
Nearside Rear Suspension component mounting prescribed area is excessively corroded \|2.4.A.3\|	1
Brake pipe excessively corroded	1
Dipswitch operation does not deflect all main beam headlamps to make them dipped beams \|1.7.4b\|	1
Offside Headlamp not working on dipped beam \|1.7.5a\|	1
Windscreen has a sticker or other obstruction encroaching into the swept area by more than 40mm outside zone `A` \|8.3.1e\|	1
Nearside Rear Shock absorber has negligible damping effect \|2.7.5\|	1
Offside Rear Shock absorber has negligible damping effect \|2.7.5\|	1
Nearside Stop lamp not working \|1.2.1b\|	1
Exhaust emissions hydrocarbon content excessive \|7.3.B.1b\|	1
Nearside Front position lamp\|s\| not working \|1.1.A.3b\|	1
Offside Rear Subframe mounting prescribed area is excessively corroded \|2.4.A.3\|	1
Rear Exhaust has a major leak of exhaust gases \|7.1.2\|	1
Offside Rear Body has a sharp edge caused by corrosion \|6.1.C.1\|	1
Registration plate lamp issues	1

MOT History from tests of petrol HYUNDAI X2s year 1990

Find us on Facebook