Most common failures | No# failures |
---|
Headlamp aim out of alignment | 6 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 4 |
Drive chain excessively loose |6.2.1d| | 4 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 4 |
Drive chain worn to excess |6.2.1e| | 3 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 3 |
Horn not working |1.7.3a| | 2 |
Headlamp switch faulty |1.2.4| | 2 |
Rear Drive chain sprocket worn to excess |6.2.1e| | 2 |
Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Rear wheel spindle loose |2.4.A.2b| | 1 |
Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 1 |
Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
Rear Drive chain worn to excess |6.2.1e| | 1 |
Direction indicator not working |1.5.1c| | 1 |
Rear position lamp adversely affected by the operation of another lamp |1.1.3b| | 1 |
Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
Stop lamp does not illuminate by the operation of both brake controls (4.3.2 (a) (iii)) | 1 |
Rear position lamp insecure |1.1.1c| | 1 |
Rear Roller brake test indicates a severely grabbing brake |3.3.A1b| | 1 |
Front Front wheel bearings have excessive free play |2.3.5b| | 1 |
Rear Drive chain excessively loose |6.2.1d| | 1 |
Front All direction indicators obviously incorrectly positioned closer than 240mm between illuminated surfaces (4.4.3 (a)) | 1 |
Rear All direction indicators obviously incorrectly positioned closer than 180mm between illuminated surfaces (4.4.3 (a)) | 1 |
Rear Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Exhaust excessively deteriorated |7.1.1a| | 1 |
Fuel cap does not fasten securely maintaining the sealing arrangement |7.2.2b| | 1 |
Fuel cap sealing washer missing |7.2.2c| | 1 |
Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
Front Dipswitch does not extinquish main beam/s, leaving at least 1 dipped beam headlamp |1.2.2b|i|| | 1 |
Front Wheel spoke cracked. |4.2.1b| | 1 |
Rear Brake pedal is damaged and the brake cannot be readily applied |3.1.3c| | 1 |
Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Front Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
Rear Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Steering headbearing has excessive free play |2.2.2| | 1 |
Front Brake lever is bent and the brake cannot be readily applied |3.1.3c| | 1 |
Direction indicators flashing more than 120 times per minute |1.5.1c| | 1 |
Front Brake disc|s| has excessive run out |3.2.A1m| | 1 |
Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Rear Stop lamp affected by the operation of another lamp |1.3.2| | 1 |
Front Position lamp not working (4.2.1 (a)) | 1 |
Headlamp aim projected beam image obviously incorrect (4.1.2 (c)) | 1 |
Front wheel spindle loose |2.3.3a| | 1 |
Direction indicators not working |1.5.1c| | 1 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Registration plate issues | 1 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Offside Front Direction indicators flashing more than 120 times per minute |1.5.1c| | 1 |
Front Plate brake test indicates a binding brake |3.3.B1a| | 1 |
Rear Rear position lamp incorrect colour |1.1.2b| | 1 |
Rear Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 1 |
Rear Exhaust excessively deteriorated |7.1.1a| | 1 |
Front Horn not working |1.7.3a| | 1 |
Nearside Front Position lamp switch insecure |1.1.4b| | 1 |
Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
Rear Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
Front Headlamp aim beam image kick up to the offside |1.6| | 1 |
Nearside Front Direction indicator not working |1.5.1c| | 1 |
Rear Drive chain excessively tight |6.2.1d| | 1 |