MOT History from tests of petrol HYOSUNG RTs year 2006

Review the list of common HYOSUNG RT failures below or to perform a specific mot history check on your HYOSUNG then use our popular KnowYourCar service

mot history

Pass percent:57.14%

(The average a petrol HYOSUNG RT year 2006 passes without issue)

Based on:21 MOT Tests

Most common failures	No# failures
Rear Rear wheel bearings have excessive free play \|2.4.A.2c\|	2
Headlamp aim out of alignment	2
Front Brake disc\|s\| excessively worn \|3.2.A1l\|	1
Headlamp at least one does not illuminate on main beam \|1.2.2a\|ii\|\|	1
Front Horn not working \|1.7.3a\|	1
Front Stop lamp remains on when the brake is released \|1.3.1e\|	1
Rear Stop lamp remains on when the brake is released \|1.3.1e\|	1
Rear Roller brake test indicates brake effort rise disproportional to brake lever or pedal effort \|3.3.A1c\|	1
Front Handlebar deformed \|2.1.1b\|	1
Centre Motorcycle structure excessively damaged \|6.1.1a\|	1
Roller brake test No brake control achieves an efficiency of 30%. \|3.3.A2a\|	1
Roller brake test Neither brake control achieves an efficiency of 25% \|3.3.A2b\|	1
Front wheel bearings have excessive free play \|2.3.5b\|	1
Headlamp at least one does not illuminate on dipped beam \|1.2.2a\|i\|\|	1
Rear position lamp does not illuminate immediately when it is switched on \|1.1.3a\|	1
Steering movement excessively `notchy` with the wheel raised \|2.2.1b\|	1
Drive chain excessively loose \|6.2.1d\|	1
Front Headlamp at least one does not illuminate on dipped beam \|1.2.2a\|i\|\|	1
Rear Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	1
Rear Roller brake test indicates a sticking brake \|3.3.A1a\|	1
Rear Drive chain worn to excess \|6.2.1e\|	1
Rear Drive chain sprocket worn to excess \|6.2.1e\|	1
Nearside Locking device\|s\| not correctly fitted which may make the motor bicycle dangerous to ride \|6.2.1h\|	1
Front Front shock absorber seal failed and leaking oil \|2.3.3\|	1
Rear Rear shock absorber has inadequate damping effect. \|2.4.A.3b\|	1
Offside Headlamp switch faulty \|1.2.4\|	1
Nearside Front Roller brake test indicates a sticking brake \|3.3.A1a\|	1
Riders seat insecure \|6.2.1a\|	1
Exhaust is leaking and excessively noisey \|7.1.1b\|	1
Rear shock absorber has inadequate damping effect. \|2.4.A.3b\|	1
Offside Handlebar deformed \|2.1.1b\|	1
Nearside Front shock absorber seal failed and leaking oil \|2.3.3\|	1
Offside Front shock absorber seal failed and leaking oil \|2.3.3\|	1
Nearside Rear Footrest missing \|6.2.1a\|	1
Offside Rear Footrest missing \|6.2.1a\|	1

We get to these numbers by trawling through over 1 billion MOT test results since 2004 and crunched the numbers. We remove anything to do with Tyres, as they are model independent and group together common non-model specific issues. We are trying to get to a picture of what models have what issues.

Please note: We take the data from the DVSA. This data is raw and can contain typos and spelling mistakes that garages may have entered while recording a MOT result. Specifically miss-match on names of models and makes. We are constantly cleaning the data so bear with the odd issue.

Got suggestions? We’re improving this section all the time. If you have any suggestions, please let us know.

Most common failures	No# failures
Rear Rear wheel bearings have excessive free play \|2.4.A.2c\|	2
Headlamp aim out of alignment	2
Front Brake disc\|s\| excessively worn \|3.2.A1l\|	1
Headlamp at least one does not illuminate on main beam \|1.2.2a\|ii\|\|	1
Front Horn not working \|1.7.3a\|	1
Front Stop lamp remains on when the brake is released \|1.3.1e\|	1
Rear Stop lamp remains on when the brake is released \|1.3.1e\|	1
Rear Roller brake test indicates brake effort rise disproportional to brake lever or pedal effort \|3.3.A1c\|	1
Front Handlebar deformed \|2.1.1b\|	1
Centre Motorcycle structure excessively damaged \|6.1.1a\|	1
Roller brake test No brake control achieves an efficiency of 30%. \|3.3.A2a\|	1
Roller brake test Neither brake control achieves an efficiency of 25% \|3.3.A2b\|	1
Front wheel bearings have excessive free play \|2.3.5b\|	1
Headlamp at least one does not illuminate on dipped beam \|1.2.2a\|i\|\|	1
Rear position lamp does not illuminate immediately when it is switched on \|1.1.3a\|	1
Steering movement excessively `notchy` with the wheel raised \|2.2.1b\|	1
Drive chain excessively loose \|6.2.1d\|	1
Front Headlamp at least one does not illuminate on dipped beam \|1.2.2a\|i\|\|	1
Rear Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	1
Rear Roller brake test indicates a sticking brake \|3.3.A1a\|	1
Rear Drive chain worn to excess \|6.2.1e\|	1
Rear Drive chain sprocket worn to excess \|6.2.1e\|	1
Nearside Locking device\|s\| not correctly fitted which may make the motor bicycle dangerous to ride \|6.2.1h\|	1
Front Front shock absorber seal failed and leaking oil \|2.3.3\|	1
Rear Rear shock absorber has inadequate damping effect. \|2.4.A.3b\|	1
Offside Headlamp switch faulty \|1.2.4\|	1
Nearside Front Roller brake test indicates a sticking brake \|3.3.A1a\|	1
Riders seat insecure \|6.2.1a\|	1
Exhaust is leaking and excessively noisey \|7.1.1b\|	1
Rear shock absorber has inadequate damping effect. \|2.4.A.3b\|	1
Offside Handlebar deformed \|2.1.1b\|	1
Nearside Front shock absorber seal failed and leaking oil \|2.3.3\|	1
Offside Front shock absorber seal failed and leaking oil \|2.3.3\|	1
Nearside Rear Footrest missing \|6.2.1a\|	1
Offside Rear Footrest missing \|6.2.1a\|	1

MOT History from tests of petrol HYOSUNG RTs year 2006

Find us on Facebook