Most common failures | No# failures |
---|
Headlamp aim out of alignment | 19 |
Drive chain excessively loose |6.2.1d| | 10 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 7 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 7 |
Drive chain worn to excess |6.2.1e| | 5 |
Front wheel bearings have excessive free play |2.3.5b| | 5 |
Rear suspension bearing has excessive free play |2.4.A2a|i|| | 4 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 4 |
Drive chain excessively tight |6.2.1d| | 3 |
Front wheel bearings are excessively rough |2.3.5b| | 3 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 3 |
Steering movement excessively stiff with the weight on the lower bearing |2.2.1a| | 2 |
Horn not working |7.7 |a| |ii|| | 2 |
Rear Drive chain sprocket worn to excess |6.2.1e| | 2 |
Registration plate issues | 2 |
Rear Stop lamp not working (4.3.1 (a) (ii)) | 2 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 2 |
Rear Rear wheel bearings are excessively rough |2.4.A.2c| | 1 |
Drive chain sprocket worn to excess |6.2.1e| | 1 |
Stop lamp adversely affected by the operation of another lamp poss bulb in wrong |4.3.3 |b|| | 1 |
Offside Footrest insecure |6.2.1a| | 1 |
Front Wheel bearing so rough it is likely to overheat or break up (5.1.3 (b) (ii)) | 1 |
Front Stop lamp not working brake |4.3.1 |a| |ii|| | 1 |
Rear Position lamp not working |4.2.1 |a|| | 1 |
Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition |8.1.1 |a|| | 1 |
Drive chain worn to excess |6.1.7 |c| |i|| | 1 |
Drive chain excessively tight |6.1.7 |k| |i|| | 1 |
Rear Drive chain sprocket worn to excess |6.1.7 |c| |i|| | 1 |
Offside Rear Direction indicator incorrect colour |1.5.1b| | 1 |
Drive chain excessively loose (6.1.7 (c) (i)) | 1 |
Stop lamp not working (4.3.1 (a) (ii)) | 1 |
Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
Rear suspension bush has excessive free play Swingarm |2.4.A2a|i|| | 1 |
Front Stop lamp not working (4.3.1 (a) (ii)) | 1 |
Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
Front Stop lamp does not illuminate by the operation of both brake controls (4.3.2 (a) (iii)) | 1 |
Rear Brake pedal is positioned so that the brake cannot be readily applied (1.1.2 (d)) | 1 |
Horn not working (7.7 (a) (ii)) | 1 |
Offside Front Shock absorber has a serious fluid leak |5.3.2 |b|| | 1 |
Throttle operating incorrectly |6.2.1f| | 1 |
Rear suspension bearing has excessive free play swingarm |2.4.A2a|i|| | 1 |
Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 1 |
Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 1 |
Direction indicators not working |1.5.1c| | 1 |
Front Floor brake test indicates a binding brake |3.3.C2c| | 1 |
Chain guard insecure |6.2.1c| | 1 |
Nearside Fuel hose leaking (6.1.3 (b) (i)) | 1 |
Rear Brake excessively binding (1.2.1 (f)) | 1 |
Handlebar deformed |2.1.1b| | 1 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 1 |
Brake fluid reservoir fluid level dangerously low |3.2.B1d| | 1 |
Front Brake lever is inoperative |3.1.3c| | 1 |
Stop lamp remains on when the brakes are released | 1 |
Brake hose damaged | 1 |
Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride Chain split link |6.2.1h| | 1 |
Rear suspension bush has excessive free play swing arm |2.4.A2a|i|| | 1 |
Rear Roller brake test indicates a binding brake Posibly wheel bearing |3.3.A1a| | 1 |
Rear Drive chain excessively loose |6.2.1d| | 1 |
Offside Direction indicators not working |1.5.1c| | 1 |
Front Position lamp not working (4.2.1 (a)) | 1 |
Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 1 |
Headlamp not working on main beam (4.1.1 (a) (ii)) | 1 |
Headlamp aim not tested (4.1.2 (b)) | 1 |
Front Wheel bearing has excessive play (5.1.3 (a) (i)) | 1 |
Rear Roller brake test indicates a binding brake |3.3.A1a| | 1 |
Exhaust has a major leak of exhaust gases |6.1.2 |a|| | 1 |
Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Brake pedal attachment screws loose |3.1.2b| | 1 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 1 |
Rear Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Exhaust mounting missing |7.1.1c| | 1 |
Riders seat insecure |6.2.1a| | 1 |
Offside Rear Direction indicators not working |1.5.1c| | 1 |
Rear suspension fouling which affects the movement of the rear suspension FOULING ON EXHAUST |2.4.A.3a| | 1 |
Front Fuel pipe leaking |6.1.3 |b| |i|| | 1 |
Registration plate lamp issues | 1 |
Rear Position lamp not working (4.2.1 (a)) | 1 |
Stop lamp deteriorated and function impaired |1.3.3a| | 1 |
Front Brake hose fouling |3.2.B3b| | 1 |
Stop lamp not working front brake |4.3.1 |a| |ii|| | 1 |
Front Brake excessively binding |1.2.1 |f|| | 1 |
Front Drive chain sprocket worn to excess |6.2.1e| | 1 |
All position lamps do not illuminate immediately when switched on |1.1.3a| | 1 |
Front Floor brake test indicates a sticking brake |3.3.C2c| | 1 |
Rear reflector on motorcycle missing |1.4.1| | 1 |