| Most common failures | No# failures |
|---|
| Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 31 |
| Headlamp aim out of alignment | 28 |
| Drive chain excessively loose |6.2.1d| | 14 |
| Horn not working |1.7.3a| | 13 |
| Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 9 |
| Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 9 |
| Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 8 |
| Rear reflector on motorcycle missing |1.4.1| | 7 |
| Drive chain worn to excess |6.2.1e| | 7 |
| Registration plate issues | 6 |
| Exhaust is leaking and excessively noisey |7.1.1b| | 6 |
| Headlamp aim beam image kick up to the offside |1.6| | 6 |
| Rear Roller brake test indicates a sticking brake |3.3.A1a| | 4 |
| Front Brake excessively binding (1.2.1 (f)) | 4 |
| Front Roller brake test indicates a binding brake |3.3.A1a| | 4 |
| Rear Brake pedal has inadequate reserve travel |3.1.3b| | 4 |
| Drive chain sprocket carrier worn to excess |6.2.1e| | 4 |
| Front wheel bearings have excessive free play |2.3.5b| | 4 |
| Drive chain excessively tight |6.2.1d| | 3 |
| Rear reflector missing (4.8.2 (a) (ii)) | 3 |
| Headlamp switch faulty |1.2.4| | 3 |
| Front position lamp does not illuminate immediately when switched on |1.1.3a| | 3 |
| Rear Roller brake test indicates a binding brake |3.3.A1a| | 3 |
| Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 3 |
| Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 3 |
| Stop lamp remains on when the brake is released |1.3.1e| | 3 |
| Handlebar deformed |2.1.1b| | 3 |
| Rear Brake pedal has insufficient reserve travel (1.1.2 (a)) | 3 |
| Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i)) | 3 |
| Wheel alignment incorrect which adversely affects the handling |2.5.1| | 2 |
| Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
| Rear Brake lining|s| less than 1.5 mm thick |3.2.A1f|i|| | 2 |
| Headlamp aim so that beam "kick up" is not visible on the screen |1.6.B.1| | 2 |
| Brake pedal has inadequate reserve travel |3.1.3b| | 2 |
| Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 2 |
| Offside Front Direction indicator not working |1.5.1c| | 2 |
| Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 2 |
| Rear wheel bearings have excessive free play |2.4.A.2c| | 2 |
| Front Headlamp aim beam image kick up to the offside |1.6| | 2 |
| Rear Rear wheel bearings have excessive free play |2.4.A.2c| | 2 |
| Rear Drive chain sprocket worn to excess |6.2.1e| | 2 |
| Rear Brake pedal cannot be applied smoothly |3.1.3d| | 2 |
| Rear suspension bush has excessive free play |2.4.A2a|i|| | 2 |
| Drive chain horseshoe locking device incorrectly fitted (6.1.7 (j) (i)) | 2 |
| Front Wheel bearing rough when rotated (5.1.3 (b) (i)) | 2 |
| Nearside Rear Direction indicator insecure |1.5.3b| | 2 |
| Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 2 |
| Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
| Nearside Rear Direction indicator not working (4.4.1 (a) (ii)) | 2 |
| Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 2 |
| Stop lamp remains on when the brakes are released | 2 |
| Rear Position lamp not working (4.2.1 (a)) | 2 |
| Headlamp not working on main beam (4.1.1 (a) (ii)) | 2 |
| Drive chain excessively loose (6.1.7 (c) (i)) | 2 |
| Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition (8.1.1 (a)) | 2 |
| Rear Floor brake test indicates a binding brake |3.3.C2c| | 2 |
| Front Floor brake test indicates a binding brake |3.3.C2c| | 2 |
| Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 2 |
| Rear Floor brake test indicates a sticking brake |3.3.C2c| | 2 |
| Front Stop lamp does not illuminate immediately a brake applies (1.3.1a) | 2 |
| Nearside Rear Drive chain horseshoe locking device incorrectly fitted (6.1.7 (j) (i)) | 1 |
| Steering headbearing has excessive free play |2.2.2| | 1 |
| Offside Front Lower Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
| Nearside Rear Lower Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
| Front Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
| Offside Front Headlamp switch insecure |1.2.4| | 1 |
| Nearside Front Brake caliper|s| securing bolt|s| loose |3.2.A1j| | 1 |
| Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
| Front Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
| Front Direction indicator not working |1.5.1c| | 1 |
| Dipswitch does not deflect the main beam/s, making them into dipped beam/s |1.2.2b|ii|| | 1 |
| Front Roller brake test indicates a sticking brake |3.3.A1a| | 1 |
| Rear Rear position lamp does not illuminate immediately when it is switched on rear stop light not working |1.1.3a| | 1 |
| Offside Rear Brake component inadequately mounted split pin missing (1.1.21 (c)) | 1 |
| Front Direction indicators not working |1.5.1c| | 1 |
| Rear Direction indicators not working |1.5.1c| | 1 |
| Direction indicators not working |1.5.1c| | 1 |
| Rear Rear reflector on motorcycle missing |1.4.1| | 1 |
| Front Drive chain sprocket worn to excess |6.2.1e| | 1 |
| Offside Front Direction indicators affected by the operation of another lamp |1.5.1c| | 1 |
| Front Brake hose excessively stretched also trapping in headstock (1.1.12 (b) (ii)) | 1 |
| Offside Rear Drive chain sprocket so loose it is likely to fail 1 bolt missing all others loose under locktabs (6.1.7 (c) (ii)) | 1 |
| Offside Exhaust system insecure brackets loose also catching on rear arm (6.1.2 (a)) | 1 |
| Front wheel bearings are excessively rough |2.3.5b| | 1 |
| Exhaust excessively deteriorated |7.1.1a| | 1 |
| Front Brake lever has inadequate reserve travel |3.1.3b| | 1 |
| Rear Brake component insecure split pin missing reaction bracket (1.1.21 (c)) | 1 |
| Brake locking device insecure |3.2.A1e| | 1 |
| Offside Front Direction indicator not working (4.4.1 (a) (ii)) | 1 |
| Direction indicator not working all indicators not working (4.4.1 (a) (ii)) | 1 |
| Front Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 1 |
| Offside Front Footrest insecure |6.2.1a| | 1 |
| Offside Front Direction indicators not working |1.5.1c| | 1 |
| Rear Brake pedal is positioned so that the brake cannot be readily applied |3.1.3c| | 1 |
| Offside Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
| Direction indicators not working all |1.5.1c| | 1 |
| Shock absorber has a serious fluid leak front left hand |5.3.2 |b|| | 1 |
| Drive chain worn to excess Drive chain and sprockets worn/loose. |6.2.1e| | 1 |
| Rear Brake clevis joint insecure Locking dev ice mussing from rear brake torque arm (1.1.15 (c)) | 1 |
| Fuel hose damaged (6.1.3 (c) (ii)) | 1 |
| Registration plate lamp issues | 1 |
| Horn not working (7.7 (a) (ii)) | 1 |
| Throttle control functioning such that safe operation of the motorcycle is adversely affected Engine speed changes when steering moved (6.2.7 (a) (ii)) | 1 |
| Rear Brake grabbing severely (1.2.1 (c)) | 1 |
| Front Stop lamp not working |4.3.1 |a| |ii|| | 1 |
| Rear Brake excessively binding (1.2.1 (f)) | 1 |
| Indicator switch insecure |1.5.4| | 1 |
| Rear Brake reaction bracket securing bolt|s| missing |3.2.A1j| | 1 |
| Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition baffels fitted |8.1.1 |a|| | 1 |
| Stop lamp affected by the operation of another lamp |1.3.2| | 1 |
| Brake locking device missing |3.2.A1e| | 1 |
| Fuel system component leaking (6.1.3 (b) (i)) | 1 |
| Rear Wheel bearing so rough it is likely to overheat or break up |5.1.3 |b| |ii|| | 1 |
| Rear Brake effort inadequate at a wheel insufficient (1.2.1 (a) (i)) | 1 |
| Offside Rear Direction indicator not working |1.5.1c| | 1 |
| Offside Rear Direction indicator not working (4.4.1 (a) (ii)) | 1 |
| Rear Brake has no recorded effort at a wheel (1.2.1 (a) (ii)) | 1 |
| Offside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
| Front Wheel bearing play so excessive it is likely to break up (5.1.3 (a) (ii)) | 1 |
| Drive chain excessively tight, so that it is likely to fail (6.1.7 (k) (ii)) | 1 |
| Rear Wheel hub excessively worn (5.2.1 (b) (i)) | 1 |
| Drive chain sprocket worn to excess Couch drive (6.1.7 (c) (i)) | 1 |
| Drive chain sprocket carrier worn to excess sprocket carrier bearing |6.2.1e| | 1 |
| Nearside Indicator tell tale not operating correctly |1.5.2| | 1 |
| Throttle control functioning such that safe operation of the motorcycle is adversely affected Bike revs up on RH lock (6.2.7 (a) (ii)) | 1 |
| Rear Wheel hub excessively worn Hub Bearing and Cush drive rubbers excessive play (5.2.1 (b) (i)) | 1 |
| Headlamp aim headlamp deteriorated and function impaired |1.2.3a| | 1 |
| Rear suspension bearing has excessive free play |2.4.A2a|i|| | 1 |
| Front Wheel bearing has excessive play (5.1.3 (a) (i)) | 1 |
| Rear reflector on motorcycle obscured |1.4.1| | 1 |
| Stop lamp not working via front brake (4.3.1 (a) (ii)) | 1 |
| Front Stop lamp not working (4.3.1 (a) (ii)) | 1 |
| Offside Front Brake fluid reservoir fluid level dangerously low |3.2.B1d| | 1 |
| Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
| Handlebar mounting clamp bolt loose |2.1.1a| | 1 |
| Nearside Rear Direction indicator not working |1.5.1c| | 1 |
| Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
| Indicator tell tale not operating correctly |1.5.2| | 1 |
| Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 1 |
| Rear suspension component excessively corroded. |2.4.A.1a| | 1 |
| Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
| Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition |8.1.1 |a|| | 1 |
| Front Brake fluid significantly below minimum mark |1.1.10 |d| |ii|| | 1 |
| Headlamp insecure |1.2.3b| | 1 |
| Nearside Indicator switch insecure |1.5.4| | 1 |
| Horn is not continous or uniform |1.7.3c| | 1 |
| Horn not loud enough to be heard by another road user |1.7.3a| | 1 |
| Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 1 |
| Headlamp insecure (4.1.1 (c)) | 1 |
| Rear Stop lamp not working (4.3.1 (a) (ii)) | 1 |
| Throttle operating incorrectly (6.2.7 (a) (i)) | 1 |
| Steering operation restricted in free movement from lock to lock speedo cable |2.1.4 |c|| | 1 |
| Drive chain excessively loose |6.1.7 |c| |i|| | 1 |
| Headlamp aim not tested |1.6| | 1 |
| Rear Brake component has restricted free movement and operation is likely to be impeded |3.2.A1h| | 1 |
| Front Direction indicator obviously incorrectly positioned |4.4.3 |a|| | 1 |
| Throttle operating incorrectly |6.2.1f| | 1 |
| Rear suspension fouling which affects the movement of the rear suspension |2.4.A.3a| | 1 |
| Rear Brake reaction bracket insecure |3.2.A1j| | 1 |
| Front Stop lamp deteriorated and function impaired |1.3.3a| | 1 |
| Drive chain sprocket worn to excess |6.2.1e| | 1 |
| Brake pedal attachment screws loose |3.1.2b| | 1 |
| Front Stop lamp does not illuminate immediately a brake applies op
|1.3.1a| | 1 |
| Offside Front shock absorber seal failed and leaking oil stancion badly corroded |2.3.3| | 1 |
| Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 1 |
| Steering movement excessively `notchy` with the wheel raised defect more pronounced on right lock |2.2.1b| | 1 |
| Rear Footrest missing (6.2.12 (a)) | 1 |
| Stop lamp switch with a delay in operation stop lamp goes out when brake fullyn applied (4.3.2 (a) (ii)) | 1 |
| Rear Wheel alignment incorrect which adversely affects the handling (2.4 (a)) | 1 |
| Rear Rear suspension bearing has excessive free play |2.4.A2a|i|| | 1 |
| Drive chain sprocket excessively loose (6.1.7 (c) (i)) | 1 |
| Front Stop lamp does not illuminate by the operation of both brake controls front (hand control) brake lever does not operate rear stop light (4.3.2 (a) (iii)) | 1 |
| Riders seat insecure (6.2.1a) | 1 |
| Seat insecure (6.2.1a) | 1 |
| Front Roller brake test indicates excessive fluctuation of brake effort (3.3.A1d) | 1 |
| Front Roller brake test indicates a binding brake (3.3.A1a) | 1 |
| Offside Indicator tell tale not functioning |1.5.2| | 1 |
| Offside Front Upper Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
| Offside Rear Lower Roller brake test indicates a binding brake |3.3.A1a| | 1 |
| Rear Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
| Rear Built up wheel has a loose bolt/s |4.2.1c| | 1 |
| Front Plate brake test indicates a binding brake |3.3.B1a| | 1 |
| Rear Plate brake test indicates a sticking brake |3.3.B1a| | 1 |
| Rear Stop lamp damaged and function impaired |1.3.3a| | 1 |
| Front Brake disc significantly and obviously worn (1.1.14 (a) (i)) | 1 |
| Stop lamp not working both light not working (4.3.1 (a) (ii)) | 1 |
| Brake lagging in operation to much travil on pedal (1.2.1 (d)) | 1 |
| Rear Stop lamp not working |4.3.1 |a| |ii|| | 1 |
| Front Exhaust has a major leak of exhaust gases |6.1.2 |a|| | 1 |
| Rear Position lamp showing white light to the rear |4.2.3 |a| |ii|| | 1 |