MOT History from tests of petrol HYOSUNG GT250s year 2008

Review the list of common HYOSUNG GT250 failures below or to perform a specific mot history check on your HYOSUNG then use our popular KnowYourCar service

mot history

Pass percent:65.79%

(The average a petrol HYOSUNG GT250 year 2008 passes without issue)

Based on:76 MOT Tests

Most common failures	No# failures
Headlamp aim out of alignment	8
Drive chain excessively tight \|6.2.1d\|	4
Rear reflector on motorcycle missing \|1.4.1\|	4
Rear shock absorber has inadequate damping effect. \|2.4.A.3b\|	3
Drive chain excessively loose \|6.2.1d\|	3
Rear shock absorber seal failed and leaking oil \|2.4.A.1c\|	2
Drive chain worn to excess \|6.2.1e\|	2
Front Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	2
Nearside Front shock absorber seal failed and leaking oil \|2.3.3\|	2
Front suspension has inadequate damping effect. \|2.3.6c\|	2
Offside Front shock absorber seal failed and leaking oil \|2.3.3\|	2
Rear Roller brake test indicates a binding brake \|3.3.A1a\|	1
Front Roller brake test indicates a sticking brake \|3.3.A1a\|	1
Rear reflector missing (4.8.2 (a) (ii))	1
Nearside Rear Drive chain worn to excess (6.1.7 (c) (i))	1
Nearside Rear Drive chain horseshoe locking device incorrectly fitted (6.1.7 (j) (i))	1
Offside Front Direction indicators not working \|1.5.1c\|	1
Direction indicator insecure both front \|1.5.3b\|	1
Front Floor brake test indicates a binding brake \|3.3.C2c\|	1
Nearside Front suspension assembly component missing \|2.3.1\|	1
Offside Front suspension assembly component missing \|2.3.1\|	1
Brake pipe excessively corroded	1
Riders seat insecure \|6.2.1a\|	1
Nearside Front Front shock absorber seal failed and leaking oil \|2.3.3\|	1
Horn not loud enough to be heard by another road user \|1.7.3a\|	1
Nearside Rear Direction indicator not working \|1.5.1c\|	1
Steering lock stop maladjusted \|2.1.3\|	1
Front Direction indicators flashing more than 120 times per minute \|1.5.1c\|	1
Rear Direction indicators not working \|1.5.1c\|	1
Nearside Front Direction indicator not working \|1.5.1c\|	1
Handlebar handgrip not secure to handlebars. \|2.1.1c\|	1
Rear Drive chain sprocket worn to excess \|6.2.1e\|	1
Horn not working \|1.7.3a\|	1
Horn not working (7.7 (a))	1
Stop lamp does not emit a steady light \|1.3.1b\|	1
Offside Rear Footrest missing \|6.2.1a\|	1
Indicator switch insecure \|1.5.4\|	1
Seat insecure \|6.2.1a\|	1
Throttle has a significant change in engine speed whilst moving the steering from lock to lock \|2.1.4\|	1
Rear Stop lamp affected by the operation of another lamp \|1.3.2\|	1
Rear Stop lamp remains on when the brake is released \|1.3.1e\|	1
Front Roller brake test indicates a binding brake \|3.3.A1a\|	1

We get to these numbers by trawling through over 1 billion MOT test results since 2004 and crunched the numbers. We remove anything to do with Tyres, as they are model independent and group together common non-model specific issues. We are trying to get to a picture of what models have what issues.

Please note: We take the data from the DVSA. This data is raw and can contain typos and spelling mistakes that garages may have entered while recording a MOT result. Specifically miss-match on names of models and makes. We are constantly cleaning the data so bear with the odd issue.

Got suggestions? We’re improving this section all the time. If you have any suggestions, please let us know.

Most common failures	No# failures
Headlamp aim out of alignment	8
Drive chain excessively tight \|6.2.1d\|	4
Rear reflector on motorcycle missing \|1.4.1\|	4
Rear shock absorber has inadequate damping effect. \|2.4.A.3b\|	3
Drive chain excessively loose \|6.2.1d\|	3
Rear shock absorber seal failed and leaking oil \|2.4.A.1c\|	2
Drive chain worn to excess \|6.2.1e\|	2
Front Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	2
Nearside Front shock absorber seal failed and leaking oil \|2.3.3\|	2
Front suspension has inadequate damping effect. \|2.3.6c\|	2
Offside Front shock absorber seal failed and leaking oil \|2.3.3\|	2
Rear Roller brake test indicates a binding brake \|3.3.A1a\|	1
Front Roller brake test indicates a sticking brake \|3.3.A1a\|	1
Rear reflector missing (4.8.2 (a) (ii))	1
Nearside Rear Drive chain worn to excess (6.1.7 (c) (i))	1
Nearside Rear Drive chain horseshoe locking device incorrectly fitted (6.1.7 (j) (i))	1
Offside Front Direction indicators not working \|1.5.1c\|	1
Direction indicator insecure both front \|1.5.3b\|	1
Front Floor brake test indicates a binding brake \|3.3.C2c\|	1
Nearside Front suspension assembly component missing \|2.3.1\|	1
Offside Front suspension assembly component missing \|2.3.1\|	1
Brake pipe excessively corroded	1
Riders seat insecure \|6.2.1a\|	1
Nearside Front Front shock absorber seal failed and leaking oil \|2.3.3\|	1
Horn not loud enough to be heard by another road user \|1.7.3a\|	1
Nearside Rear Direction indicator not working \|1.5.1c\|	1
Steering lock stop maladjusted \|2.1.3\|	1
Front Direction indicators flashing more than 120 times per minute \|1.5.1c\|	1
Rear Direction indicators not working \|1.5.1c\|	1
Nearside Front Direction indicator not working \|1.5.1c\|	1
Handlebar handgrip not secure to handlebars. \|2.1.1c\|	1
Rear Drive chain sprocket worn to excess \|6.2.1e\|	1
Horn not working \|1.7.3a\|	1
Horn not working (7.7 (a))	1
Stop lamp does not emit a steady light \|1.3.1b\|	1
Offside Rear Footrest missing \|6.2.1a\|	1
Indicator switch insecure \|1.5.4\|	1
Seat insecure \|6.2.1a\|	1
Throttle has a significant change in engine speed whilst moving the steering from lock to lock \|2.1.4\|	1
Rear Stop lamp affected by the operation of another lamp \|1.3.2\|	1
Rear Stop lamp remains on when the brake is released \|1.3.1e\|	1
Front Roller brake test indicates a binding brake \|3.3.A1a\|	1

MOT History from tests of petrol HYOSUNG GT250s year 2008

Find us on Facebook