>

MOT History from tests of petrol HYOSUNG GT125Rs year 2007

Review the list of common HYOSUNG GT125R failures below or to perform a specific mot history check on your HYOSUNG then use our popular KnowYourCar service

mot history
Pass percent:56.90%
(The average a petrol HYOSUNG GT125R year 2007 passes without issue)
Based on:58 MOT Tests
Most common failuresNo# failures
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b|4
Drive chain excessively loose |6.2.1d|4
Throttle operating incorrectly |6.2.1f|3
Drive chain excessively tight |6.2.1d|3
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a|2
Front Steering control has Insufficient clearance at full lock affecting the riders grasp of handlebars |2.1.2b|2
Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b))2
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i||2
Nearside Front Direction indicator flashing more than 120 times per minute |1.5.1c|1
Centre Exhaust is leaking and excessively noisey |7.1.1b|1
Nearside Drive chain worn to excess |6.2.1e|1
Rear Rear shock absorber insecurely mounted |2.4.A.3b|1
Rear Rear suspension bush has excessive free play |2.4.A2a|i||1
Roller brake test No brake control achieves an efficiency of 30%. |3.3.A2a|1
Roller brake test Neither brake control achieves an efficiency of 25% |3.3.A2b|1
Front Brake cylinder severely damaged |3.2.B1b|1
Front Brake cylinder leaking hydraulic fluid |3.2.B1e|1
Nearside Front Handlebar deformed |2.1.1b|1
Nearside Front Direction indicator incorrect colour |1.5.1b|1
Offside Front Direction indicator incorrect colour |1.5.1b|1
Front Floor brake test indicates a binding brake |3.3.C2c|1
Rear shock absorber has inadequate damping effect. |2.4.A.3b|1
Rear suspension bush has excessive free play |2.4.A2a|i||1
Rear suspension bearing has excessive free play |2.4.A2a|i||1
Rear Brake pedal has inadequate reserve travel |3.1.3b|1
Nearside Rear Footrest missing |6.2.1a|1
Nearside Steering control has Insufficient clearance at full lock affecting the riders grasp of handlebars |2.1.2b|1
Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h|1
Steering operation fouling on the fuel tank or bodywork on full lock (2.1.4 (b))1
Headlamp aim so that beam "kick up" is not visible on the screen (4.1.2 (a))1
Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i||1
Nearside Front Footrest insecure |6.2.1a|1
Offside Direction indicator not working |1.5.1c|1
Nearside Direction indicator missing |1.5.1a|1
Front Horn is not a constant note |1.7.3c|1
Offside Handlebar deformed |2.1.1b|1
Drive chain worn to excess |6.2.1e|1
Front Throttle operating incorrectly |6.2.1f|1
Offside Front Brake fluid reservoir fluid level dangerously low |3.2.B1d|1
Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b|1
Registration plate issues1
Front Headlamp aim so that beam "kick up" is not visible on the screen |1.6.B.1|1
Nearside Front shock absorber seal failed and leaking oil |2.3.3|1
Brake fluid reservoir fluid level dangerously low |3.2.B1d|1
Rear reflector on motorcycle missing |1.4.1|1
Offside Front Shock absorber has a serious fluid leak (5.3.2 (b))1
Front Roller brake test indicates a binding brake |3.3.A1a|1
Rear mono-shock pivot excessively worn |2.4.B.4|1
Horn not working |1.7.3a|1
Rear wheel bearings have excessive free play |2.4.A.2c|1
Front Floor brake test indicates a severely grabbing brake |3.3.C2d|1
Wheel alignment incorrect which adversely affects the handling |2.5.1|1
Rear Drive chain sprocket worn to excess |6.2.1e|1
Exhaust mounting does not fully support the exhaust system fouling swinging arm |7.1.1.c|1
Front Brake fluid reservoir insecurely mounted |3.2.B1a|1
Front Brake fluid reservoir fluid level dangerously low |3.2.B1d|1
Rear Stop lamp remains on when the brake is released |1.3.1e|1
Offside Motorcycle structure insecure and likely to affect the correct functioning of the steering or braking switch gear lose |6.1.1c|1
Headlamp aim out of alignment1
Offside Front shock absorber seal failed and leaking oil |2.3.3|1
Front Stop lamp remains on when the brake is released |1.3.1e|1
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a|1

We get to these numbers by trawling through over 1 billion MOT test results since 2004 and crunched the numbers. We remove anything to do with Tyres, as they are model independent and group together common non-model specific issues. We are trying to get to a picture of what models have what issues.

Please note: We take the data from the DVSA. This data is raw and can contain typos and spelling mistakes that garages may have entered while recording a MOT result. Specifically miss-match on names of models and makes. We are constantly cleaning the data so bear with the odd issue.

Got suggestions? We’re improving this section all the time. If you have any suggestions, please let us know.

Find us on Facebook

© KnowYourCar™ 2019. All rights reserved
Except where otherwise noted, content on our MOT statistics pages are licensed under a Creative Commons Attribution 4.0 International license.
You are free to redistribute the material in any medium or format as long as credit is given to KnowYourCar

WARNING: We have placed hidden watermarks in our data. We will take action against our data being used outside of these terms.

MOT Data licensed under the Open Government Licence v3.0

By using our site you are agreeing to our terms and conditions
Terms & Conditions  Privacy Policy