| Most common failures | No# failures |
|---|
| Headlamp aim out of alignment | 39 |
| Drive chain excessively loose |6.2.1d| | 35 |
| Rear reflector on motorcycle missing |1.4.1| | 16 |
| Horn not working |1.7.3a| | 16 |
| Rear Roller brake test indicates a binding brake |3.3.A1a| | 14 |
| Front Roller brake test indicates a binding brake |3.3.A1a| | 14 |
| Registration plate issues | 12 |
| Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 11 |
| Drive chain worn to excess |6.2.1e| | 11 |
| Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 10 |
| Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 10 |
| Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 10 |
| Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 10 |
| Rear Drive chain sprocket worn to excess |6.2.1e| | 9 |
| Exhaust is leaking and excessively noisey |7.1.1b| | 7 |
| Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 7 |
| Front shock absorber seal failed and leaking oil |2.3.3| | 7 |
| Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 7 |
| Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 6 |
| Registration plate lamp issues | 6 |
| Rear wheel bearings have excessive free play |2.4.A.2c| | 5 |
| Stop lamp remains on when the brake is released |1.3.1e| | 5 |
| Rear Brake disc|s| excessively scored |3.2.A1l| | 5 |
| Drive chain excessively tight |6.2.1d| | 5 |
| Rear Drive chain excessively loose |6.2.1d| | 5 |
| Nearside Rear Direction indicator incorrect colour |1.5.1b| | 4 |
| Nearside Steering control has Insufficient clearance at full lock affecting the riders grasp of handlebars |2.1.2b| | 4 |
| Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i)) | 4 |
| Front Brake fluid reservoir fluid level dangerously low |3.2.B1d| | 4 |
| Drive chain horseshoe locking device incorrectly fitted (6.1.7 (j) (i)) | 4 |
| Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 4 |
| Rear Roller brake test indicates a sticking brake |3.3.A1a| | 4 |
| Nearside Rear Footrest missing |6.2.1a| | 4 |
| Direction indicators flashing more than 120 times per minute |1.5.1c| | 4 |
| Throttle operating incorrectly |6.2.1f| | 3 |
| Offside Rear Footrest missing |6.2.1a| | 3 |
| Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 3 |
| Rear reflector missing (4.8.2 (a) (ii)) | 3 |
| Rear Stop lamp not working (4.3.1 (a) (ii)) | 3 |
| Nearside Front Direction indicators not working |1.5.1c| | 3 |
| Stop lamp remains on when the brakes are released | 3 |
| Nearside Front Direction indicator not working (4.4.1 (a) (ii)) | 3 |
| Wheel alignment incorrect which adversely affects the handling |2.5.1| | 3 |
| Offside Front shock absorber seal failed and leaking oil |2.3.3| | 3 |
| Front wheel bearings are excessively rough |2.3.5b| | 3 |
| Offside Rear Direction indicator incorrect colour |1.5.1b| | 3 |
| Rear Hydraulic brake control feels spongy |3.1.4a| | 3 |
| Front Brake lever has inadequate reserve travel |3.1.3b| | 3 |
| Offside Handlebar handgrip not secure to handlebars. |2.1.1c| | 3 |
| Front Front shock absorber seal failed and leaking oil |2.3.3| | 3 |
| Position lamp switch faulty |1.1.4a| | 2 |
| Nearside Direction indicator flashing more than 120 times per minute |1.5.1c| | 2 |
| Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 2 |
| Exhaust has a major leak of exhaust gases (6.1.2 (a)) | 2 |
| Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 2 |
| Offside Steering lock stop ineffective |2.1.3| | 2 |
| Front position lamp incorrect colour |1.1.2a| | 2 |
| Horn not working |7.7 |a| |ii|| | 2 |
| Roller brake test The less effective brake control does not achieve an efficiency of 25% |1.2.2 |a| |i|| | 2 |
| Rear Drive chain excessively tight |6.2.1d| | 2 |
| Front Floor brake test indicates a binding brake |3.3.C2c| | 2 |
| Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 2 |
| Rear Rear wheel bearings have excessive free play |2.4.A.2c| | 2 |
| Nearside Handlebar deformed |2.1.1b| | 2 |
| Rear Roller brake test indicates brake effort fall disproportional to brake lever or pedal effort |3.3.A1c| | 2 |
| Drive chain excessively loose (6.1.7 (c) (i)) | 2 |
| Centre Front Horn not working |1.7.3a| | 2 |
| Steering headbearing has excessive free play |2.2.2| | 2 |
| Rear Brake disc|s| excessively worn |3.2.A1l| | 2 |
| Front Brake hose is likely to be fouled or trapped by moving parts |3.2.B2c| | 2 |
| Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
| Headlamp switch insecure |1.2.4| | 2 |
| Front suspension has inadequate damping effect. |2.3.6c| | 2 |
| Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 2 |
| Offside Steering control has Insufficient clearance at full lock affecting the riders grasp of handlebars |2.1.2b| | 2 |
| Headlamp not working on main beam |4.1.1 |a| |ii|| | 2 |
| Nearside Steering lock stop ineffective |2.1.3| | 2 |
| Nearside Rear Direction indicators not working |1.5.1c| | 2 |
| Drive chain excessively loose |6.1.7 |c| |i|| | 2 |
| Nearside Front Direction indicator not working |1.5.1c| | 2 |
| Nearside Front Direction indicator missing |1.5.1a| | 2 |
| Front wheel bearings have excessive free play |2.3.5b| | 2 |
| Nearside Handlebar deformed (2.1.1b) | 2 |
| Rear Brake excessively binding |1.2.1 |f|| | 2 |
| Direction indicators not working |1.5.1c| | 1 |
| Rear suspension fouling which affects the movement of the rear suspension |2.4.A.3a| | 1 |
| Footrest missing |6.2.1a| | 1 |
| Dipswitch does not deflect the main beam/s, making them into dipped beam/s |1.2.2b|ii|| | 1 |
| Offside Front Direction indicator damaged and function impaired |1.5.3a| | 1 |
| Horn control defective |1.7.2a| | 1 |
| Front Valve stem seriously damaged (5.2.3 (j)) | 1 |
| Rear Valve stem seriously damaged (5.2.3 (j)) | 1 |
| Rear Brake excessively binding (1.2.1 (f)) | 1 |
| Nearside Handlebar grip insecure to handlebar (2.2.1 (d) (ii)) | 1 |
| Offside Handlebar grip insecure to handlebar (2.2.1 (d) (ii)) | 1 |
| Handlebar fouling on the fuel tank or bodywork on full lock traps hand on full right lock (2.1.4 (b)) | 1 |
| All direction indicators adversely affected by the operation of another lamp integrated rear light ,indicators not far enough apart (4.4.3 (b)) | 1 |
| Shock absorber has negligible damping effect rear end does not return correctly when tested (5.3.2 (b)) | 1 |
| Rear Position lamp lens seriously defective (4.2.1 (b)) | 1 |
| Direction indicator adversely affected by the operation of another lamp both front (4.4.3 (b)) | 1 |
| Steering operation fouling on the fuel tank or bodywork on full lock (2.1.4 (b)) | 1 |
| Brake lever has inadequate reserve travel |3.1.3b| | 1 |
| Rear suspension component excessively bent |2.4.A.1a| | 1 |
| Rear Position lamp missing |4.2.1 |a|| | 1 |
| Rear Suspension arm pin or bush excessively worn |5.3.4 |a| |i|| | 1 |
| Central Rear Drive chain excessively tight, so that it is likely to fail |6.1.7 |k| |ii|| | 1 |
| Fuel system component leaking around in line filter |7.2.1a| | 1 |
| Drive chain excessively tight (6.1.7 (k) (i)) | 1 |
| Suspension arm ball joint excessively worn rear swinging arm play (5.3.4 (a) (i)) | 1 |
| Front Brake excessively binding |1.2.1 |f|| | 1 |
| Indicator tell tale not functioning |1.5.2| | 1 |
| Horn not working (7.7 (a)) | 1 |
| Headlamp insecure (4.1.1 (c)) | 1 |
| Rear Stop lamp does not illuminate by the operation of both brake controls Foot control (4.3.2 (a) (iii)) | 1 |
| Nearside Rear Direction indicator not working (4.4.1 (a) (ii)) | 1 |
| Central Rear Lower Shock absorber likely to become detached securing nut missing bolt loose (5.3.2 (a) (ii)) | 1 |
| Central Rear Lower Suspension attachment bracket/mounting insecure securing nut missing (5.3.3 (a) (i)) | 1 |
| Rear Drive chain excessively tight, so that it is likely to fail (6.1.7 (k) (ii)) | 1 |
| Rear Drive chain worn to excess (6.1.7 (c) (i)) | 1 |
| Rear Brake effort inadequate at a wheel (1.2.1 (a) (i)) | 1 |
| Rear Brake disc fractured cracked (1.1.14 (a) (ii)) | 1 |
| Front Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
| Rear Roller brake test indicates brake effort rise disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
| Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
| Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
| Nearside Front Shock absorber has a serious fluid leak |5.3.2 |b|| | 1 |
| Front Headlamp aim so that beam "kick up" is not visible on the screen |4.1.2 |a|| | 1 |
| Front Valve stem seriously damaged |5.2.3 |j|| | 1 |
| Front Brake hose damaged and likely to fail Insecure and been crushed |1.1.12 |a|| | 1 |
| Nearside Front Wheel fixing missing |multiple fixings| Pinch bolt missing |5.2.1 |a| |i|| | 1 |
| Nearside Front Lower Roller brake test indicates a binding brake |3.3.A1a| | 1 |
| Nearside Rear Drive chain worn to excess |6.2.1e| | 1 |
| Rear Brake indicates excessive fluctuation of brake effort (1.2.1 (e)) | 1 |
| Rear Stop lamp not working with front brake lever (4.3.1 (a) (ii)) | 1 |
| Lower Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
| Exhaust markings indicating not for road use or similar wording |7.1.4| | 1 |
| Rear Brake component worn and seriously reduced in strength |3.2.A1| | 1 |
| Front Headlamp aim headlamp deteriorated and function impaired |1.2.3a| | 1 |
| Rear Rear reflector on motorcycle missing |1.4.1| | 1 |
| Offside Front Position lamp switch insecure |1.1.4b| | 1 |
| Headlamp not working on main beam (4.1.1 (a) (ii)) | 1 |
| Drive chain horseshoe locking device likely to become detached (6.1.7 (j) (ii)) | 1 |
| Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition (8.1.1 (a)) | 1 |
| Front Brake excessively binding (1.2.1 (f)) | 1 |
| Fuel system component leaking excessively or a risk of fire (6.1.3 (b) (ii)) | 1 |
| Front Rear reflector on motorcycle missing missing |1.4.1| | 1 |
| Rear Direction indicators not working both |1.5.1c| | 1 |
| Brake excessively binding (1.2.1 (f)) | 1 |
| Steering operation impeded by a fairing (2.1.4 (e)) | 1 |
| Rear Lower Suspension rod likely to fail linkage bolt fouling on exhaust pipe, restricting movement. (5.3.3 (b) (ii)) | 1 |
| Rear Drive chain worn to excess |6.2.1e| | 1 |
| Rear Stop lamp does not emit a steady light |1.3.1b| | 1 |
| Brake component has an inadequate repair |3.1.5| | 1 |
| Front Roller brake test indicates brake effort rise disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
| Front suspension has excessive stiffness in the suspension movement. front forks solid |2.3.6b| | 1 |
| Rear suspension movement is excessively stiff |2.4.A.3b| | 1 |
| Brake caliper|s| insecure Rubber mounting bushes missing |3.2.A1j| | 1 |
| Front Brake component has an inadequate repair |3.1.5| | 1 |
| Offside Fairing so located that it is likely to impede the steering |2.1.2e| | 1 |
| Stop lamp remains on when the brake is released Stays on all of the time |1.3.1e| | 1 |
| Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
| Steering lock stop maladjusted |2.1.3| | 1 |
| Brake lever mounting cracked |3.1.2c| | 1 |
| Nearside Rear Direction indicator damaged and function impaired |1.5.3a| | 1 |
| Fuel hose leaking |7.2.1a| | 1 |
| Front Stop lamp not working |4.3.1 |a| |ii|| | 1 |
| Direction indicator flashing more than 120 times per minute |1.5.1c| | 1 |
| Nearside Rear Direction indicator not working |4.4.1 |a| |ii|| | 1 |
| Stop lamp not working |4.3.1 |a| |ii|| | 1 |
| Throttle control functioning such that safe operation of the motorcycle is adversely affected not releasing |6.2.7 |a| |ii|| | 1 |
| Rear Shock absorber has negligible damping effect |5.3.2 |b|| | 1 |
| Front Shock absorber has negligible damping effect no resistance |5.3.2 |b|| | 1 |
| Rear brake disc in such a condition that it is seriously weakened | 1 |
| Plate brake test The less effective brake control does not achieve an efficiency of 25% |1.2.2 |a| |i|| | 1 |
| Nearside Handlebar mounting clamp bolt loose |2.1.1a| | 1 |
| Rear Wheel alignment incorrect which adversely affects the handling |2.4 |a|| | 1 |
| Front Brake caliper|s| securing bolt|s| missing |3.2.A1j| | 1 |
| Rear Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
| Rear Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
| Centre Motorcycle structure insecure and likely to affect the correct functioning of the steering or braking |6.1.1c| | 1 |
| Front suspension fouling which affects the movement of the front suspension. |2.3.6a| | 1 |
| Centre Lower Exhaust mounting missing bolt missing |7.1.1c| | 1 |
| Front Brake master cylinder leaking hydraulic fluid |3.2.B1e| | 1 |
| Nearside Front Indicator tell tale not functioning |1.5.2| | 1 |
| Position lamp adversely affected by the operation of another lamp Rear light has combined LED type indicators - half of light not illuminated when indicating (4.2.3 (b)) | 1 |
| Rear Direction indicator obviously incorrectly positioned Rear indicators combined in to rear light & to close together (4.4.3 (a)) | 1 |
| Rear Brake disc fractured Has cracks going to outside edge (1.1.14 (a) (ii)) | 1 |
| Front Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 1 |
| Offside Front Direction indicator not working |4.4.1 |a| |ii|| | 1 |
| Offside Front Direction indicator missing |4.4.1 |a| |ii|| | 1 |
| Handlebar so insecure it is likely to become detached |2.2.1 |b| |ii|| | 1 |
| Steering operation fouling on the fuel tank or bodywork on full lock |2.1.4 |b|| | 1 |
| Front Roller brake test indicates a severely grabbing brake |3.3.A1b| | 1 |
| Front Brake hose excessively stretched (1.1.12 (b) (ii)) | 1 |
| Rear Brake caliper inadequately mounted nut missing from slider (1.1.16 (c) (i)) | 1 |
| Offside Front Indicator switch insecure |1.5.4| | 1 |
| Nearside Front Steering control has Insufficient clearance at full lock affecting the riders grasp of handlebars |2.1.2b| | 1 |
| Nearside Front suspension has inadequate damping effect. |2.3.6c| | 1 |
| Offside Front suspension has inadequate damping effect. |2.3.6c| | 1 |
| Offside Front Steering control fouling between components which interferes with the free movement of the steering |2.1.2a| | 1 |
| Offside Front Fairing so located that it is likely to impede the steering |2.1.2e| | 1 |
| Nearside Front Direction indicator damaged and function impaired |1.5.3a| | 1 |
| Offside Rear Lower Brake pipe likely to be fouled or trapped by moving parts |3.2.B2c| | 1 |
| Motorcycle structure joining/attachment plate or fastening so insecure that structural rigidity is seriously reduced (6.1.1 (b) (ii)) | 1 |
| Rear wheel bearings are excessively rough |2.4.A.2c| | 1 |
| Brake pedal cannot be applied smoothly |3.1.3d| | 1 |
| Rear Floor brake test indicates a binding brake |3.3.C2c| | 1 |
| Rear Brake disc|s| cracked |3.2.A1g| | 1 |
| Front Brake fluid significantly below minimum mark on front brake |1.1.10 |d| |ii|| | 1 |
| Fuel cap ineffective unable to check fuel system |6.1.3 |b| |i|| | 1 |
| All position lamps adversely affected by the operation of another lamp |1.1.3b| | 1 |
| Handlebar mounting clamp bolt loose |2.1.1a| | 1 |
| Throttle operating incorrectly switch / throttle not secured to handle bar |6.2.1f| | 1 |
| Nearside Rear Direction indicator not working |1.5.1c| | 1 |
| Front wheel has a loose wheel nut|s| |4.2.3a| | 1 |
| Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 1 |
| Fairing so located that it is likely to impede the steering clutch lever fouling fairing on full lock |2.1.2e| | 1 |
| Fairing so located that it is likely to impede the steering front brake lever fouling fairing on full lock |2.1.2e| | 1 |
| Fairing so located that it is likely to impede the steering front brake fluid reservoir fouling fairing on full lock |2.1.2e| | 1 |
| Nearside Handlebar mounting clamp bolt missing |2.1.1a| | 1 |
| Offside Rear Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
| Exhaust excessively deteriorated |7.1.1a| | 1 |
| Brake pedal insecure |3.1.2a| | 1 |
| Direction indicators not working all missing |1.5.1c| | 1 |
| Front Wheel bearing rough when rotated |5.1.3 |b| |i|| | 1 |
| Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
| Clutch lever shortened so it cannot be readily operated. |6.2.1g| | 1 |
| Brake lever is damaged and the brake cannot be readily applied |3.1.3c| | 1 |
| Steering lock stop ineffective |2.1.3| | 1 |
| Handlebar mounting clamp bolt missing |2.1.1a| | 1 |
| Offside Front Wheel has an excessively distorted bead rim. |4.2.2| | 1 |
| Brake lever mounting insecure |3.1.2a| | 1 |
| Front Brake lever cannot be applied smoothly |3.1.3d| | 1 |
| Nearside Front Direction indicator insecure |1.5.3b| | 1 |
| Steering control has Insufficient clearance at full lock affecting the riders grasp of handlebars |2.1.2b| | 1 |
| Rear Brake caliper|s| insecure |3.2.A1j| | 1 |
| Horn control not functioning. |1.7.2b| | 1 |
| Front Horn not working |1.7.3a| | 1 |
| Wheel alignment incorrect which adversely affects the handling (2.4 (a)) | 1 |
| Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 1 |
| Nearside Rear Direction indicator missing |1.5.1a| | 1 |
| Offside Rear Direction indicator missing |1.5.1a| | 1 |
| Offside Front Direction indicator missing |1.5.1a| | 1 |
| Rear Stop lamp remains on when the brake is released |1.3.1e| | 1 |
| Nearside Front Floor brake test indicates a binding brake |3.3.C2c| | 1 |
| Offside Rear Footrest insecure |6.2.1a| | 1 |
| Centre Exhaust mounting missing |7.1.1c| | 1 |
| Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
| Rear Drive chain worn to excess (6.2.1e) | 1 |
| Decelerometer brake test indicates a binding brake (3.3.E1d) | 1 |
| Rear Stop lamp remains on when the brake is released (1.3.1e) | 1 |
| Offside Rear Direction indicator not working (4.4.1 (a) (ii)) | 1 |
| Rear Rear reflector missing (4.8.2 (a) (ii)) | 1 |
| Offside Handlebar mounting clamp loose |2.1.1a| | 1 |
| Offside Front Direction indicator insecure |1.5.3b| | 1 |
| Stop lamp deteriorated and function impaired |1.3.3a| | 1 |
| Nearside Footrest insecure |6.2.1a| | 1 |
| Steering operation fouling on the fuel tank or bodywork on full lock clutch lever (2.1.4 (b)) | 1 |
| Rear Exhaust has a major leak of exhaust gases (6.1.2 (a)) | 1 |
| Offside Front Direction indicator obviously incorrectly positioned (4.4.3 (a)) | 1 |
| Throttle control functioning such that safe operation of the motorcycle is adversely affected revs when turning (6.2.7 (a) (ii)) | 1 |
| Offside Rear Direction indicators not working |1.5.1c| | 1 |
| Direction indicator missing none fitted |1.5.1a| | 1 |
| Steering movement excessively stiff with the weight on the lower bearing |2.2.1a| | 1 |
| Offside Footrest insecure |6.2.1a| | 1 |
| Brake pedal is damaged and the brake cannot be readily applied |3.1.3c| | 1 |
| Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
| Handlebar deformed |2.1.1b| | 1 |
| Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition |8.1.1 |a|| | 1 |
| Headlamp not working on dipped beam |4.1.1 |a| |ii|| | 1 |
| Rear Brake caliper insecure |1.1.16 |c| |i|| | 1 |
| Rear reflector missing |4.8.2 |a| |ii|| | 1 |
| Offside Handlebar so insecure it is likely to become detached |2.2.1 |b| |ii|| | 1 |
| Shock absorber insecurely attached rear shock absorber top mounting bolt insecure |5.3.2 |a| |i|| | 1 |
| Stop lamp not working x2 (4.3.1 (a) (ii)) | 1 |
| Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 1 |
| Front Brake lever insecure pivot bolt lock nut missing (1.1.2 (e) (i)) | 1 |
| Stop lamp does not illuminate immediately a brake applies from front brake |1.3.1a| | 1 |
| Steering control handlebar movement restricted by cables caught on a projection |2.1.2c| | 1 |
| Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
| Footrest insecure right hand drivers footrest mounting bracket is cracked. |6.2.1a| | 1 |
| Footrest missing left hand rear pillion footrest is missing |6.2.1a| | 1 |
| Central Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
| Rear Brake pedal so insecure that the brake cannot be readily applied (1.1.2 (e) (ii)) | 1 |
| Front Stop lamp does not illuminate by the operation of both brake controls Switch n/w (4.3.2 (a) (iii)) | 1 |
| Offside Footrest missing (6.2.12 (a)) | 1 |
| Exhaust silencer insecure (8.1.1 (b) (i)) | 1 |
| Front suspension assembly component loose |2.3.1| | 1 |
| Horn not loud enough to be heard by another road user |1.7.3a| | 1 |
| Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
| Brake hose damaged | 1 |
| Rear Plate brake test indicates a binding brake |3.3.B1a| | 1 |
| Front Brake performance not tested |3.3| | 1 |
| Drive chain so worn it is likely to fail |6.1.7 |c| |ii|| | 1 |
| Drive chain so loose it is likely to fail |6.1.7 |c| |ii|| | 1 |
| Brake pedal not releasing correctly and functionality of brakes affected control 2 |1.1.2 |b| |ii|| | 1 |
| Offside Front Shock absorber has a serious fluid leak |5.3.2 |b|| | 1 |
| Stop lamp not working does not work all the time |4.3.1 |a| |ii|| | 1 |
| Pillion seat with a defective supporting structure no strap |6.2.6 |a| |i|| | 1 |