MOT History from tests of petrol HYOSUNG GTs year 2008

Review the list of common HYOSUNG GT failures below or to perform a specific mot history check on your HYOSUNG then use our popular KnowYourCar service

mot history

Pass percent:62.58%

(The average a petrol HYOSUNG GT year 2008 passes without issue)

Based on:954 MOT Tests

Most common failures	No# failures
Headlamp aim out of alignment	57
Drive chain excessively loose \|6.2.1d\|	39
Rear reflector on motorcycle missing \|1.4.1\|	23
Rear Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	23
Front Roller brake test indicates a binding brake \|3.3.A1a\|	21
Front Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	20
Drive chain worn to excess \|6.2.1e\|	18
Rear Drive chain sprocket worn to excess \|6.2.1e\|	14
Roller brake test The less effective brake control does not achieve an efficiency of 25%. \|3.3.A2b\|	14
Horn not working \|1.7.3a\|	13
Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	13
Drive chain excessively tight \|6.2.1d\|	11
Rear Roller brake test indicates a binding brake \|3.3.A1a\|	11
Registration plate issues	10
Registration plate lamp issues	10
Offside Front shock absorber seal failed and leaking oil \|2.3.3\|	9
Drive chain excessively loose (6.1.7 (c) (i))	9
Nearside Front shock absorber seal failed and leaking oil \|2.3.3\|	9
Rear wheel bearings have excessive free play \|2.4.A.2c\|	8
Rear Brake disc\|s\| cracked \|3.2.A1g\|	7
Rear shock absorber has inadequate damping effect. \|2.4.A.3b\|	7
Exhaust is leaking and excessively noisey \|7.1.1b\|	7
Rear Roller brake test indicates a sticking brake \|3.3.A1a\|	7
Headlamp at least one does not illuminate on main beam \|1.2.2a\|ii\|\|	7
Nearside Rear Footrest missing \|6.2.1a\|	7
Nearside Front Direction indicator not working \|1.5.1c\|	6
Front Drive chain sprocket worn to excess \|6.2.1e\|	6
Front suspension has inadequate damping effect. \|2.3.6c\|	6
Rear position lamp does not illuminate immediately when it is switched on \|1.1.3a\|	6
Offside Rear Footrest missing \|6.2.1a\|	6
Stop lamp remains on when the brake is released \|1.3.1e\|	5
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition \|7.1.2\|	5
Drive chain worn to excess (6.1.7 (c) (i))	5
Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b))	5
Nearside Front Direction indicators not working \|1.5.1c\|	5
Offside Front Direction indicators not working \|1.5.1c\|	5
Locking device\|s\| not correctly fitted which may make the motor bicycle dangerous to ride \|6.2.1h\|	5
Front wheel bearings have excessive free play \|2.3.5b\|	5
Front Stop lamp remains on when the brake is released \|1.3.1e\|	4
Front Stop lamp not working (4.3.1 (a) (ii))	4
Wheel alignment incorrect which adversely affects the handling \|2.5.1\|	4
Direction indicators flashing more than 120 times per minute \|1.5.1c\|	4
Steering control fouling between components which interferes with the free movement of the steering \|2.1.2a\|	4
Rear Footrest missing \|6.2.1a\|	4
Front position lamp does not illuminate immediately when switched on \|1.1.3a\|	4
Headlamp switch faulty \|1.2.4\|	4
Rear Brake excessively binding (1.2.1 (f))	3
Throttle has a significant change in engine speed whilst moving the steering from lock to lock \|2.1.4\|	3
Rear Drive chain excessively loose \|6.2.1d\|	3
Rear Brake disc\|s\| excessively worn \|3.2.A1l\|	3
Rear Shock absorber has negligible damping effect (5.3.2 (b))	3
Stop lamp remains on when the brakes are released	3
Front Roller brake test indicates a sticking brake \|3.3.A1a\|	3
Rear Stop lamp remains on when the brake is released \|1.3.1e\|	3
Nearside Handlebar deformed \|2.1.1b\|	3
Nearside Steering control has Insufficient clearance at full lock affecting the riders grasp of handlebars \|2.1.2b\|	3
Offside Front Direction indicator not working \|1.5.1c\|	3
Headlamp at least one does not illuminate on dipped beam \|1.2.2a\|i\|\|	3
Exhaust has a major leak of exhaust gases (6.1.2 (a))	3
Front Front shock absorber seal failed and leaking oil \|2.3.3\|	3
Rear suspension movement is excessively stiff \|2.4.A.3b\|	3
Front Brake excessively binding (1.2.1 (f))	3
Front Shock absorber has a serious fluid leak (5.3.2 (b))	2
Rear Rear reflector on motorcycle missing \|1.4.1\|	2
Rear Drive chain worn to excess \|6.2.1e\|	2
Front Front suspension has inadequate damping effect. \|2.3.6c\|	2
Front Valve stem seriously damaged (5.2.3 (j))	2
Front Brake fluid reservoir fluid level dangerously low \|3.2.B1d\|	2
Rear Floor brake test indicates a sticking brake \|3.3.C2c\|	2
Nearside Rear Direction indicators not working \|1.5.1c\|	2
Offside Rear Direction indicators not working \|1.5.1c\|	2
Nearside Rear Direction indicator flashing more than 120 times per minute \|1.5.1c\|	2
Offside Rear Direction indicator not working \|1.5.1c\|	2
Direction indicator not working \|1.5.1c\|	2
Wheel alignment incorrect which adversely affects the handling \|2.4 \|a\|\|	2
Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i))	2
Front Shock absorber has negligible damping effect (5.3.2 (b))	2
Headlamp aim projected beam image obviously incorrect (4.1.2 (c))	2
Steering operation restricted in free movement from lock to lock (2.1.4 (c))	2
Fairing so located that it is likely to impede the steering \|2.1.2e\|	2
Brake lever has inadequate reserve travel \|3.1.3b\|	2
Nearside Direction indicator flashing more than 120 times per minute \|1.5.1c\|	2
Front shock absorber seal failed and leaking oil \|2.3.3\|	2
Rear Floor brake test indicates a binding brake \|3.3.C2c\|	2
Nearside Front Direction indicator incorrect colour \|1.5.1b\|	2
Front Plate brake test indicates a binding brake \|3.3.B1a\|	2
Offside Front Front shock absorber seal failed and leaking oil \|2.3.3\|	2
Front Brake disc\|s\| securing bolt\|s\| missing \|3.2.A1g\|	2
Handlebar mounting insecure (2.2.1 (a) (i))	2
Horn not working (7.7 (a))	2
Front Stop lamp does not illuminate by the operation of both brake controls (4.3.2 (a) (iii))	2
Offside Front Steering operation fouling on the fuel tank or bodywork on full lock \|2.1.4 \|b\|\|	2
Clutch lever positioned so it cannot be readily operated. \|6.2.1g\|	2
Headlamp aim not tested (4.1.2 (b))	2
Headlamp not working on dipped beam (4.1.1 (a) (ii))	2
Exhaust excessively deteriorated \|7.1.1a\|	2
Front Gradient brake test indicates a sticking brake \|3.3.D1c\|	2
Rear Brake disc\|s\| excessively scored \|3.2.A1l\|	2
Roller brake test The less effective brake control does not achieve an efficiency of 25% \|1.2.2 \|a\| \|i\|\|	2
Nearside Handlebar grip insecure to handlebar (2.2.1 (d) (ii))	2
Front Position lamp not working (4.2.1 (a))	2
Rear Stop lamp not working (4.3.1 (a) (ii))	2
Offside Rear Direction indicators flashing more than 120 times per minute \|1.5.1c\|	2
Offside Front Shock absorber has a serious fluid leak \|5.3.2 \|b\|\|	2
Rear Wheel alignment incorrect which adversely affects the handling \|2.5.1\|	2
Brake hose damaged	2
Chain guard insecure \|6.2.1c\|	2
Nearside Front Direction indicator insecure \|1.5.3b\|	2
Exhaust mounting does not fully support the exhaust system \|7.1.1.c\|	2
Steering movement excessively stiff with the wheel raised \|2.2.1b\|	2
Rear brake disc in such a condition that it is seriously weakened	2
Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition (8.1.1 (a))	2
Rear Roller brake test indicates brake effort rise disproportional to brake lever or pedal effort \|3.3.A1c\|	2
Headlamp light intensity severely reduced (4.1.4 (a))	2
Offside Front Direction indicator insecure \|1.5.3b\|	2
Offside Front Footrest insecure \|6.2.1a\|	2
Offside Front Direction indicator damaged and function impaired \|1.5.3a\|	2
Rear Brake pedal is inoperative \|3.1.3c\|	2
Rear Rear suspension movement is excessively stiff \|2.4.A.3b\|	2
Nearside Front Shock absorber has a serious fluid leak \|5.3.2 \|b\|\|	2
Rear Position lamp not working \|4.2.1 \|a\|\|	2
Nearside Front Front shock absorber seal failed and leaking oil \|2.3.3\|	2
Locking devices not correctly fitted which may make the motor bicycle dangerous to ride \|6.2.1h\|	2
Rear Brake fluid reservoir fluid level dangerously low \|3.2.B1d\|	2
Stop lamp does not illuminate by the operation of both brake controls (4.3.2 (a) (iii))	2
Offside Rear Footrest missing (6.2.12 (a))	2
Rear suspension fouling which affects the movement of the rear suspension \|2.4.A.3a\|	2
Headlamp aim headlamp damaged and function impaired \|1.2.3a\|	2
Front wheel bearings are excessively rough \|2.3.5b\|	2

We get to these numbers by trawling through over 1 billion MOT test results since 2004 and crunched the numbers. We remove anything to do with Tyres, as they are model independent and group together common non-model specific issues. We are trying to get to a picture of what models have what issues.

Please note: We take the data from the DVSA. This data is raw and can contain typos and spelling mistakes that garages may have entered while recording a MOT result. Specifically miss-match on names of models and makes. We are constantly cleaning the data so bear with the odd issue.

Got suggestions? We’re improving this section all the time. If you have any suggestions, please let us know.

Most common failures	No# failures
Headlamp aim out of alignment	57
Drive chain excessively loose \|6.2.1d\|	39
Rear reflector on motorcycle missing \|1.4.1\|	23
Rear Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	23
Front Roller brake test indicates a binding brake \|3.3.A1a\|	21
Front Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	20
Drive chain worn to excess \|6.2.1e\|	18
Rear Drive chain sprocket worn to excess \|6.2.1e\|	14
Roller brake test The less effective brake control does not achieve an efficiency of 25%. \|3.3.A2b\|	14
Horn not working \|1.7.3a\|	13
Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	13
Drive chain excessively tight \|6.2.1d\|	11
Rear Roller brake test indicates a binding brake \|3.3.A1a\|	11
Registration plate issues	10
Registration plate lamp issues	10
Offside Front shock absorber seal failed and leaking oil \|2.3.3\|	9
Drive chain excessively loose (6.1.7 (c) (i))	9
Nearside Front shock absorber seal failed and leaking oil \|2.3.3\|	9
Rear wheel bearings have excessive free play \|2.4.A.2c\|	8
Rear Brake disc\|s\| cracked \|3.2.A1g\|	7
Rear shock absorber has inadequate damping effect. \|2.4.A.3b\|	7
Exhaust is leaking and excessively noisey \|7.1.1b\|	7
Rear Roller brake test indicates a sticking brake \|3.3.A1a\|	7
Headlamp at least one does not illuminate on main beam \|1.2.2a\|ii\|\|	7
Nearside Rear Footrest missing \|6.2.1a\|	7
Nearside Front Direction indicator not working \|1.5.1c\|	6
Front Drive chain sprocket worn to excess \|6.2.1e\|	6
Front suspension has inadequate damping effect. \|2.3.6c\|	6
Rear position lamp does not illuminate immediately when it is switched on \|1.1.3a\|	6
Offside Rear Footrest missing \|6.2.1a\|	6
Stop lamp remains on when the brake is released \|1.3.1e\|	5
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition \|7.1.2\|	5
Drive chain worn to excess (6.1.7 (c) (i))	5
Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b))	5
Nearside Front Direction indicators not working \|1.5.1c\|	5
Offside Front Direction indicators not working \|1.5.1c\|	5
Locking device\|s\| not correctly fitted which may make the motor bicycle dangerous to ride \|6.2.1h\|	5
Front wheel bearings have excessive free play \|2.3.5b\|	5
Front Stop lamp remains on when the brake is released \|1.3.1e\|	4
Front Stop lamp not working (4.3.1 (a) (ii))	4
Wheel alignment incorrect which adversely affects the handling \|2.5.1\|	4
Direction indicators flashing more than 120 times per minute \|1.5.1c\|	4
Steering control fouling between components which interferes with the free movement of the steering \|2.1.2a\|	4
Rear Footrest missing \|6.2.1a\|	4
Front position lamp does not illuminate immediately when switched on \|1.1.3a\|	4
Headlamp switch faulty \|1.2.4\|	4
Rear Brake excessively binding (1.2.1 (f))	3
Throttle has a significant change in engine speed whilst moving the steering from lock to lock \|2.1.4\|	3
Rear Drive chain excessively loose \|6.2.1d\|	3
Rear Brake disc\|s\| excessively worn \|3.2.A1l\|	3
Rear Shock absorber has negligible damping effect (5.3.2 (b))	3
Stop lamp remains on when the brakes are released	3
Front Roller brake test indicates a sticking brake \|3.3.A1a\|	3
Rear Stop lamp remains on when the brake is released \|1.3.1e\|	3
Nearside Handlebar deformed \|2.1.1b\|	3
Nearside Steering control has Insufficient clearance at full lock affecting the riders grasp of handlebars \|2.1.2b\|	3
Offside Front Direction indicator not working \|1.5.1c\|	3
Headlamp at least one does not illuminate on dipped beam \|1.2.2a\|i\|\|	3
Exhaust has a major leak of exhaust gases (6.1.2 (a))	3
Front Front shock absorber seal failed and leaking oil \|2.3.3\|	3
Rear suspension movement is excessively stiff \|2.4.A.3b\|	3
Front Brake excessively binding (1.2.1 (f))	3
Front Shock absorber has a serious fluid leak (5.3.2 (b))	2
Rear Rear reflector on motorcycle missing \|1.4.1\|	2
Rear Drive chain worn to excess \|6.2.1e\|	2
Front Front suspension has inadequate damping effect. \|2.3.6c\|	2
Front Valve stem seriously damaged (5.2.3 (j))	2
Front Brake fluid reservoir fluid level dangerously low \|3.2.B1d\|	2
Rear Floor brake test indicates a sticking brake \|3.3.C2c\|	2
Nearside Rear Direction indicators not working \|1.5.1c\|	2
Offside Rear Direction indicators not working \|1.5.1c\|	2
Nearside Rear Direction indicator flashing more than 120 times per minute \|1.5.1c\|	2
Offside Rear Direction indicator not working \|1.5.1c\|	2
Direction indicator not working \|1.5.1c\|	2
Wheel alignment incorrect which adversely affects the handling \|2.4 \|a\|\|	2
Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i))	2
Front Shock absorber has negligible damping effect (5.3.2 (b))	2
Headlamp aim projected beam image obviously incorrect (4.1.2 (c))	2
Steering operation restricted in free movement from lock to lock (2.1.4 (c))	2
Fairing so located that it is likely to impede the steering \|2.1.2e\|	2
Brake lever has inadequate reserve travel \|3.1.3b\|	2
Nearside Direction indicator flashing more than 120 times per minute \|1.5.1c\|	2
Front shock absorber seal failed and leaking oil \|2.3.3\|	2
Rear Floor brake test indicates a binding brake \|3.3.C2c\|	2
Nearside Front Direction indicator incorrect colour \|1.5.1b\|	2
Front Plate brake test indicates a binding brake \|3.3.B1a\|	2
Offside Front Front shock absorber seal failed and leaking oil \|2.3.3\|	2
Front Brake disc\|s\| securing bolt\|s\| missing \|3.2.A1g\|	2
Handlebar mounting insecure (2.2.1 (a) (i))	2
Horn not working (7.7 (a))	2
Front Stop lamp does not illuminate by the operation of both brake controls (4.3.2 (a) (iii))	2
Offside Front Steering operation fouling on the fuel tank or bodywork on full lock \|2.1.4 \|b\|\|	2
Clutch lever positioned so it cannot be readily operated. \|6.2.1g\|	2
Headlamp aim not tested (4.1.2 (b))	2
Headlamp not working on dipped beam (4.1.1 (a) (ii))	2
Exhaust excessively deteriorated \|7.1.1a\|	2
Front Gradient brake test indicates a sticking brake \|3.3.D1c\|	2
Rear Brake disc\|s\| excessively scored \|3.2.A1l\|	2
Roller brake test The less effective brake control does not achieve an efficiency of 25% \|1.2.2 \|a\| \|i\|\|	2
Nearside Handlebar grip insecure to handlebar (2.2.1 (d) (ii))	2
Front Position lamp not working (4.2.1 (a))	2
Rear Stop lamp not working (4.3.1 (a) (ii))	2
Offside Rear Direction indicators flashing more than 120 times per minute \|1.5.1c\|	2
Offside Front Shock absorber has a serious fluid leak \|5.3.2 \|b\|\|	2
Rear Wheel alignment incorrect which adversely affects the handling \|2.5.1\|	2
Brake hose damaged	2
Chain guard insecure \|6.2.1c\|	2
Nearside Front Direction indicator insecure \|1.5.3b\|	2
Exhaust mounting does not fully support the exhaust system \|7.1.1.c\|	2
Steering movement excessively stiff with the wheel raised \|2.2.1b\|	2
Rear brake disc in such a condition that it is seriously weakened	2
Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition (8.1.1 (a))	2
Rear Roller brake test indicates brake effort rise disproportional to brake lever or pedal effort \|3.3.A1c\|	2
Headlamp light intensity severely reduced (4.1.4 (a))	2
Offside Front Direction indicator insecure \|1.5.3b\|	2
Offside Front Footrest insecure \|6.2.1a\|	2
Offside Front Direction indicator damaged and function impaired \|1.5.3a\|	2
Rear Brake pedal is inoperative \|3.1.3c\|	2
Rear Rear suspension movement is excessively stiff \|2.4.A.3b\|	2
Nearside Front Shock absorber has a serious fluid leak \|5.3.2 \|b\|\|	2
Rear Position lamp not working \|4.2.1 \|a\|\|	2
Nearside Front Front shock absorber seal failed and leaking oil \|2.3.3\|	2
Locking devices not correctly fitted which may make the motor bicycle dangerous to ride \|6.2.1h\|	2
Rear Brake fluid reservoir fluid level dangerously low \|3.2.B1d\|	2
Stop lamp does not illuminate by the operation of both brake controls (4.3.2 (a) (iii))	2
Offside Rear Footrest missing (6.2.12 (a))	2
Rear suspension fouling which affects the movement of the rear suspension \|2.4.A.3a\|	2
Headlamp aim headlamp damaged and function impaired \|1.2.3a\|	2
Front wheel bearings are excessively rough \|2.3.5b\|	2

MOT History from tests of petrol HYOSUNG GTs year 2008

Find us on Facebook