Most common failures | No# failures |
---|
Headlamp aim out of alignment | 34 |
Drive chain excessively loose |6.2.1d| | 19 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 17 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 13 |
Rear Roller brake test indicates a binding brake |3.3.A1a| | 11 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 11 |
Drive chain worn to excess |6.2.1e| | 9 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 8 |
Rear reflector on motorcycle missing |1.4.1| | 8 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 8 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 8 |
Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 7 |
Horn not working |1.7.3a| | 7 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 7 |
Front Floor brake test indicates a binding brake |3.3.C2c| | 6 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 6 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 6 |
Registration plate issues | 5 |
Rear Drive chain sprocket worn to excess |6.2.1e| | 5 |
Exhaust is leaking and excessively noisey |7.1.1b| | 5 |
Drive chain excessively tight |6.2.1d| | 5 |
Throttle operating incorrectly |6.2.1f| | 4 |
Headlamp insecure |1.2.3b| | 4 |
Front wheel bearings have excessive free play |2.3.5b| | 4 |
Front Brake disc|s| excessively worn |3.2.A1l| | 4 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 4 |
Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 4 |
Front Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 3 |
Rear suspension bush has excessive free play |2.4.A2a|i|| | 3 |
Wheel alignment incorrect which adversely affects the steering |2.5.1| | 3 |
Rear Rear wheel bearings have excessive free play |2.4.A.2c| | 3 |
Front Stop lamp remains on when the brake is released |1.3.1e| | 3 |
Exhaust excessively deteriorated |7.1.1a| | 3 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 3 |
Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 3 |
Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 3 |
Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 3 |
Headlamp aim beam image kick up to the offside |1.6| | 3 |
Rear Brake disc|s| excessively worn |3.2.A1l| | 3 |
Nearside Rear Direction indicator not working |1.5.1c| | 3 |
Front position lamp incorrect colour |1.1.2a| | 3 |
Nearside Front Footrest insecure |6.2.1a| | 3 |
Steering headbearing has excessive wear or free play (2.2.2 (f) (i)) | 3 |
Front suspension has inadequate damping effect. |2.3.6c| | 3 |
Front wheel bearings are excessively rough |2.3.5b| | 2 |
Brake hose damaged | 2 |
Headlamp switch faulty |1.2.4| | 2 |
Rear Floor brake test indicates a sticking brake |3.3.C2c| | 2 |
Headlamp main beam affected by the operation of another lamp |1.2.2c| | 2 |
Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 2 |
Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 2 |
Front Drive chain sprocket worn to excess |6.2.1e| | 2 |
Front Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Fuel system component insecure |7.2.1b| | 2 |
Roller brake test No brake control achieves an efficiency of 30%. |3.3.A2a| | 2 |
Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 2 |
Indicator switch insecure |1.5.4| | 2 |
Rear wheel bearings are excessively rough |2.4.A.2c| | 2 |
Wheel alignment incorrect which adversely affects the handling |2.5.1| | 2 |
Rear Footrest missing |6.2.1a| | 2 |
Rear Brake indicates excessive fluctuation of brake effort (1.2.1 (e)) | 2 |
Front Steering headbearing has excessive free play |2.2.2| | 2 |
Nearside Rear Footrest insecure |6.2.1a| | 2 |
Offside Rear Footrest insecure |6.2.1a| | 2 |
Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 2 |
Rear Drive chain worn to excess |6.2.1e| | 2 |
Nearside Rear Direction indicator incorrect colour |1.5.1b| | 1 |
Offside Rear Direction indicator incorrect colour |1.5.1b| | 1 |
Nearside Steering control has Insufficient clearance at full lock affecting the riders grasp of handlebars |2.1.2b| | 1 |
Centre Rear Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Centre Rear Lower Motorcycle structure excessively corroded |6.1.1a| | 1 |
Front Roller brake test indicates a sticking brake |3.3.A1a| | 1 |
Front suspension assembly excessive wear or free play in a front suspension component |2.3.4| | 1 |
Rear Direction indicator incorrect colour |1.5.1b| | 1 |
Steering movement excessively stiff with the weight on the lower bearing |2.2.1a| | 1 |
Centre Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Centre Exhaust excessively deteriorated |7.1.1a| | 1 |
Front Floor brake test indicates a sticking brake |3.3.C2c| | 1 |
Headlamp dipped beam affected by the operation of another lamp |1.2.2c| | 1 |
Front Direction indicator missing |1.5.1a| | 1 |
Rear Direction indicator missing |1.5.1a| | 1 |
Stop lamp insecure |1.3.3b| | 1 |
Offside Front Roller brake test indicates a binding brake |3.3.A1a| | 1 |
Offside Rear Roller brake test indicates a binding brake |3.3.A1a| | 1 |
Offside Rear Direction indicators not working |1.5.1c| | 1 |
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 1 |
Rear Brake master cylinder leaking hydraulic fluid |3.2.B1e| | 1 |
Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 1 |
Front Direction indicator flashing more than 120 times per minute |1.5.1c| | 1 |
Chain guard insecure |6.2.1c| | 1 |
Floor brake test indicates a binding brake |3.3.C2c| | 1 |
Nearside Front wheel bearings are excessively rough |2.3.5b| | 1 |
Offside Front wheel bearings are excessively rough |2.3.5b| | 1 |
Rear Brake pipe excessively chafed |3.2.B2a| | 1 |
Front Brake disc|s| cracked |3.2.A1g| | 1 |
Nearside Rear Footrest missing |6.2.1a| | 1 |
Offside Rear Footrest missing |6.2.1a| | 1 |
Rear position lamp incorrect colour |1.1.2b| | 1 |
Rear Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
Stop lamp not working brake control 1 (4.3.1 (a) (ii)) | 1 |
Front Front suspension has inadequate damping effect. |2.3.6c| | 1 |
Rear wheel spindle securing nut locking device insecure |2.4.A.2b| | 1 |
Front Brake cylinder leaking hydraulic fluid |3.2.B1e| | 1 |
Nearside Indicator switch insecure |1.5.4| | 1 |
Offside Position lamp switch insecure |1.1.4b| | 1 |
Front Brake caliper|s| securing bolt|s| loose |3.2.A1j| | 1 |
Rear Brake caliper|s| securing bolt|s| loose |3.2.A1j| | 1 |
Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 1 |
Steering headbearing has excessive free play |2.2.2| | 1 |
Centre Rear Lower Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
Centre Rear Lower Rear mono-shock pivot excessively worn |2.4.B.4| | 1 |
Front wheel bearings are excessively tight |2.3.5b| | 1 |
Rear wheel rotation likely to be impeded |6.2.1b| | 1 |
Front Front wheel bearings have excessive free play |2.3.5b| | 1 |
Headlamp aim headlamp damaged and function impaired |1.2.3a| | 1 |
Offside Front Direction indicators not working |1.5.1c| | 1 |
Offside Rear Direction indicators flashing more than 120 times per minute |1.5.1c| | 1 |
Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Nearside Front Brake disc|s| insecure |3.2.A1g| | 1 |
Rear Rear reflector on motorcycle deteriorated and function impaired |1.4.2a| | 1 |
Offside Rear Direction indicator insecure |1.5.3b| | 1 |
Horn is not a constant note |1.7.3c| | 1 |
Steering headbearing excessively stiff or notchy (2.2.2 (f) (i)) | 1 |
Drive chain excessively tight, so that it is likely to fail (6.1.7 (k) (ii)) | 1 |
Stop lamp not working not working of front brake (4.3.1 (a) (ii)) | 1 |
Front Wheel has an excessively distorted bead rim. |4.2.2| | 1 |
Front Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
Front Horn not loud enough to be heard by another road user |1.7.3a| | 1 |
Front Clutch lever shortened so it cannot be readily operated. |6.2.1g| | 1 |
Offside Steering control has Insufficient clearance at full lock affecting the riders operation of the controls |2.1.2b| | 1 |
Offside Front suspension has inadequate damping effect. |2.3.6c| | 1 |
Brake pedal is inoperative |3.1.3c| | 1 |
Brake pedal has inadequate reserve travel |3.1.3b| | 1 |
Floor brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.C1b| | 1 |
Nearside Front Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Nearside Front Indicator switch insecure |1.5.4| | 1 |
Offside Front Position lamp switch insecure |1.1.4b| | 1 |
Front Horn not working |1.7.3a| | 1 |
Front Handlebar deformed |2.1.1b| | 1 |
Stop lamp not working (4.3.1 (a) (ii)) | 1 |
Drive chain horseshoe locking device incorrectly fitted (6.1.7 (j) (i)) | 1 |
Rear Brake disc fractured (1.1.14 (a) (ii)) | 1 |
Rear mono-shock pivot seized |2.4.B.4| | 1 |
Front suspension assembly component excessively corroded. |2.3.1| | 1 |
Handlebar grip missing (2.2.1 (d) (i)) | 1 |
Central Rear Lower Suspension rod attachment bracket/mounting insecure locking nut missing (5.3.3 (a) (i)) | 1 |
Offside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
Nearside Rear Footrest missing (6.2.12 (a)) | 1 |
Nearside Rear Footrest insecure bolt missing from footrest hanger (6.2.12 (a)) | 1 |
Front Direction indicator obviously incorrectly positioned (4.4.3 (a)) | 1 |
Rear Brake fluid not visible reservoir painted over so not visable (1.1.10 (d) (iii)) | 1 |
Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Rear Stop lamp not working |4.3.1 |a| |ii|| | 1 |
Nearside Direction indicators flashing more than 120 times per minute |1.5.1c| | 1 |
Rear Brake pipe excessively damaged |3.2.B2a| | 1 |
Offside Rear suspension bearing has excessive free play |2.4.A2a|i|| | 1 |
Rear Brake pedal mounting insecure |3.1.2a| | 1 |
Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i)) | 1 |
Rear Brake effort inadequate at a wheel (1.2.1 (a) (i)) | 1 |
Registration plate lamp issues | 1 |
Front Motorcycle structure joining/attachment plate or fastening insecure headlight bracket (6.1.1 (b) (i)) | 1 |
Front Steering operation fouling on the fuel tank or bodywork on full lock (2.1.4 (b)) | 1 |
All direction indicators not working (4.4.1 (a) (ii)) | 1 |
Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition (8.1.1 (a)) | 1 |
Front Valve stem seriously damaged (5.2.3 (j)) | 1 |
Rear Valve stem seriously damaged (5.2.3 (j)) | 1 |
Front Brake caliper insecure (1.1.16 (c) (i)) | 1 |
Front Brake component modification unsafe Front pads not adequately bearing on disc surface. (1.1.21 (d) (i)) | 1 |
Brake component insecure Rear caliper carrier. (1.1.21 (c)) | 1 |
Offside Headlamp lens seriously defective Dipping to right. (4.1.1 (b) (ii)) | 1 |
Brake performance not tested Front caliper insecure. (1.2.1 (g)) | 1 |
Nearside Rear Direction indicators flashing more than 120 times per minute |1.5.1c| | 1 |
Front Floor brake test indicates a severely grabbing brake |3.3.C2d| | 1 |
Headlamp aim not tested |1.6| | 1 |
Nearside Front Brake pipe inadequately supported |3.2.B2b| | 1 |
Rear Plate brake test indicates a binding brake |3.3.B1a| | 1 |
Front Front mudguard insecure |2.3.7| | 1 |
Front Headlamp aim beam image kick up to the offside |1.6| | 1 |
Rear Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
Front Stop lamp does not illuminate immediately a brake applies lever |1.3.1a| | 1 |
Offside Rear Brake fluid reservoir fluid level dangerously low |3.2.B1d| | 1 |
Direction indicators flashing more than 120 times per minute |1.5.1c| | 1 |
Front Brake component has restricted free movement and operation is likely to be impeded |3.2.A1h| | 1 |
Rear Brake disc|s| cracked |3.2.A1g| | 1 |
Rear Roller brake test indicates a sticking brake |3.3.A1a| | 1 |
Nearside Drive chain sprocket worn to excess |6.2.1e| | 1 |
Front Brake disc|s| insecure |3.2.A1g| | 1 |
Rear Brake disc|s| excessively pitted |3.2.A1l| | 1 |
Brake pedal insecure |3.1.2a| | 1 |
Headlamp aim beam image kick-up is to the offside |1.6.1| | 1 |
Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Front Plate brake test indicates a binding brake |3.3.B1a| | 1 |
Rear Roller brake test indicates brake effort fall disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
Front Brake lever has inadequate reserve travel |3.1.3b| | 1 |
Dipswitch does not deflect the main beam/s, making them into dipped beam/s |1.2.2b|ii|| | 1 |
Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
Rear Brake reaction bracket insecure |3.2.A1j| | 1 |
Rear suspension component excessively corroded. |2.4.A.1a| | 1 |
Front Hydraulic brake control feels spongy |3.1.4a| | 1 |
Brake lever mounting cracked |3.1.2c| | 1 |
Dipswitch does not extinquish main beam/s, leaving at least 1 dipped beam headlamp |1.2.2b|i|| | 1 |
Centre Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Centre Rear Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Centre Rear Rear suspension component excessively corroded. |2.4.A.1a| | 1 |
Centre Front Drive chain worn to excess |6.2.1e| | 1 |
Centre Rear Drive chain sprocket worn to excess |6.2.1e| | 1 |
Rear reflector on motorcycle damaged and function impaired |1.4.2a| | 1 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
Rear Floor brake test indicates a binding brake |3.3.C2c| | 1 |
Rear Lower Rear suspension component excessively corroded. |2.4.A.1a| | 1 |
Front Position lamp light intensity significantly reduced (4.2.3 (a) (ii)) | 1 |
Rear Brake pedal is inoperative |3.1.3c| | 1 |
Offside Rear Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
Offside Front Direction indicator not working |1.5.1c| | 1 |
Front Headlamp insecure |1.2.3b| | 1 |
Nearside Headlamp switch insecure |1.2.4| | 1 |
Front Headlamp aim headlamp damaged and function impaired |1.2.3a| | 1 |
Front Brake caliper|s| insecure |3.2.A1j| | 1 |
Rear Brake caliper|s| insecure |3.2.A1j| | 1 |
Rear Brake caliper|s| securing bolt|s| missing |3.2.A1j| | 1 |
Front Exhaust excessively deteriorated |7.1.1a| | 1 |
Front Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Rear Drive chain excessively loose |6.2.1d| | 1 |
Rear suspension fouling which affects the movement of the rear suspension |2.4.A.3a| | 1 |
Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Offside Rear Direction indicator not working |1.5.1c| | 1 |
Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
Rear suspension movement is excessively stiff |2.4.A.3b| | 1 |
Headlamp aim headlamp deteriorated and function impaired No clear beam pattern,low or high beam |1.2.3a| | 1 |
Front Front wheel bearings are excessively rough |2.3.5b| | 1 |
Brake pedal is so short and the brake cannot be readily applied |3.1.3c| | 1 |