MOT History from tests of petrol HYOSUNG GRANDPRIXs year 2003

Review the list of common HYOSUNG GRANDPRIX failures below or to perform a specific mot history check on your HYOSUNG then use our popular KnowYourCar service

mot history

Pass percent:66.04%

(The average a petrol HYOSUNG GRANDPRIX year 2003 passes without issue)

Based on:53 MOT Tests

Most common failures	No# failures
Headlamp aim beam image kick up to the offside \|1.6\|	5
Rear Brake lever has inadequate reserve travel \|3.1.3b\|	2
Rear wheel bearings have excessive free play \|2.4.A.2c\|	2
Front Stop lamp remains on when the brake is released \|1.3.1e\|	2
Front Roller brake test indicates a binding brake \|3.3.A1a\|	1
Rear Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	1
Headlamp aim out of alignment	1
Wheel alignment incorrect which adversely affects the handling \|2.5.1\|	1
Wheel alignment incorrect which adversely affects the steering \|2.5.1\|	1
Nearside Front Direction indicator damaged and function impaired \|1.5.3a\|	1
Rear All position lamps do not illuminate immediately when switched on \|1.1.3a\|	1
Rear Brake caliper\|s\| securing bolt\|s\| missing \|3.2.A1j\|	1
Offside Front Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	1
Rear Brake caliper\|s\| insecure \|3.2.A1j\|	1
Rear Brake lever is bent and the brake cannot be readily applied \|3.1.3c\|	1
Offside Front Front shock absorber seal failed and leaking oil \|2.3.3\|	1
Front suspension has inadequate damping effect. \|2.3.6c\|	1
Rear shock absorber has inadequate damping effect. \|2.4.A.3b\|	1
Registration plate issues	1
Rear wheel insecure \|4.2.3b\|	1
Front Direction indicator affected by the operation of another lamp \|1.5.1c\|	1
Rear Direction indicator affected by the operation of another lamp \|1.5.1c\|	1
Rear Stop lamp remains on when the brake is released \|1.3.1e\|	1
Brake master cylinder has a seized master cylinder pivot. \|3.2.B5\|	1
Rear Rear suspension fouling which affects the movement of the rear suspension \|2.4.A.3a\|	1
Floor brake test No brake control achieves an efficiency of 30%. \|3.3.C1a\|	1
Headlamp at least one does not illuminate on dipped beam \|1.2.2a\|i\|\|	1
Rear position lamp does not illuminate immediately when it is switched on \|1.1.3a\|	1
Rear Rear position lamp does not illuminate immediately when it is switched on \|1.1.3a\|	1
Offside Front Direction indicator not working \|1.5.1c\|	1
Offside Rear Direction indicator not working \|1.5.1c\|	1
Exhaust mounting missing \|7.1.1c\|	1

We get to these numbers by trawling through over 1 billion MOT test results since 2004 and crunched the numbers. We remove anything to do with Tyres, as they are model independent and group together common non-model specific issues. We are trying to get to a picture of what models have what issues.

Please note: We take the data from the DVSA. This data is raw and can contain typos and spelling mistakes that garages may have entered while recording a MOT result. Specifically miss-match on names of models and makes. We are constantly cleaning the data so bear with the odd issue.

Got suggestions? We’re improving this section all the time. If you have any suggestions, please let us know.

Most common failures	No# failures
Headlamp aim beam image kick up to the offside \|1.6\|	5
Rear Brake lever has inadequate reserve travel \|3.1.3b\|	2
Rear wheel bearings have excessive free play \|2.4.A.2c\|	2
Front Stop lamp remains on when the brake is released \|1.3.1e\|	2
Front Roller brake test indicates a binding brake \|3.3.A1a\|	1
Rear Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	1
Headlamp aim out of alignment	1
Wheel alignment incorrect which adversely affects the handling \|2.5.1\|	1
Wheel alignment incorrect which adversely affects the steering \|2.5.1\|	1
Nearside Front Direction indicator damaged and function impaired \|1.5.3a\|	1
Rear All position lamps do not illuminate immediately when switched on \|1.1.3a\|	1
Rear Brake caliper\|s\| securing bolt\|s\| missing \|3.2.A1j\|	1
Offside Front Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	1
Rear Brake caliper\|s\| insecure \|3.2.A1j\|	1
Rear Brake lever is bent and the brake cannot be readily applied \|3.1.3c\|	1
Offside Front Front shock absorber seal failed and leaking oil \|2.3.3\|	1
Front suspension has inadequate damping effect. \|2.3.6c\|	1
Rear shock absorber has inadequate damping effect. \|2.4.A.3b\|	1
Registration plate issues	1
Rear wheel insecure \|4.2.3b\|	1
Front Direction indicator affected by the operation of another lamp \|1.5.1c\|	1
Rear Direction indicator affected by the operation of another lamp \|1.5.1c\|	1
Rear Stop lamp remains on when the brake is released \|1.3.1e\|	1
Brake master cylinder has a seized master cylinder pivot. \|3.2.B5\|	1
Rear Rear suspension fouling which affects the movement of the rear suspension \|2.4.A.3a\|	1
Floor brake test No brake control achieves an efficiency of 30%. \|3.3.C1a\|	1
Headlamp at least one does not illuminate on dipped beam \|1.2.2a\|i\|\|	1
Rear position lamp does not illuminate immediately when it is switched on \|1.1.3a\|	1
Rear Rear position lamp does not illuminate immediately when it is switched on \|1.1.3a\|	1
Offside Front Direction indicator not working \|1.5.1c\|	1
Offside Rear Direction indicator not working \|1.5.1c\|	1
Exhaust mounting missing \|7.1.1c\|	1

MOT History from tests of petrol HYOSUNG GRANDPRIXs year 2003

Find us on Facebook