| Most common failures | No# failures |
|---|
| Headlamp aim out of alignment | 165 |
| Headlamp aim beam image kick up to the offside |1.6| | 135 |
| Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 81 |
| Drive chain excessively loose |6.2.1d| | 62 |
| Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 50 |
| Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 48 |
| Rear reflector on motorcycle missing |1.4.1| | 45 |
| Drive chain worn to excess |6.2.1e| | 43 |
| Rear Drive chain sprocket worn to excess |6.2.1e| | 38 |
| Rear Brake pedal has inadequate reserve travel |3.1.3b| | 32 |
| Exhaust is leaking and excessively noisey |7.1.1b| | 31 |
| Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 29 |
| Rear Roller brake test indicates a binding brake |3.3.A1a| | 28 |
| Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 27 |
| Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 27 |
| Front Headlamp aim beam image kick up to the offside |1.6| | 23 |
| Front position lamp does not illuminate immediately when switched on |1.1.3a| | 20 |
| Wheel alignment incorrect which adversely affects the handling |2.5.1| | 19 |
| Brake pedal has inadequate reserve travel |3.1.3b| | 17 |
| Drive chain excessively tight |6.2.1d| | 16 |
| Front Brake lever has inadequate reserve travel |3.1.3b| | 16 |
| Drive chain sprocket carrier worn to excess |6.2.1e| | 16 |
| Handlebar deformed |2.1.1b| | 16 |
| Rear Roller brake test indicates a sticking brake |3.3.A1a| | 16 |
| Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 16 |
| Registration plate issues | 16 |
| Front suspension has inadequate damping effect. |2.3.6c| | 15 |
| Nearside Rear Direction indicator not working |1.5.1c| | 15 |
| Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 14 |
| Direction indicators not working |1.5.1c| | 14 |
| Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 13 |
| Rear wheel bearings have excessive free play |2.4.A.2c| | 13 |
| Steering headbearing has excessive free play |2.2.2| | 13 |
| Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 11 |
| Fuel system component leaking |7.2.1a| | 10 |
| Front Headlamp aim beam image kick-up is to the offside |1.6.1| | 10 |
| Front Roller brake test indicates a binding brake |3.3.A1a| | 10 |
| Steering movement excessively stiff with the wheel raised |2.2.1b| | 10 |
| Nearside Rear Direction indicator insecure |1.5.3b| | 9 |
| Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 9 |
| Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 9 |
| Front Drive chain sprocket worn to excess |6.2.1e| | 9 |
| Horn not working |1.7.3a| | 9 |
| Headlamp insecure |1.2.3b| | 9 |
| Rear Rear reflector on motorcycle missing |1.4.1| | 9 |
| Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 8 |
| Rear Drive chain excessively loose |6.2.1d| | 8 |
| Headlamp dipped beam affected by the operation of another lamp |1.2.2c| | 8 |
| Rear Brake locking device missing |3.2.A1e| | 8 |
| Nearside Rear Direction indicator damaged and function impaired |1.5.3a| | 8 |
| Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 8 |
| Brake locking device missing |3.2.A1e| | 8 |
| Steering movement excessively stiff with the weight on the lower bearing |2.2.1a| | 8 |
| Rear reflector on motorcycle obscured |1.4.1| | 7 |
| Front Stop lamp remains on when the brake is released |1.3.1e| | 7 |
| Nearside Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 7 |
| Offside Front Footrest insecure |6.2.1a| | 7 |
| Offside Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 7 |
| Nearside Front Direction indicator not working |1.5.1c| | 7 |
| Front Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 7 |
| Nearside Rear Direction indicators not working |1.5.1c| | 6 |
| Rear Drive chain worn to excess |6.2.1e| | 6 |
| Nearside Rear Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 6 |
| Direction indicators affected by the operation of another lamp |1.5.1c| | 6 |
| Stop lamp affected by the operation of another lamp |1.3.2| | 6 |
| Nearside Front Footrest insecure |6.2.1a| | 6 |
| Front Handlebar deformed |2.1.1b| | 6 |
| Rear Floor brake test indicates a sticking brake |3.3.C2c| | 6 |
| Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 6 |
| Front Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 6 |
| Drive chain sprocket worn to excess |6.2.1e| | 6 |
| Rear Brake pedal cannot be released smoothly |3.1.3d| | 6 |
| Offside Rear Direction indicator not working |1.5.1c| | 6 |
| Offside Rear Direction indicators not working |1.5.1c| | 6 |
| Front Roller brake test indicates brake effort rise disproportional to brake lever or pedal effort |3.3.A1c| | 6 |
| Rear Rear wheel bearings have excessive free play |2.4.A.2c| | 6 |
| Brake lever has inadequate reserve travel |3.1.3b| | 6 |
| Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 5 |
| Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 5 |
| Offside Front shock absorber seal failed and leaking oil |2.3.3| | 5 |
| Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 5 |
| Front Brake fluid reservoir fluid level dangerously low |3.2.B1d| | 5 |
| Rear Brake lever has inadequate reserve travel |3.1.3b| | 5 |
| Rear Stop lamp does not emit a steady light |1.3.1b| | 5 |
| Throttle operating incorrectly |6.2.1f| | 5 |
| Exhaust excessively deteriorated |7.1.1a| | 5 |
| Rear Front position lamp does not illuminate immediately when switched on |1.1.3a| | 5 |
| Rear Direction indicators not working |1.5.1c| | 5 |
| Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 5 |
| Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 5 |
| Rear position lamp adversely affected by the operation of another lamp |1.1.3b| | 5 |
| Wheel alignment incorrect which adversely affects the steering |2.5.1| | 5 |
| Rear Wheel alignment incorrect which adversely affects the handling |2.5.1| | 5 |
| Stop lamp remains on when the brake is released |1.3.1e| | 5 |
| Headlamp aim beam image kick-up is to the offside |1.6.1| | 5 |
| Direction indicators flashing more than 120 times per minute |1.5.1c| | 5 |
| Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 5 |
| All position lamps adversely affected by the operation of another lamp |1.1.3b| | 5 |
| Nearside Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 4 |
| Offside Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 4 |
| Fuel cap sealing washer deteriorated |7.2.2c| | 4 |
| Riders seat insecure |6.2.1a| | 4 |
| Roller brake test No brake control achieves an efficiency of 30%. |3.3.A2a| | 4 |
| Front Direction indicators not working |1.5.1c| | 4 |
| Floor brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.C1b| | 4 |
| Offside Front Direction indicator not working |1.5.1c| | 4 |
| Rear Brake linkage has abnormal movement due to maladjustment |3.2.A1i| | 4 |
| Headlamp main beam affected by the operation of another lamp |1.2.2c| | 4 |
| Front Steering headbearing has excessive free play |2.2.2| | 4 |
| Rear Brake pedal is positioned so that the brake cannot be readily applied |3.1.3c| | 4 |
| Front Direction indicator not working |1.5.1c| | 4 |
| Rear Direction indicator not working |1.5.1c| | 4 |
| Front Wheel spoke excessively loose |4.2.1b| | 4 |
| Rear Roller brake test indicates brake effort rise disproportional to brake lever or pedal effort |3.3.A1c| | 4 |
| Front wheel bearings have excessive free play |2.3.5b| | 4 |
| Front Stop lamp does not emit a steady light |1.3.1b| | 4 |
| Front Front shock absorber seal failed and leaking oil |2.3.3| | 4 |
| Front Stop lamp not working (4.3.1 (a) (ii)) | 4 |
| Front Brake lever insecure |3.1.2a| | 4 |
| Rear Floor brake test indicates a binding brake |3.3.C2c| | 4 |
| Front suspension has excessive stiffness in the suspension movement. |2.3.6b| | 4 |
| Offside Rear Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 4 |
| Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 4 |
| Fuel cap does not fasten securely maintaining the sealing arrangement |7.2.2b| | 4 |
| Offside Direction indicator not working |1.5.1c| | 4 |
| Offside Rear Direction indicator insecure |1.5.3b| | 3 |
| Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 3 |
| Headlamp not working on main beam (4.1.1 (a) (ii)) | 3 |
| Stop lamp not working (4.3.1 (a) (ii)) | 3 |
| Drive chain so loose it is likely to fail (6.1.7 (c) (ii)) | 3 |
| Headlamp aim not tested |1.6| | 3 |
| Front shock absorber seal failed and leaking oil |2.3.3| | 3 |
| Fuel system component insecure |7.2.1b| | 3 |
| Offside Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 3 |
| Rear Footrest missing |6.2.1a| | 3 |
| Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 3 |
| Nearside Rear Footrest insecure |6.2.1a| | 3 |
| Rear position lamp incorrect colour |1.1.2b| | 3 |
| Direction indicators flashing less than 60 times a minute |1.5.1c| | 3 |
| Direction indicator flashing more than 120 times per minute |1.5.1c| | 3 |
| Offside Rear Footrest missing |6.2.1a| | 3 |
| Indicator switch defective |1.5.4| | 3 |
| Rear suspension bearing has excessive free play |2.4.A2a|i|| | 3 |
| Rear Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 3 |
| Rear Stop lamp not working (4.3.1 (a) (ii)) | 3 |
| Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 3 |
| Front Stop lamp missing |1.3.3a| | 3 |
| Front Front suspension has inadequate damping effect. |2.3.6c| | 3 |
| Front suspension assembly component excessively misaligned |2.3.1| | 3 |
| Offside Direction indicators not working |1.5.1c| | 3 |
| All position lamps do not illuminate immediately when switched on |1.1.3a| | 3 |
| Nearside Direction indicators not working |1.5.1c| | 3 |
| Rear Brake lining|s| less than 1.5 mm thick |3.2.A1f|i|| | 3 |
| Headlamp aim headlamp damaged and function impaired |1.2.3a| | 3 |
| Horn is not a constant note |1.7.3c| | 3 |
| Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i)) | 3 |
| Rear Roller brake test indicates a severely grabbing brake |3.3.A1b| | 3 |
| Front Hydraulic brake control feels spongy |3.1.4a| | 3 |
| Fuel hose leaking |7.2.1a| | 3 |
| Rear reflector missing (4.8.2 (a) (ii)) | 3 |
| Fuel tank leaking |7.2.1a| | 3 |
| Front wheel spindle securing nut locking device missing |2.3.5a| | 3 |
| Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 3 |
| Rear Position lamp not working (4.2.1 (a)) | 3 |
| Rear Roller brake test indicates a severely juddering brake |3.3.A1b| | 3 |
| Front Direction indicators flashing less than 60 times a minute |1.5.1c| | 3 |