| Most common failures | No# failures |
|---|
| Windscreen wiper does not clear the windscreen effectively | 4 |
| Headlamp aim out of alignment | 3 |
| Brake pipe excessively corroded | 3 |
| Registration plate lamp issues | 3 |
| Driver`s door cannot be opened from outside the vehicle |6.2.B.1b| | 2 |
| Horn not working |1.6.2a| | 2 |
| Offside Headlamp not working on main beam |1.7.5a| | 2 |
| Nearside Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 2 |
| Nearside Direction indicator adversely affected by the operation of another lamp |1.4.A.2h| | 1 |
| Nearside Rear position lamp|s| adversely affected by the operation of another lamp |1.1.A.3f| | 1 |
| Nearside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c)) | 1 |
| Nearside Stop lamp adversely affected by the operation of another lamp |1.2.1f| | 1 |
| Offside Stop lamp adversely affected by the operation of another lamp |1.2.1f| | 1 |
| Nearside Headlamp aim beam image kick up to the offside |1.8| | 1 |
| Offside Headlamp aim beam image kick up to the offside |1.8| | 1 |
| Offside Rear position lamp|s| adversely affected by the operation of another lamp |1.1.A.3f| | 1 |
| Rear fog lamp not working |1.3.2b| | 1 |
| Offside Rear rear parking |secondary| brake grabbing severely |3.7.B.6b| | 1 |
| Rear parking brake recording little or no effort | 1 |
| Parking brake: efficiency below requirements |3.7.B.7| | 1 |
| Offside Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 1 |
| Fuel cap/sealing device ineffective |6.1.3 |b| |i|| | 1 |
| Offside Rear wheel bearing has excessive play |2.6.2| | 1 |
| Offside Rear fog lamp not working |1.3.2b| | 1 |
| Nearside Headlamp insecure |1.7.3| | 1 |
| Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Offside Body has a sharp edge caused by damage |6.1.C.1| | 1 |
| Nearside Rear wheel bearing has excessive play |2.6.2| | 1 |
| Windscreen wiper blade insecure | 1 |
| Exhaust system not adequately supported |7.1.1| | 1 |
| Nearside Headlamp not working on dipped beam |1.7.5a| | 1 |
| Offside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c)) | 1 |
| Nearside Rear position lamp|s| adversely affected by the operation of another lamp Fog |1.1.A.3f| | 1 |
| Hazard warning switch faulty |1.4.B.1d| | 1 |
| Nearside Rear Rear position lamp|s| not working |1.1.A.3b| | 1 |
| Rear Rear position lamp|s| adversely affected by the operation of another lamp All lamps |1.1.A.3f| | 1 |
| Fuel tank leaking |7.2.3| | 1 |
| Exhaust system not adequately supported Rubbers split |7.1.1| | 1 |
| Nearside Front Front wheel bearing has excessive play |2.5.A.3c| | 1 |
| Rear Brake pipe inadequately supported |3.6.B.1| | 1 |
| Rear Brake valve leaking |3.6.A.1| | 1 |
| Nearside front brake binding |3.7.B.1| | 1 |
| Nearside Rear position lamp|s| not working |1.1.A.3b| | 1 |
| Nearside Stop lamp not working |1.2.1b| | 1 |
| Registration plate issues | 1 |
| Parking brake efficiency below requirements |1.4.2 |a| |i|| | 1 |
| Nearside Headlamp not working on dipped beam |4.1.1 |a| |ii|| | 1 |
| Power steering component insecure bottle support corroded through |2.1.5 |d| |i|| | 1 |
| Nearside Rear Position lamp not working |4.2.1 |a|| | 1 |
| Nearside Rear Direction indicator not working |4.4.1 |a| |ii|| | 1 |
| Rear Brake cable insecure | 1 |
| Exhaust system insecure rubbers missing |6.1.2 |a|| | 1 |
| Nearside Headlamp not in good working order adversely affecting beam image |1.2.4a| | 1 |
| Offside Headlamp not in good working order adversely affecting beam image |1.2.4a| | 1 |
| Offside Headlamp not working on main beam (4.1.1 (a) (ii)) | 1 |