MOT History from tests of diesel HYMER MOTORHOMEs year 1991

Review the list of common HYMER MOTORHOME failures below or to perform a specific mot history check on your HYMER then use our popular KnowYourCar service

mot history

Pass percent:50.00%

(The average a diesel HYMER MOTORHOME year 1991 passes without issue)

Based on:22 MOT Tests

Most common failures	No# failures
Headlamp aim out of alignment	6
Brakes imbalanced across an axle	3
Windscreen wiper does not clear the windscreen effectively	2
Horn not working \|1.6.2a\|	2
Nearside Headlamp aim beam image kick up to the offside \|1.8\|	2
Offside Headlamp aim beam image kick up to the offside \|1.8\|	2
Offside Rear Vehicle structure is cracked, seriously affecting its strength within 30cm of the body mountings \|6.1.B.2\|	1
Offside Rear fog lamp not working \|1.3.2b\|	1
Centre Exhaust has part of the system excessively deteriorated \|7.1.1a\|	1
Headlamp not in good working order adversely affecting beam image \|1.2.4a\|	1
Nearside Front position lamp\|s\| not working \|1.1.A.3b\|	1
Fuel cap/sealing device does not fasten securely by positive means \|7.2.4b\|	1
Track rod end ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt both sides \|2.2.C.1c\|	1
Ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt both drag link joints \|2.2.C.1c\|	1
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chasssis (5.3.6 (a) (i))	1
Nearside Rear Suspension component mounting prescribed area fractured significantly reducing structural strength chassis (5.3.6 (a) (i))	1
Nearside Headlamps matched pair are incorrectly positioned \|1.7.3\|	1
Offside Headlamps matched pair are incorrectly positioned \|1.7.3\|	1
Nearside Front constant velocity joint gaiter split \|2.5.C.1a\|	1
Offside Front wheel bearing has excessive play \|2.5.A.3c\|	1
Headlamp aim beam image kick up to the offside \|1.8\|	1
Service brake: efficiency below requirements \|3.7.B.7\|	1
Nearside Front Headlamp insecure \|1.7.3\|	1
Offside Front Headlamp insecure \|1.7.3\|	1
Nearside Front Headlamp aim beam image kick up to the offside \|1.8\|	1
Offside Front Headlamp aim beam image kick up to the offside \|1.8\|	1
Offside Rear Rear fog lamp insecure \|1.3.2a\|	1
Front Exhaust system not adequately supported \|7.1.1\|	1
Brake pipe excessively corroded	1

We get to these numbers by trawling through over 1 billion MOT test results since 2004 and crunched the numbers. We remove anything to do with Tyres, as they are model independent and group together common non-model specific issues. We are trying to get to a picture of what models have what issues.

Please note: We take the data from the DVSA. This data is raw and can contain typos and spelling mistakes that garages may have entered while recording a MOT result. Specifically miss-match on names of models and makes. We are constantly cleaning the data so bear with the odd issue.

Got suggestions? We’re improving this section all the time. If you have any suggestions, please let us know.

Most common failures	No# failures
Headlamp aim out of alignment	6
Brakes imbalanced across an axle	3
Windscreen wiper does not clear the windscreen effectively	2
Horn not working \|1.6.2a\|	2
Nearside Headlamp aim beam image kick up to the offside \|1.8\|	2
Offside Headlamp aim beam image kick up to the offside \|1.8\|	2
Offside Rear Vehicle structure is cracked, seriously affecting its strength within 30cm of the body mountings \|6.1.B.2\|	1
Offside Rear fog lamp not working \|1.3.2b\|	1
Centre Exhaust has part of the system excessively deteriorated \|7.1.1a\|	1
Headlamp not in good working order adversely affecting beam image \|1.2.4a\|	1
Nearside Front position lamp\|s\| not working \|1.1.A.3b\|	1
Fuel cap/sealing device does not fasten securely by positive means \|7.2.4b\|	1
Track rod end ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt both sides \|2.2.C.1c\|	1
Ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt both drag link joints \|2.2.C.1c\|	1
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chasssis (5.3.6 (a) (i))	1
Nearside Rear Suspension component mounting prescribed area fractured significantly reducing structural strength chassis (5.3.6 (a) (i))	1
Nearside Headlamps matched pair are incorrectly positioned \|1.7.3\|	1
Offside Headlamps matched pair are incorrectly positioned \|1.7.3\|	1
Nearside Front constant velocity joint gaiter split \|2.5.C.1a\|	1
Offside Front wheel bearing has excessive play \|2.5.A.3c\|	1
Headlamp aim beam image kick up to the offside \|1.8\|	1
Service brake: efficiency below requirements \|3.7.B.7\|	1
Nearside Front Headlamp insecure \|1.7.3\|	1
Offside Front Headlamp insecure \|1.7.3\|	1
Nearside Front Headlamp aim beam image kick up to the offside \|1.8\|	1
Offside Front Headlamp aim beam image kick up to the offside \|1.8\|	1
Offside Rear Rear fog lamp insecure \|1.3.2a\|	1
Front Exhaust system not adequately supported \|7.1.1\|	1
Brake pipe excessively corroded	1

MOT History from tests of diesel HYMER MOTORHOMEs year 1991

Find us on Facebook