MOT History from tests of diesel HYMER MOBILs year 1997

Review the list of common HYMER MOBIL failures below or to perform a specific mot history check on your HYMER then use our popular KnowYourCar service

mot history

Pass percent:55.56%

(The average a diesel HYMER MOBIL year 1997 passes without issue)

Based on:18 MOT Tests

Most common failures	No# failures
Windscreen wiper does not clear the windscreen effectively	7
Parking brake: efficiency below requirements \|3.7.B.7\|	5
Brake pipe excessively corroded	3
Nearside Front Upper Front position lamp\|s\| not working \|1.1.A.3b\|	2
Nearside Front position lamp\|s\| not working \|1.1.A.3b\|	2
Registration plate issues	2
Rear brake binding	2
Rear parking brake recording little or no effort	2
Brake hose excessively deteriorated	2
Offside Front Upper Front position lamp\|s\| not working \|1.1.A.3b\|	1
Rear Brake load sensing valve seized \|3.6.E.3\|	1
Nearside Front Stop lamp not working \|1.2.1b\|	1
Offside Rear position lamp\|s\| adversely affected by the operation of another lamp \|1.1.A.3f\|	1
Nearside Rear Rear position lamp\|s\| not working \|1.1.A.3b\|	1
Offside Front Front position lamp\|s\| excessively deteriorated so that it is not visible from a reasonable distance \|1.1.A.3d\|	1
Offside Rear Stop lamp adversely affected by the operation of another lamp \|1.2.1f\|	1
Battery insecure \|1.9.1\|	1
Rear fog lamp not working \|1.3.2b\|	1
Registration plate lamp issues	1
Nearside Rear Stop lamp not working \|1.2.1b\|	1
Nearside Headlamp not working on main beam \|1.7.5a\|	1
Brake load sensing valve seized \|3.6.E.3\|	1
Centre Brake cable has wires broken and is significantly weakened \|3.5.1b\|	1
Offside Rear Direction indicators not working \|1.4.A.2c\|	1
Rear fog lamp switch not operating in accordance with the requirements (4.5.3 (a))	1
Brake load sensing valve seized but ABS functioning (1.1.17 (c) (i))	1
Rear Prop shaft flexible coupling excessively deteriorated (6.1.7 (d) (i))	1
Offside Front Lower Steering linkage ball joint has excessive play (2.1.3 (b) (i))	1
Offside Front Anti-roll bar linkage pin or bush excessively worn (5.3.4 (a) (i))	1
Parking brake efficiency below requirements (1.4.2 (a) (i))	1
Offside Side repeater not working \|1.4.A.2c\|	1
Exhaust has a major leak of exhaust gases \|7.1.2\|	1
Parking brake efficiency less than 50% of the required value (1.4.2 (a) (ii))	1

We get to these numbers by trawling through over 1 billion MOT test results since 2004 and crunched the numbers. We remove anything to do with Tyres, as they are model independent and group together common non-model specific issues. We are trying to get to a picture of what models have what issues.

Please note: We take the data from the DVSA. This data is raw and can contain typos and spelling mistakes that garages may have entered while recording a MOT result. Specifically miss-match on names of models and makes. We are constantly cleaning the data so bear with the odd issue.

Got suggestions? We’re improving this section all the time. If you have any suggestions, please let us know.

Most common failures	No# failures
Windscreen wiper does not clear the windscreen effectively	7
Parking brake: efficiency below requirements \|3.7.B.7\|	5
Brake pipe excessively corroded	3
Nearside Front Upper Front position lamp\|s\| not working \|1.1.A.3b\|	2
Nearside Front position lamp\|s\| not working \|1.1.A.3b\|	2
Registration plate issues	2
Rear brake binding	2
Rear parking brake recording little or no effort	2
Brake hose excessively deteriorated	2
Offside Front Upper Front position lamp\|s\| not working \|1.1.A.3b\|	1
Rear Brake load sensing valve seized \|3.6.E.3\|	1
Nearside Front Stop lamp not working \|1.2.1b\|	1
Offside Rear position lamp\|s\| adversely affected by the operation of another lamp \|1.1.A.3f\|	1
Nearside Rear Rear position lamp\|s\| not working \|1.1.A.3b\|	1
Offside Front Front position lamp\|s\| excessively deteriorated so that it is not visible from a reasonable distance \|1.1.A.3d\|	1
Offside Rear Stop lamp adversely affected by the operation of another lamp \|1.2.1f\|	1
Battery insecure \|1.9.1\|	1
Rear fog lamp not working \|1.3.2b\|	1
Registration plate lamp issues	1
Nearside Rear Stop lamp not working \|1.2.1b\|	1
Nearside Headlamp not working on main beam \|1.7.5a\|	1
Brake load sensing valve seized \|3.6.E.3\|	1
Centre Brake cable has wires broken and is significantly weakened \|3.5.1b\|	1
Offside Rear Direction indicators not working \|1.4.A.2c\|	1
Rear fog lamp switch not operating in accordance with the requirements (4.5.3 (a))	1
Brake load sensing valve seized but ABS functioning (1.1.17 (c) (i))	1
Rear Prop shaft flexible coupling excessively deteriorated (6.1.7 (d) (i))	1
Offside Front Lower Steering linkage ball joint has excessive play (2.1.3 (b) (i))	1
Offside Front Anti-roll bar linkage pin or bush excessively worn (5.3.4 (a) (i))	1
Parking brake efficiency below requirements (1.4.2 (a) (i))	1
Offside Side repeater not working \|1.4.A.2c\|	1
Exhaust has a major leak of exhaust gases \|7.1.2\|	1
Parking brake efficiency less than 50% of the required value (1.4.2 (a) (ii))	1

MOT History from tests of diesel HYMER MOBILs year 1997

Find us on Facebook