MOT History from tests of diesel HYMER MOBILs year 1987

Review the list of common HYMER MOBIL failures below or to perform a specific mot history check on your HYMER then use our popular KnowYourCar service

mot history

Pass percent:42.86%

(The average a diesel HYMER MOBIL year 1987 passes without issue)

Based on:14 MOT Tests

Most common failures	No# failures
Registration plate lamp issues	1
Nearside Front Direction indicator flashing more than 120 times a minute \|1.4.A.2g\|	1
Indicator tell tale inoperative \|1.4.A.2a\|	1
Offside Front Front position lamp\|s\| not working \|1.1.A.3b\|	1
Nearside Rear Direction indicator not working \|1.4.A.2c\|	1
Rear fog lamp not working \|1.3.2b\|	1
Offside Front Headlamp aim beam image obviously incorrect \|1.8.A.1b\|	1
Headlamp aim out of alignment	1
Offside Front All position lamps not working \|1.1.A.3b\|	1
Nearside Front Seat belt retracting mechanism defective \|5.2.5b\|	1
Offside Front Headlamp not in good working order adversely affecting beam image \|1.2.4a\|	1
Nearside Front Headlamp not in good working order adversely affecting beam image \|1.2.4a\|	1
Offside Front Side repeater not working \|1.4.A.2c\|	1
Nearside Front Suspension component mounting prescribed area is excessively corroded \|2.4.A.3\|	1
Offside Front Suspension component mounting prescribed area is excessively corroded \|2.4.A.3\|	1
Offside Front brake disc excessively pitted \|3.5.1h\|	1
Nearside Rear Braking system leaking \|3.6.A.1\|	1
Brake pipe excessively corroded	1
Brake load sensing valve linkage seized \|3.6.E.3\|	1
Nearside Front Track rod end ball joint has excessive play \|2.2.B.1f\|	1
Nearside Rear Rear wheel bearing has excessive play \|2.6.2\|	1
Offside Rear Rear wheel bearing has excessive play \|2.6.2\|	1
Rear Stop lamp not working \|1.2.1b\|	1
Hazard warning lamps not flashing in phase, with ignition on \|1.4.B.1f\|	1
Nearside Front Front constant velocity joint gaiter split \|2.5.C.1a\|	1
Horn not working \|1.6.2a\|	1
Direction indicators not working \|1.4.A.2c\|	1
Offside Rear fog lamp adversely affected by the operation of another lamp \|1.3.2f\|	1
Front position lamp\|s\| adversely affected by the operation of another lamp \|1.1.A.3f\|	1
Offside Front Lower Suspension arm has excessive play in a ball joint \|2.4.G.2\|	1
Centre Exhaust system not adequately supported \|7.1.1\|	1
Front Exhaust has a major leak of exhaust gases \|7.1.2\|	1
Rear fog lamp not working \|4.5.1 \|a\| \|ii\|\|	1
Horn not working \|7.7 \|a\| \|ii\|\|	1

We get to these numbers by trawling through over 1 billion MOT test results since 2004 and crunched the numbers. We remove anything to do with Tyres, as they are model independent and group together common non-model specific issues. We are trying to get to a picture of what models have what issues.

Please note: We take the data from the DVSA. This data is raw and can contain typos and spelling mistakes that garages may have entered while recording a MOT result. Specifically miss-match on names of models and makes. We are constantly cleaning the data so bear with the odd issue.

Got suggestions? We’re improving this section all the time. If you have any suggestions, please let us know.

Most common failures	No# failures
Registration plate lamp issues	1
Nearside Front Direction indicator flashing more than 120 times a minute \|1.4.A.2g\|	1
Indicator tell tale inoperative \|1.4.A.2a\|	1
Offside Front Front position lamp\|s\| not working \|1.1.A.3b\|	1
Nearside Rear Direction indicator not working \|1.4.A.2c\|	1
Rear fog lamp not working \|1.3.2b\|	1
Offside Front Headlamp aim beam image obviously incorrect \|1.8.A.1b\|	1
Headlamp aim out of alignment	1
Offside Front All position lamps not working \|1.1.A.3b\|	1
Nearside Front Seat belt retracting mechanism defective \|5.2.5b\|	1
Offside Front Headlamp not in good working order adversely affecting beam image \|1.2.4a\|	1
Nearside Front Headlamp not in good working order adversely affecting beam image \|1.2.4a\|	1
Offside Front Side repeater not working \|1.4.A.2c\|	1
Nearside Front Suspension component mounting prescribed area is excessively corroded \|2.4.A.3\|	1
Offside Front Suspension component mounting prescribed area is excessively corroded \|2.4.A.3\|	1
Offside Front brake disc excessively pitted \|3.5.1h\|	1
Nearside Rear Braking system leaking \|3.6.A.1\|	1
Brake pipe excessively corroded	1
Brake load sensing valve linkage seized \|3.6.E.3\|	1
Nearside Front Track rod end ball joint has excessive play \|2.2.B.1f\|	1
Nearside Rear Rear wheel bearing has excessive play \|2.6.2\|	1
Offside Rear Rear wheel bearing has excessive play \|2.6.2\|	1
Rear Stop lamp not working \|1.2.1b\|	1
Hazard warning lamps not flashing in phase, with ignition on \|1.4.B.1f\|	1
Nearside Front Front constant velocity joint gaiter split \|2.5.C.1a\|	1
Horn not working \|1.6.2a\|	1
Direction indicators not working \|1.4.A.2c\|	1
Offside Rear fog lamp adversely affected by the operation of another lamp \|1.3.2f\|	1
Front position lamp\|s\| adversely affected by the operation of another lamp \|1.1.A.3f\|	1
Offside Front Lower Suspension arm has excessive play in a ball joint \|2.4.G.2\|	1
Centre Exhaust system not adequately supported \|7.1.1\|	1
Front Exhaust has a major leak of exhaust gases \|7.1.2\|	1
Rear fog lamp not working \|4.5.1 \|a\| \|ii\|\|	1
Horn not working \|7.7 \|a\| \|ii\|\|	1

MOT History from tests of diesel HYMER MOBILs year 1987

Find us on Facebook