Most common failures | No# failures |
---|
Rear reflector on motorcycle missing |1.4.1| | 8 |
Registration plate issues | 5 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 3 |
Drive chain worn to excess |6.2.1e| | 3 |
Horn not working |1.7.3a| | 2 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 2 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 2 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 2 |
Riders seat insecure |6.2.1a| | 2 |
Stop lamp not working (4.3.1 (a) (ii)) | 2 |
Rear Drive chain sprocket worn to excess |6.2.1e| | 2 |
Front Direction indicator not working |1.5.1c| | 2 |
Rear Direction indicator not working |1.5.1c| | 2 |
Drive chain excessively loose |6.2.1d| | 2 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 2 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 2 |
Rear Stop lamp not working |4.3.1 |a| |ii|| | 1 |
Brake lever attachment screws missing |3.1.2b| | 1 |
Lower Rear mono-shock pivot excessively worn |2.4.B.4| | 1 |
Rear suspension bearing has excessive free play |2.4.A2a|i|| | 1 |
Rear Brake fluid reservoir fluid level dangerously low |3.2.B1d| | 1 |
Rear Brake hose is likely to be fouled or trapped by moving parts |3.2.B2c| | 1 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
Rear wheel spindle securing nut locking device missing |2.4.A.2b| | 1 |
Front Front wheel bearings have excessive free play (2.3.5b) | 1 |
Rear Front wheel bearings have excessive free play (2.3.5b) | 1 |
Rear reflector missing (4.8.2 (a) (ii)) | 1 |
Rear Position lamp not working (4.2.1 (a)) | 1 |
Front Headlamp not working on main beam (4.1.1 (a) (ii)) | 1 |
Front Position lamp not working (4.2.1 (a)) | 1 |
Front Hydraulic brake control creeps under load. |3.1.4a| | 1 |
Rear Rear suspension movement is excessively stiff |2.4.A.3b| | 1 |
All direction indicators not working |4.4.1 |a| |ii|| | 1 |
Front Drive chain sprocket worn to excess |6.2.1e| | 1 |
Front Wheel has an excessively distorted bead rim. |4.2.2| | 1 |
Offside Footrest missing |6.2.1a| | 1 |
Front wheel bearings are excessively rough |2.3.5b| | 1 |
Horn missing |1.7.1| | 1 |
Front Stop lamp not working |4.3.1 |a| |ii|| | 1 |
Rear Drive chain excessively loose |6.2.1d| | 1 |
Horn not loud enough to be heard by another road user |1.7.3a| | 1 |
Stop lamp affected by the operation of another lamp |1.3.2| | 1 |
Direction indicators not working |1.5.1c| | 1 |
Rear Position lamp not working |4.2.1 |a|| | 1 |
Fuel system component leaking |7.2.1a| | 1 |
Rear Brake pedal so insecure that the brake cannot be readily applied (1.1.2 (e) (ii)) | 1 |
Stop lamp remains on when the brakes are released | 1 |
Front Wheel bearing has excessive play (5.1.3 (a) (i)) | 1 |
Registration plate lamp issues | 1 |
Front Brake lever is so short that the brake cannot be readily applied |1.1.2 |d|| | 1 |
Fuel system component leaking excessively or a risk of fire carburettor |6.1.3 |b| |ii|| | 1 |
Brake hose damaged | 1 |
Drive chain horseshoe locking device incorrectly fitted (6.1.7 (j) (i)) | 1 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
All position lamps do not illuminate immediately when switched on |1.1.3a| | 1 |
Front Direction indicators not working |1.5.1c| | 1 |
Rear Direction indicators not working |1.5.1c| | 1 |
Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Rear position lamp adversely affected by the operation of another lamp |1.1.3b| | 1 |