MOT History from tests of petrol HUSQVARNA TE510s year 2004

Review the list of common HUSQVARNA TE510 failures below or to perform a specific mot history check on your HUSQVARNA then use our popular KnowYourCar service

mot history

Pass percent:70.97%

(The average a petrol HUSQVARNA TE510 year 2004 passes without issue)

Based on:93 MOT Tests

Most common failures	No# failures
Registration plate issues	11
Headlamp aim out of alignment	9
Rear reflector on motorcycle missing \|1.4.1\|	9
Front wheel bearings have excessive free play \|2.3.5b\|	3
Rear position lamp does not illuminate immediately when it is switched on \|1.1.3a\|	3
Horn not working \|1.7.3a\|	3
Nearside Front shock absorber seal failed and leaking oil \|2.3.3\|	2
Headlamp at least one does not illuminate on dipped beam \|1.2.2a\|i\|\|	2
Headlamp at least one does not illuminate on main beam \|1.2.2a\|ii\|\|	2
Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	2
Rear Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	2
All position lamps adversely affected by the operation of another lamp \|1.1.3b\|	1
Front Stop lamp affected by the operation of another lamp \|1.3.2\|	1
Rear Stop lamp affected by the operation of another lamp \|1.3.2\|	1
Locking device\|s\| not correctly fitted which may make the motor bicycle dangerous to ride \|6.2.1h\|	1
Front wheel bearings are excessively rough \|2.3.5b\|	1
Offside Front Front shock absorber seal failed and leaking oil FORK SEAL FAILED \|2.3.3\|	1
Rear Front wheel bearings have excessive free play \|2.3.5b\|	1
Headlamp switch faulty \|1.2.4\|	1
Front Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	1
Exhaust excessively deteriorated \|7.1.1a\|	1
Horn control not functioning. \|1.7.2b\|	1
Front Wheel bearing rough when rotated (5.1.3 (b) (i))	1
Front Front wheel bearings have excessive free play \|2.3.5b\|	1
Rear Rear reflector on motorcycle missing \|1.4.1\|	1
Rear Wheel spoke excessively loose \|4.2.1b\|	1
Drive chain excessively loose \|6.2.1d\|	1
Headlamp aim so that beam "kick up" is not visible on the screen \|1.6.B.1\|	1
Horn not loud enough to be heard by another road user \|1.7.3a\|	1
Direction indicators not working \|1.5.1c\|	1
Stop lamp does not illuminate immediately a brake applies rear brake \|1.3.1a\|	1
Exhaust is leaking and excessively noisey \|7.1.1b\|	1

We get to these numbers by trawling through over 1 billion MOT test results since 2004 and crunched the numbers. We remove anything to do with Tyres, as they are model independent and group together common non-model specific issues. We are trying to get to a picture of what models have what issues.

Please note: We take the data from the DVSA. This data is raw and can contain typos and spelling mistakes that garages may have entered while recording a MOT result. Specifically miss-match on names of models and makes. We are constantly cleaning the data so bear with the odd issue.

Got suggestions? We’re improving this section all the time. If you have any suggestions, please let us know.

Most common failures	No# failures
Registration plate issues	11
Headlamp aim out of alignment	9
Rear reflector on motorcycle missing \|1.4.1\|	9
Front wheel bearings have excessive free play \|2.3.5b\|	3
Rear position lamp does not illuminate immediately when it is switched on \|1.1.3a\|	3
Horn not working \|1.7.3a\|	3
Nearside Front shock absorber seal failed and leaking oil \|2.3.3\|	2
Headlamp at least one does not illuminate on dipped beam \|1.2.2a\|i\|\|	2
Headlamp at least one does not illuminate on main beam \|1.2.2a\|ii\|\|	2
Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	2
Rear Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	2
All position lamps adversely affected by the operation of another lamp \|1.1.3b\|	1
Front Stop lamp affected by the operation of another lamp \|1.3.2\|	1
Rear Stop lamp affected by the operation of another lamp \|1.3.2\|	1
Locking device\|s\| not correctly fitted which may make the motor bicycle dangerous to ride \|6.2.1h\|	1
Front wheel bearings are excessively rough \|2.3.5b\|	1
Offside Front Front shock absorber seal failed and leaking oil FORK SEAL FAILED \|2.3.3\|	1
Rear Front wheel bearings have excessive free play \|2.3.5b\|	1
Headlamp switch faulty \|1.2.4\|	1
Front Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	1
Exhaust excessively deteriorated \|7.1.1a\|	1
Horn control not functioning. \|1.7.2b\|	1
Front Wheel bearing rough when rotated (5.1.3 (b) (i))	1
Front Front wheel bearings have excessive free play \|2.3.5b\|	1
Rear Rear reflector on motorcycle missing \|1.4.1\|	1
Rear Wheel spoke excessively loose \|4.2.1b\|	1
Drive chain excessively loose \|6.2.1d\|	1
Headlamp aim so that beam "kick up" is not visible on the screen \|1.6.B.1\|	1
Horn not loud enough to be heard by another road user \|1.7.3a\|	1
Direction indicators not working \|1.5.1c\|	1
Stop lamp does not illuminate immediately a brake applies rear brake \|1.3.1a\|	1
Exhaust is leaking and excessively noisey \|7.1.1b\|	1

MOT History from tests of petrol HUSQVARNA TE510s year 2004

Find us on Facebook