MOT History from tests of petrol HUSQVARNA TEs year 2001

Review the list of common HUSQVARNA TE failures below or to perform a specific mot history check on your HUSQVARNA then use our popular KnowYourCar service

mot history

Pass percent:77.60%

(The average a petrol HUSQVARNA TE year 2001 passes without issue)

Based on:125 MOT Tests

Most common failures	No# failures
Rear reflector on motorcycle missing \|1.4.1\|	5
Front Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	4
Headlamp aim out of alignment	3
Headlamp aim beam image kick up to the offside \|1.6\|	3
Horn not working \|1.7.3a\|	2
Rear position lamp does not illuminate immediately when it is switched on \|1.1.3a\|	2
Exhaust markings indicating not for road use or similar wording \|7.1.4\|	1
Rear Front mudguard insecure \|2.3.7\|	1
Front Brake disc\|s\| securing bolt\|s\| missing \|3.2.A1g\|	1
Front Brake lever has inadequate reserve travel \|3.1.3b\|	1
Rear Brake disc\|s\| cracked \|3.2.A1g\|	1
Rear position lamp insecure \|1.1.1c\|	1
Stop lamp remains on when the brakes are released	1
Registration plate lamp issues	1
Rear Position lamp not working (4.2.1 (a))	1
Rear reflector missing (4.8.2 (a) (ii))	1
Horn not working (7.7 (a))	1
Offside Front wheel spindle securing nut locking device missing \|2.3.5a\|	1
Rear Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	1
Headlamp aim headlamp deteriorated and function impaired \|1.2.3a\|	1
Rear Brake linkage has abnormal movement due to excessive wear \|3.2.A1i\|	1
Front Brake fluid reservoir insecurely mounted \|3.2.B1a\|	1
Front Brake disc\|s\| has excessive run out \|3.2.A1m\|	1
Front Lower Brake locking device missing \|3.2.A1e\|	1
Locking device\|s\| not correctly fitted which may make the motor bicycle dangerous to ride \|6.2.1h\|	1
Offside Handlebar handgrip not secure to handlebars. \|2.1.1c\|	1
Throttle operating incorrectly \|6.2.1f\|	1
Front suspension has inadequate damping effect. \|2.3.6c\|	1
Rear Stop lamp not working \|4.3.1 \|a\| \|ii\|\|	1
Nearside Front Direction indicator not working \|1.5.1c\|	1
Front Stop lamp deteriorated and function impaired \|1.3.3a\|	1
Nearside Front Front shock absorber seal failed and leaking oil \|2.3.3\|	1
Front Brake disc\|s\| friction surface contaminated by oil or grease \|3.2.A1k\|	1
Registration plate issues	1
Nearside Front shock absorber seal failed and leaking oil \|2.3.3\|	1
Headlamp insecure \|1.2.3b\|	1
Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	1
An item not tested \|Manual\|	1

We get to these numbers by trawling through over 1 billion MOT test results since 2004 and crunched the numbers. We remove anything to do with Tyres, as they are model independent and group together common non-model specific issues. We are trying to get to a picture of what models have what issues.

Please note: We take the data from the DVSA. This data is raw and can contain typos and spelling mistakes that garages may have entered while recording a MOT result. Specifically miss-match on names of models and makes. We are constantly cleaning the data so bear with the odd issue.

Got suggestions? We’re improving this section all the time. If you have any suggestions, please let us know.

Most common failures	No# failures
Rear reflector on motorcycle missing \|1.4.1\|	5
Front Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	4
Headlamp aim out of alignment	3
Headlamp aim beam image kick up to the offside \|1.6\|	3
Horn not working \|1.7.3a\|	2
Rear position lamp does not illuminate immediately when it is switched on \|1.1.3a\|	2
Exhaust markings indicating not for road use or similar wording \|7.1.4\|	1
Rear Front mudguard insecure \|2.3.7\|	1
Front Brake disc\|s\| securing bolt\|s\| missing \|3.2.A1g\|	1
Front Brake lever has inadequate reserve travel \|3.1.3b\|	1
Rear Brake disc\|s\| cracked \|3.2.A1g\|	1
Rear position lamp insecure \|1.1.1c\|	1
Stop lamp remains on when the brakes are released	1
Registration plate lamp issues	1
Rear Position lamp not working (4.2.1 (a))	1
Rear reflector missing (4.8.2 (a) (ii))	1
Horn not working (7.7 (a))	1
Offside Front wheel spindle securing nut locking device missing \|2.3.5a\|	1
Rear Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	1
Headlamp aim headlamp deteriorated and function impaired \|1.2.3a\|	1
Rear Brake linkage has abnormal movement due to excessive wear \|3.2.A1i\|	1
Front Brake fluid reservoir insecurely mounted \|3.2.B1a\|	1
Front Brake disc\|s\| has excessive run out \|3.2.A1m\|	1
Front Lower Brake locking device missing \|3.2.A1e\|	1
Locking device\|s\| not correctly fitted which may make the motor bicycle dangerous to ride \|6.2.1h\|	1
Offside Handlebar handgrip not secure to handlebars. \|2.1.1c\|	1
Throttle operating incorrectly \|6.2.1f\|	1
Front suspension has inadequate damping effect. \|2.3.6c\|	1
Rear Stop lamp not working \|4.3.1 \|a\| \|ii\|\|	1
Nearside Front Direction indicator not working \|1.5.1c\|	1
Front Stop lamp deteriorated and function impaired \|1.3.3a\|	1
Nearside Front Front shock absorber seal failed and leaking oil \|2.3.3\|	1
Front Brake disc\|s\| friction surface contaminated by oil or grease \|3.2.A1k\|	1
Registration plate issues	1
Nearside Front shock absorber seal failed and leaking oil \|2.3.3\|	1
Headlamp insecure \|1.2.3b\|	1
Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	1
An item not tested \|Manual\|	1

MOT History from tests of petrol HUSQVARNA TEs year 2001

Find us on Facebook