Most common failures | No# failures |
---|
Headlamp aim out of alignment | 7 |
Registration plate issues | 5 |
Rear reflector on motorcycle missing |1.4.1| | 3 |
Drive chain excessively loose (6.1.7 (c) (i)) | 3 |
Rear Drive chain sprocket worn to excess (6.1.7 (c) (i)) | 2 |
Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 2 |
Rear reflector missing (4.8.2 (a) (ii)) | 2 |
Registration plate lamp issues | 2 |
Headlamp aim projected beam image obviously incorrect (4.1.2 (c)) | 2 |
Nearside Front Direction indicator not working (4.4.1 (a) (ii)) | 2 |
Drive chain excessively loose |6.2.1d| | 2 |
Clutch lever bent so it cannot be readily operated (6.2.7 (b)) | 1 |
Dipswitch does not operate immediately when selected on dipped beam (4.1.3 (b)) | 1 |
Front Brake lever is so short that the brake cannot be readily applied (1.1.2 (d)) | 1 |
Rear Roller brake test indicates a binding brake |3.3.A1a| | 1 |
Handlebar deformed |2.1.1b| | 1 |
Nearside Rear Footrest missing |6.2.1a| | 1 |
Offside Rear Footrest missing |6.2.1a| | 1 |
Horn sounds harsh or grating |1.7.3c| | 1 |
Nearside Indicator switch insecure |1.5.4| | 1 |
Front Brake lever is damaged and the brake cannot be readily applied |3.1.3c| | 1 |
Headlamp insecure |1.2.3b| | 1 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Nearside Rear Direction indicator not working |1.5.1c| | 1 |
Offside Rear Direction indicator not working |1.5.1c| | 1 |
All direction indicators adversely affected by the operation of another lamp (4.4.3 (b)) | 1 |
Front Headlamp light intensity severely reduced (4.1.4 (a)) | 1 |
Drive chain so worn it is likely to fail (6.1.7 (c) (ii)) | 1 |
Front Drive chain sprocket worn to excess (6.1.7 (c) (i)) | 1 |
Nearside Front Wheel fixing loose |multiple fixings| bolt damaged |5.2.1 |a| |i|| | 1 |
Rear reflector on motorcycle obscured "L" plate fitted over reflector |1.4.2b| | 1 |
Horn not working |1.7.3a| | 1 |
Rear Position lamp not working (4.2.1 (a)) | 1 |
Drive chain horseshoe locking device incorrectly fitted (6.1.7 (j) (i)) | 1 |
Front Headlamp light source and lamp not compatible (4.1.4 (c)) | 1 |
Headlamp light source and lamp not compatible (4.1.4 (c)) | 1 |
Nearside Rear Drive chain horseshoe locking device incorrectly fitted splitlink open end in forward rotation |6.1.7 |j| |i|| | 1 |
Rear Rear reflector on motorcycle missing |1.4.1| | 1 |
Horn not working (7.7 (a) (ii)) | 1 |
Nearside Rear Direction indicator missing (4.4.1 (a) (ii)) | 1 |
Offside Rear Direction indicator missing (4.4.1 (a) (ii)) | 1 |
Drive chain worn to excess (6.1.7 (c) (i)) | 1 |
Offside Front Direction indicator not working (4.4.1 (a) (ii)) | 1 |
Rear Stop lamp not working (4.3.1 (a) (ii)) | 1 |
Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
Offside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
Offside Rear Direction indicator not working (4.4.1 (a) (ii)) | 1 |
Clutch lever shortened so it cannot be readily operated. |6.2.1g| | 1 |
Brake lever is so short and the brake cannot be readily applied |3.1.3c| | 1 |
All direction indicators not working (4.4.1 (a) (ii)) | 1 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
Clutch lever shortened so it cannot be readily operated. lever snapped |6.2.1g| | 1 |
Front Brake lever is damaged and the brake cannot be readily applied lever snapped |3.1.3c| | 1 |
Nearside Rear Direction indicator insecure |1.5.3b| | 1 |
Offside Rear Direction indicator insecure |1.5.3b| | 1 |
Horn sound not in accordance with requirements (7.7 (c)) | 1 |
Front Horn not working |7.7 |a| |ii|| | 1 |
Nearside Front Direction indicator not working |4.4.1 |a| |ii|| | 1 |
Front Headlamp not working on dipped beam |4.1.1 |a| |ii|| | 1 |
Headlamp aim not tested |4.1.2 |b|| | 1 |
Rear Wheel bearing has excessive play |5.1.3 |a| |i|| | 1 |
Offside Rear Direction indicator with a multiple light source more than 1/2 not functioning (4.4.1 (a) (ii)) | 1 |
Handlebar grip insecure to handlebar (2.2.1 (d) (ii)) | 1 |