MOT History from tests of petrol HONDA Z600s year 1990

Review the list of common HONDA Z600 failures below or to perform a specific mot history check on your HONDA then use our popular KnowYourCar service

mot history

Pass percent:44.44%

(The average a petrol HONDA Z600 year 1990 passes without issue)

Based on:18 MOT Tests

Most common failures	No# failures
Nearside Front Suspension component mounting prescribed area is excessively corroded \|2.4.A.3\|	2
Parking brake: efficiency below requirements \|3.7.B.7\|	2
Rear parking brake recording little or no effort	2
Offside Front position lamp\|s\| not working \|1.1.A.3b\|	1
Offside Stop lamp not working \|1.2.1b\|	1
Front Exhaust has a major leak of exhaust gases \|7.1.2\|	1
Nearside Rear Radius arm rubber bush deteriorated resulting in excessive movement \|2.4.G.2\|	1
Offside Front Suspension component mounting prescribed area is excessively corroded \|2.4.A.3\|	1
Anti-lock braking system warning lamp indicates an ABS fault	1
Registration plate issues	1
Centre Exhaust has a major leak of exhaust gases \|7.1.2\|	1
Centre Exhaust system not adequately supported \|7.1.1\|	1
Nearside Front Sub-frame corroded and seriously weakened \|2.4.G.1\|	1
Offside Front Sub-frame corroded and seriously weakened \|2.4.G.1\|	1
Nearside Outer Rear Suspension component mounting prescribed area is excessively corroded \|2.4.A.3\|	1
Nearside Rear Body has a sharp edge caused by corrosion \|6.1.C.1\|	1
Windscreen has damage	1
Nearside Outer Seat belt anchorage prescribed area is excessively corroded \|5.2.6\|	1
Nearside Front Suspension arm has excessive play in a ball joint \|2.4.G.2\|	1
Service brake: efficiency below requirements \|3.7.B.7\|	1
Front Sub-frame corroded and seriously weakened \|2.4.G.1\|	1
Offside Front Front constant velocity joint gaiter insecurely mounted to its housing \|2.5.C.1a\|	1
Nearside Front Windscreen wiper blade deteriorated \|8.2.2\|	1
Service brake: efficiency below requirements \|3.7.C.1a\|	1
Parking brake: efficiency below requirements \|3.7.C.1b\|	1
Offside Front Subframe mounting prescribed area is excessively corroded \|2.4.A.3\|	1
Nearside Rear Trailing arm rubber bush deteriorated resulting in excessive movement \|2.4.G.2\|	1
Nearside rear brake recording little or no effort \|3.7.B.5a\|	1
Registration plate lamp issues	1
Fuel tank leaking \|7.2.3\|	1

We get to these numbers by trawling through over 1 billion MOT test results since 2004 and crunched the numbers. We remove anything to do with Tyres, as they are model independent and group together common non-model specific issues. We are trying to get to a picture of what models have what issues.

Please note: We take the data from the DVSA. This data is raw and can contain typos and spelling mistakes that garages may have entered while recording a MOT result. Specifically miss-match on names of models and makes. We are constantly cleaning the data so bear with the odd issue.

Got suggestions? We’re improving this section all the time. If you have any suggestions, please let us know.

Most common failures	No# failures
Nearside Front Suspension component mounting prescribed area is excessively corroded \|2.4.A.3\|	2
Parking brake: efficiency below requirements \|3.7.B.7\|	2
Rear parking brake recording little or no effort	2
Offside Front position lamp\|s\| not working \|1.1.A.3b\|	1
Offside Stop lamp not working \|1.2.1b\|	1
Front Exhaust has a major leak of exhaust gases \|7.1.2\|	1
Nearside Rear Radius arm rubber bush deteriorated resulting in excessive movement \|2.4.G.2\|	1
Offside Front Suspension component mounting prescribed area is excessively corroded \|2.4.A.3\|	1
Anti-lock braking system warning lamp indicates an ABS fault	1
Registration plate issues	1
Centre Exhaust has a major leak of exhaust gases \|7.1.2\|	1
Centre Exhaust system not adequately supported \|7.1.1\|	1
Nearside Front Sub-frame corroded and seriously weakened \|2.4.G.1\|	1
Offside Front Sub-frame corroded and seriously weakened \|2.4.G.1\|	1
Nearside Outer Rear Suspension component mounting prescribed area is excessively corroded \|2.4.A.3\|	1
Nearside Rear Body has a sharp edge caused by corrosion \|6.1.C.1\|	1
Windscreen has damage	1
Nearside Outer Seat belt anchorage prescribed area is excessively corroded \|5.2.6\|	1
Nearside Front Suspension arm has excessive play in a ball joint \|2.4.G.2\|	1
Service brake: efficiency below requirements \|3.7.B.7\|	1
Front Sub-frame corroded and seriously weakened \|2.4.G.1\|	1
Offside Front Front constant velocity joint gaiter insecurely mounted to its housing \|2.5.C.1a\|	1
Nearside Front Windscreen wiper blade deteriorated \|8.2.2\|	1
Service brake: efficiency below requirements \|3.7.C.1a\|	1
Parking brake: efficiency below requirements \|3.7.C.1b\|	1
Offside Front Subframe mounting prescribed area is excessively corroded \|2.4.A.3\|	1
Nearside Rear Trailing arm rubber bush deteriorated resulting in excessive movement \|2.4.G.2\|	1
Nearside rear brake recording little or no effort \|3.7.B.5a\|	1
Registration plate lamp issues	1
Fuel tank leaking \|7.2.3\|	1

MOT History from tests of petrol HONDA Z600s year 1990

Find us on Facebook