Most common failures | No# failures |
---|
Registration plate issues | 36 |
Headlamp aim out of alignment | 24 |
Rear reflector on motorcycle missing |1.4.1| | 20 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 10 |
Horn not working |1.7.3a| | 9 |
Front wheel bearings have excessive free play |2.3.5b| | 8 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 7 |
Rear Wheel spoke excessively loose |4.2.1b| | 7 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 6 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 6 |
Front Wheel spoke excessively loose |4.2.1b| | 6 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 5 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 4 |
Throttle operating incorrectly |6.2.1f| | 4 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 4 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 4 |
Headlamp aim beam image kick up to the offside |1.6| | 3 |
Horn missing |1.7.1| | 3 |
Direction indicators not working |1.5.1c| | 3 |
Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 3 |
Rear Brake disc|s| excessively worn |3.2.A1l| | 3 |
Drive chain excessively loose |6.2.1d| | 3 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 3 |
Front Front wheel bearings have excessive free play |2.3.5b| | 3 |
Rear Rear reflector on motorcycle missing |1.4.1| | 3 |
Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 2 |
Headlamp not working on dipped beam |4.1.1 |a| |ii|| | 2 |
Offside Rear Direction indicator not working |1.5.1c| | 2 |
Offside Front Direction indicator not working |1.5.1c| | 2 |
Headlamp aim headlamp deteriorated and function impaired |1.2.3a| | 2 |
Front Stop lamp remains on when the brake is released |1.3.1e| | 2 |
Central Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 2 |
Headlamp aim not tested |1.6| | 2 |
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 2 |
Front wheel bearings are excessively rough |2.3.5b| | 2 |
Rear Rear wheel bearings have excessive free play |2.4.A.2c| | 2 |
Front Brake disc|s| excessively worn |3.2.A1l| | 2 |
Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 2 |
Rear Roller brake test indicates a binding brake |3.3.A1a| | 2 |
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 2 |
Front Horn missing |1.7.1| | 2 |
Horn control not readily accesible. |1.7.2a| | 1 |
Stop lamp affected by the operation of another lamp |1.3.2| | 1 |
Headlamp dipped beam affected by the operation of another lamp |1.2.2c| | 1 |
Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
Clutch lever positioned so it cannot be readily operated. |6.2.1g| | 1 |
Front Horn not working |1.7.3a| | 1 |
Front Stop lamp does not illuminate immediately a brake applies Front brake light switch |1.3.1a| | 1 |
Nearside Front Direction indicator insecure |1.5.3b| | 1 |
Nearside Rear Direction indicator not working |1.5.1c| | 1 |
Rear position lamp damaged and function impaired |1.1.1b| | 1 |
Offside Rear Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
Roller brake test indicates a binding brake |3.3.A1a| | 1 |
Headlamp not working on main beam |4.1.1 |a| |ii|| | 1 |
Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Steering headbearing has excessive free play |2.2.2| | 1 |
Headlamp insecure |1.2.3b| | 1 |
Indicator switch insecure |1.5.4| | 1 |
Rear Brake locking device missing |3.2.A1e| | 1 |
Exhaust has part of the system missing |7.1.1a| | 1 |
Rear Wheel alignment incorrect which adversely affects the handling poorly adjusted on rear chain adjusters |2.4 |a|| | 1 |
Nearside Front Upper Horn control not readily accesible. |1.7.2a| | 1 |
Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
Steering control fouling between components which interferes with the free movement of the steering |2.1.2a| | 1 |
Front position lamp flickers when tapped lightly by hand |1.1.3c| | 1 |
Stop lamp damaged and function impaired |1.3.3a| | 1 |
Drive chain sprocket carrier worn to excess |6.2.1e| | 1 |
Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 1 |
Offside Front Footrest insecure |6.2.1a| | 1 |
Front wheel spindle securing nut|s| loose |2.3.3a| | 1 |
Nearside Direction indicators flashing more than 120 times per minute |1.5.1c| | 1 |
Offside Direction indicators flashing more than 120 times per minute |1.5.1c| | 1 |
Locking devices not correctly fitted which may make the motor bicycle dangerous to ride Split link missing from drive chain |6.2.1h| | 1 |
Front Brake lever is positioned so that the brake cannot be readily applied |3.1.3c| | 1 |
Front Brake hose fouling |3.2.B3b| | 1 |
Front Upper Throttle operating incorrectly |6.2.1f| | 1 |
Offside Rear Direction indicators not working |1.5.1c| | 1 |
Rear Front wheel bearings have excessive free play |2.3.5b| | 1 |
Offside Rear Direction indicator insecure |1.5.3b| | 1 |
Front Wheel has an excessively distorted bead rim. |4.2.2| | 1 |
Steering control fouling between components which interferes with the free movement of the steering fouls tank |2.1.2a| | 1 |
Nearside Steering lock stop ineffective |2.1.3| | 1 |
Offside Steering lock stop ineffective |2.1.3| | 1 |
Fuel system component leaking |7.2.1a| | 1 |
Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Rear Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Rear position lamp incorrect colour |1.1.2b| | 1 |
Rear Drive chain sprocket worn to excess |6.2.1e| | 1 |
Drive chain worn to excess |6.2.1e| | 1 |
All position lamps do not illuminate immediately when switched on |1.1.3a| | 1 |
Horn not working |7.7 |a| |ii|| | 1 |
Rear reflector on sidecar missing |1.4.1| | 1 |
Horn not loud enough to be heard by another road user |1.7.3a| | 1 |
Centre Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Centre Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Front Brake lever is so short and the brake cannot be readily applied |3.1.3c| | 1 |
Rear Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 1 |
Rear Stop lamp missing |1.3.3a| | 1 |
Front Stop lamp missing |1.3.3a| | 1 |
Front Brake disc|s| has excessive run out |3.2.A1m| | 1 |
Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Nearside Front Floor brake test indicates a binding brake |3.3.C2c| | 1 |
Offside Rear Floor brake test indicates a sticking brake |3.3.C2c| | 1 |
Rear wheel bearings are excessively rough |2.4.A.2c| | 1 |
Steering movement excessively rough with the weight on the lower bearing |2.2.1a| | 1 |
Front Wheel fractured significantly reducing the original strength |4.2.1a| | 1 |
Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
Rear suspension bearing has excessive free play |2.4.A2a|i|| | 1 |
Rear reflector on motorcycle missing replaced / fitted new one. |1.4.1| | 1 |
Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 1 |
Rear Direction indicator incorrect colour |1.5.1b| | 1 |
Front Brake disc|s| insecure |3.2.A1g| | 1 |
Rear reflector on motorcycle obscured |1.4.1| | 1 |
Headlamp dipped beam flickers when tapped lightly by hand |1.2.2c| | 1 |
Roller brake test No brake control achieves an efficiency of 30%. |3.3.A2a| | 1 |
Roller brake test Neither brake control achieves an efficiency of 25% |3.3.A2b| | 1 |
Front position lamp adversely affected by the operation of another lamp |1.1.3b| | 1 |
Front Upper Steering headbearing excessively stiff or notchy |2.2.2 |f| |i|| | 1 |
Front Wheel alignment incorrect which adversely affects the steering wheel too far out due to spacer |2.4 |a|| | 1 |
Nearside Handlebar grip insecure to handlebar (2.2.1 (d) (ii)) | 1 |
Front Position lamp not working (4.2.1 (a)) | 1 |
Drive chain excessively loose (6.1.7 (c) (i)) | 1 |
Rear Wheel alignment incorrect which adversely affects the handling (2.4 (a)) | 1 |
Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 1 |
Headlamp not working on main beam (4.1.1 (a) (ii)) | 1 |
Rear Position lamp not working (4.2.1 (a)) | 1 |
Rear Rear reflector defective or damaged by more than 50% of the reflecting surface (4.8.1 (a) (ii)) | 1 |
Front Wheel spindle loose (5.2.1 (c) (i)) | 1 |
Registration plate lamp issues | 1 |
Rear reflector missing (4.8.2 (a) (ii)) | 1 |
Front Wheel bearing has excessive play (5.1.3 (a) (i)) | 1 |