Most common failures | No# failures |
---|
Registration plate issues | 18 |
Headlamp aim out of alignment | 12 |
Rear reflector on motorcycle missing |1.4.1| | 9 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 6 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 6 |
Horn not working |1.7.3a| | 4 |
Headlamp aim beam image kick up to the offside |1.6| | 4 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 4 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 3 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 3 |
Front Front wheel bearings have excessive free play |2.3.5b| | 3 |
Horn missing |1.7.1| | 3 |
Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 3 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 3 |
Offside Rear Direction indicator not working (4.4.1 (a) (ii)) | 3 |
Dipswitch does not extinquish main beam/s, leaving at least 1 dipped beam headlamp |1.2.2b|i|| | 2 |
Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 2 |
Front Horn not working |1.7.3a| | 2 |
Handlebar handgrip not secure to handlebars. |2.1.1c| | 2 |
Rear Brake disc|s| excessively worn |3.2.A1l| | 2 |
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 2 |
Steering headbearing has excessive free play |2.2.2| | 2 |
Front wheel bearings have excessive free play |2.3.5b| | 2 |
Rear Wheel spoke excessively loose |4.2.1b| | 2 |
Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 2 |
Rear reflector missing (4.8.2 (a) (ii)) | 2 |
Roller brake test indicates a binding brake |3.3.A1a| | 1 |
Headlamp dipped beam affected by the operation of another lamp |1.2.2c| | 1 |
Headlamp main beam affected by the operation of the horn |1.2.2c| | 1 |
Dipswitch does not deflect the main beam/s, making them into dipped beam/s |1.2.2b|ii|| | 1 |
Horn is not continous or uniform |1.7.3c| | 1 |
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Nearside Front Direction indicator missing |1.5.1a| | 1 |
Offside Front Direction indicator missing |1.5.1a| | 1 |
Offside Rear Brake disc|s| excessively worn |3.2.A1l| | 1 |
Rear Floor brake test indicates a binding brake |3.3.C2c| | 1 |
Rear position lamp adversely affected by the operation of another lamp |1.1.3b| | 1 |
Rear position lamp incorrect colour |1.1.2b| | 1 |
Rear Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
Rear Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Rear wheel rotation likely to be impeded |6.2.1b| | 1 |
Front Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
Direction indicators not working |1.5.1c| | 1 |
Offside Rear Direction indicator not working |4.4.1 |a| |ii|| | 1 |
Rear Rear reflector on motorcycle missing |1.4.1| | 1 |
Front Front suspension has inadequate damping effect. |2.3.6c| | 1 |
Fuel tank leaking tap |7.2.1a| | 1 |
Nearside Rear wheel insecure |4.2.3b| | 1 |
Drive chain worn to excess |6.2.1e| | 1 |
Front wheel spindle securing nut locking device missing |2.3.3a| | 1 |
Headlamp main beam affected by the operation of another lamp |1.2.2c| | 1 |
Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
Lower Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
Nearside Front Upper Indicator switch does not operate the direction indicators on the side selected |1.5.4| | 1 |
Offside Front Upper Indicator switch does not operate the direction indicators on the side selected |1.5.4| | 1 |
Rear Stop lamp not working |4.3.1 |a| |ii|| | 1 |
Headlamp not working on dipped beam |4.1.1 |a| |ii|| | 1 |
Rear Front wheel bearings have excessive free play |2.3.5b| | 1 |
Front Wheel has an excessively distorted bead rim. |4.2.2| | 1 |
Direction indicators flashing more than 120 times per minute |1.5.1c| | 1 |
Throttle operating incorrectly |6.2.1f| | 1 |
Headlamp deteriorated and function impaired |1.2.3a| | 1 |
Front Wheel has an excessively eccentric bead rim. |4.2.2| | 1 |
Front Front wheel bearings are excessively rough |2.3.5b| | 1 |
Front Wheel spoke missing |4.2.1b| | 1 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
Front wheel bearings are excessively rough |2.3.5b| | 1 |
Front Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 1 |
Drive chain excessively tight |6.2.1d| | 1 |
Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 1 |
Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Brake lever mounting cracked |3.1.2c| | 1 |
Nearside Front Direction indicators not working |1.5.1c| | 1 |
Centre Rear Rear reflector on motorcycle missing |1.4.1| | 1 |
Offside Front Direction indicators not working |1.5.1c| | 1 |
Nearside Rear Direction indicators not working |1.5.1c| | 1 |
All position lamps do not illuminate immediately when switched on |1.1.3a| | 1 |
Centre Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Centre Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Nearside Position lamp switch insecure |1.1.4b| | 1 |
Exhaust markings indicating not for road use or similar wording |7.1.4| | 1 |
Steering movement excessively stiff with the weight on the lower bearing |2.2.1a| | 1 |
Exhaust excessively deteriorated |7.1.1a| | 1 |
Offside Rear Direction indicator not working |1.5.1c| | 1 |
Centre Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
Nearside Front Horn missing |1.7.1| | 1 |
Rear Wheel bearing has excessive play |5.1.3 |a| |i|| | 1 |
Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Chain guard insecure (6.2.1c) | 1 |
Roller brake test No brake control achieves an efficiency of 30%. (3.3.A2a) | 1 |
Roller brake test Neither brake control achieves an efficiency of 25% (3.3.A2b) | 1 |
Headlamp not working on main beam (4.1.1 (a) (ii)) | 1 |
Rear Direction indicator obviously incorrectly positioned (4.4.3 (a)) | 1 |
Position lamp adversely affected by the operation of another lamp (4.2.3 (b)) | 1 |
Horn not working (7.7 (a) (ii)) | 1 |
Rear Wheel spoke missing x1 (5.2.2 (d)) | 1 |
Rear reflector on motorcycle incorrectly positioned (1.4.2d) | 1 |
Rear reflector on motorcycle missing (1.4.1) | 1 |
Stop lamp affected by the operation of another lamp (1.3.2) | 1 |
Throttle has a significant change in engine speed whilst moving the steering from lock to lock (2.1.4) | 1 |
Registration plate lamp issues | 1 |
Headlamp lens seriously defective (4.1.1 (b) (ii)) | 1 |
Nearside Rear reflector on motorcycle missing (1.4.1) | 1 |
Front Wheel bearing has excessive play (5.1.3 (a) (i)) | 1 |
Front Wheel bearing rough when rotated (5.1.3 (b) (i)) | 1 |
Stop lamp remains on when the brakes are released | 1 |
Rear Shock absorber has negligible damping effect (5.3.2 (b)) | 1 |
Front Position lamp adversely affected by the operation of another lamp (4.2.3 (b)) | 1 |
Horn not working (7.7 (a)) | 1 |
Front Brake caliper insecure Pad pin (1.1.16 (c) (i)) | 1 |